Tender For Special Repair To Bldg No P-135 Single Living Or Accn Of 306 Asc Fd Hosp Under Ge (East) Bareilly; 1 Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. 2 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 3 Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and jointed in any mortar etc complete all as specified and directed. 4 Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed. 5 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 6 Excavating in trenches n. exc. 1.5 m wide, and n.exc. 1.5 m in depth for foundation etc. n.exc. 10 sqm on plan and n. exc. 1.5 mtr in depth and getting out soft/ loose soil complete all as specified and directed. 7 Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. 8 Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. 9 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 10 Taking up or down 15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 11 Taking up or down 20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 12 Dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified and directed. 13 M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed . 14 M&L for 25 mm thick PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in floors to receive surface of tiles complete all as specified and directed. 15 M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. 16 M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. 17 M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. 18 M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in vertical surface suh as skirting or dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. 19 M&L for machine cut kota stone slab flooring 20-25 mm thick over and including 20 mm cement screed bed in CM 1:6 laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed. 20 S&F 18-20 mm thick green marble work (table rubbed and polished) in riser & steps, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including moulding and nosing complete all as specified and directed. 21 M&L for 18-20 mm thickGraniteof black colour (table rubbed and polished) inwin dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed. 22 M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floor/ pavings complete all as specified and directed. 23 M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. 24 M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed. 25 M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 26 M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) (nominal mix) as in slabs supported on wall ,landing, balconies ,shelves and like including bonding agent complete all as specified and directed. 27 M&L for form work to chajja, slab ,weather shade, troughs and similar items includingedges for rough finished surfaces of concrete flat complete all as specified and directed. 28 M&L for form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. 29 S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia complete all as specified and directed. 30 M&L for brick work with fly ash old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. 31 M&L for rendering 15 mm thick in CM 1:6 on brick masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed. 32 M&L for 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement with using water proofing liquid @ 0.15 Ltr per 50 Kg bag of cement complete all as specified and directed.Note Waterproofing liquid shal be measured and paid separately. 33 M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed. 34 Supply only integral water proofing liquid complete all as specified and directed. 35 S&F pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs ,hinges,lock strike plate ,etc complete all as specified and directed. 36 S&F 30 mm Plain, framed, panelled shutters (any number of panels) 2nd class HW with panels of timber flat on both sides (feather edged),or of veenered particle board medium density, wood particle board with comercial face veeners complete all as specified and directed. 37 S&F 30mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. 38 S&F 150 mm long Floor door stopper ofaluminium alloy body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed. 39 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing complete all as specified and directed. 40 S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C channel heaving aPanelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 41 S&F mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding FE-290 grade E-165 complete all as specified and directed. 42 S&F steel windows with pressed steel frame (size 95x45x1.25 mm) side hung shutter including box type hinges with steel handle ,and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauzed openable shutter without glazed bar (open in side) dovetailed or welded complete all as spd and directed and all as per drg no TD/088 dt 07 Jun 2002 Note:-(i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (ii) Rate for filling of PCC in frame deemed to be included in quoted rate (iii) MS grill shall be measured and paid seprately under relevant item of schedule 43 S&F steel ventilators fixed type ,with glazing bars complete welded including one shop coat of Red oxide Zinc chromate primer complete all as specified and directed. 44 S&F stainless steel wire mesh 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or stainless steel staples complete all as specified and directed 45 M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed. 46 S&F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 47 S&F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 48 S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. 49 S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed. 50 S&F 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller platewelded to mild steel frame.fixed in replacement complete all as specified and directed. 51 S&F 300 mm long aluminiumsliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed. 52 S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in positioncomplete all as specified and directed. 53 S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 54 S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. 55 S&F 20 mm dia steel water tubing, galvanized, medium grade concealed in all type wallwith all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 56 S&F in repairs brass chromium platedwall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. 57 S&F in repair fancy type 150 mm size square brass CP shower rose complete all as specified and directed. 58 S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turncomplete all as specified and directed. 59 S&F in repair fancy type chromium plated brass two way bib cocksuitable for 15mm bore pipe complete all as specified and directed. 60 S&F stainless steel of grade tubular towel ring including apair of CP brass bracket complete all as specified and directed. 61 S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. 62 S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. 63 S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipecomplete all as specified and directed. 64 S&F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP brackrt gaurd and railling 60 cm long complete all as specified and directed. 65 S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 66 S&F in repair 15 mm dia fancy type stop cock, chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed. 67 S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with Por S trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe)water closet squatt pattern complete including provn of lime concrete bedding complete all as specified and directed. 68 S&F in repair vitreous China coloured European type WC with P or S trap 75 mm dia white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. 69 S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. 70 S&F Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified and directed. 71 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. 72 S&F in repairPVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 100 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. 73 S&FPVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with neceassary fitting complete all as specified and directed. 74 S&FPVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with neceassary fittingcomplete all as specified and directed. 75 S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. 76 S&F PVC (SWR) 75mm bore bends any radiuscomplete all as specified and directed. 77 S&F PVC (SWR) 75 mm bore junction single (Single T) equal or unequal with access doorcomplete all as specified and directed. 78 S&F PVC (SWR) 110 mm bore junction single (Single T) equal or unequal with access doorcomplete all as specified and directed. 79 M&L 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. 80 S&F designed looking mirror of any size of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified 81 S&F in replacement 20 mm dia stainless steel 1.0 mm thick fancy typecurtain droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and directed. 82 S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins, vertical post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E-250) quality-A complete all as specified and directed. 83 S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete allas specified and directed. 84 M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 40cm girth in Stone concrete block or slab walls complete all as specified and as directed. 85 Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and construction fibre as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Water proofing liquid at interval of 8 hours cure for thesurfaces completeall as specified and directed. 86 S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, stucco embossed finish withfixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart gap to be with thermo col sheetincluding dismantled alsoall as specified and directed. 87 M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified and directed. 88 M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed. 89 M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferenttint and applying one coat of synthetic enamel paint complete all as specified and directed. 90 M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etcby skilled labour and applying two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over two coat of wall care putty of 1mm thickness complete all as specified and directed. Note:-Application to be done through authorised dealer. 91 M&L for applying of two coat OBD on newly plastered surface of wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coat of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machinecomplete all as specified and directed .Noe:- Application to be done through authorized applicator 92 M&L for preparation of newly plastered surface of walls and applying two coats of Dust Resistant and Anti Algal weather proof exterior emulsion paints over a one coat of wall care putty complete all as specified and directed 93 M&L for complete removal of existing treatment onsurfaces of walls including cleaning the surface throughly by using wire brushes and removing use materials from the surface and applying two coats of Dust Resistant and Anti Algal weather proof exterior emulsion paints over and including a one coat of wall care putty complete all as specified and directed. 94 M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. 95 M&L for complete removal of existing treatment on ceiling,etc including cleaning of any mortar drops ,fungus efflorescent salts etc and prepration of old plastered surface and applying two coat of white wash complete all as specified and directed. 96 Taking down carefully existing Aluminum/ copper point wiring (light/ Fan/ Ind Socket/ Ind Same socket/ Power Point) complete fittings etc. making good to disturbed surface of wall/Floor etc to match the existing surface/ finishes complete all as specified and directed. 97 M&L for concealed point wiring for one light/fan point controlled by one switch 5/6 Amp one way using approved colour coding as per IS with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI marked with valid CML No. including PVCconduitwith mild steel/pressed steel sunken box (with earth dolly) withmodular white cover plate with framefor mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dulycomplete all as specified and directed for the following :-Note:-(i) Circuit conductor from MCB DB to switch boards should not be less than 2.5sqmm (ii) Modular metal flush box or modular sunk pressed steel terminal box, modular white coverplate (uoter cover) with frame (inner) etc shall be measured and paid seperately. 98 All as per item No.97 but socket outlet 3 pin 5/6 amps same board complete all as specified and directed. 99 All as sper item No. 97 but for one socket outlet of 5/6 Amps on independent board complete all as specified and directed. 100 M&L for concealed point wiring using approved colour coding as per IS (Red , black and Green for single phase circuits),with multistranded copper conductor 2.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI marked with valid CML No. including PVCconduitwith mild steel/pressed steel sunken box (with earth dolly) withmodular white cover plate with framefor mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly complete all as specified and directed. 101 S&F Modular switches 1 way, 16 A, 1 module complete all as specified and directed. 102 S&F modular sockets6 A,-2/3 pin combined2 module complete all as specified and directed. 103 S&F modular sockets6 A/ 16 A,-2/3 pin combined2 module complete all as specified and directed. 104 S&F Modular switches 1 way, 6 A, 1 module complete all as specified and directed. 105 S&F Modular white cover plate with frame 3 module complete all as specified and directed. 106 S&F Modular white cover plate with frame 4 module complete all as specified and directed. 107 S&F Modular white cover plate with frame 6/8 module complete all as specified and directed. 108 S&F in replacement of lamp holder (batten/angle) PVC/polycorbonate type with back plate for batten / angle fittings complete all as specified and directed. 109 S&F ceilingrose surface bakelite, 65X50 mm, 2/3 terminals complete all as specified and directed. 110 S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 111 S&F in replacment of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and including 2 Nos MS clamp mad of MS flat iron of 50 x 6 mm size with nut, bolts washer etc with and including two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. 112 S&F in replacement LED street light luminaire of 35 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and including making all electric connection, complete all as specified and directed. 113 S&F in replacement sheet metal enclosure double shutter type for DBs 240 volts single pole and neutral 12 ways with 200 Amps rated bus bar complete all as specified and directed. 114 S&F in replacement SPN 6 to 32 AMP rating 240V, 10kA C curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 115 S&F in replacement SP 5 to 32 AMP rating 240V, 10kA C curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 116 S&F in replacement VTPN DB 6 way double door type including MCCB TP 63 Amps as incomer complete all as specified and directed. 117 Taking down sub main wiring of 4/6 sqmm complete all as specified and directed. 118 M&L for sub main wiringconcealed type with two single core cable PVC insulated cable with6.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size6.0Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize incl. making good the disturbed surfaces complete all as specified and directed.(Note : PVC conduit and its accessories including 2 runs of 6 Sqmm cable & 1 run of 6 sqmm earth continuity conductor cable unsheathed shall be measured and paid as single unit). 119 M&L for sub main wiringconcealed type with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize incl. making good the disturbed surfaces complete all as specified and directed.(Note : PVC conduit and its accessories including 2 runs of 4 Sqmm cable & 1 run of 4 sqmm earth continuity conductor cable unsheathed shall be measured and paid as single unit). 120 M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.50 mtr below normal GL and connected to galvanised earth lead wire 4mm dia by means of bolts, nuts check nuts and washers of galvanized iron or steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC 1:2:4 type B-1 (using 40 mm graded stone aggregates) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plateNo 5 of SSR Part-I and connecting toMCBDB’searth test point all as specified or indicated including testing on completion complete all as specified and directed. 121 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. 122 S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 123 Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. 124 Supply, laying, connecting and testing of 50mm bore dia ISI marked GI water tubing medium grade incluing S&F all fittings and fixed complete to walls complete or laid in floors complete all as specified and directed. 125 Supply, laying, connecting and testing of 25mm bore dia ISI marked GI water tubing medium grade incluing S&F all fittings and fixed complete to walls complete or laid in floors complete all as specified and directed. 126 S&F 25 mm bore dia gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No union for iron pipe heavy duty with ISI marked complete all as specified and directed. 127 S&F 50mm bore gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No union for iron pipe heavy duty with ISI marked complete all as specified and directed. 128 Returning, filling inand including spreading over, leveling, wateringand well rammming in layers n.exceeding 25 cm thick complete all as specified and directed. 129 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as specified and directed.
