|
| 1 | Dismantling of floor hearth or wall tilling including cement mortar bedding and removal out side MD land complete all as specified and directed. |
| 2 | M&L glazed ceramic coloured tiles 450 x 350 x 7mm thick invertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM 1:4, etc complete all as specified and directed. |
| 3 | M&L for Non- skid Ceramic coloured tiles 7 to 8mm thick (square/ Rectangular) area of each tiles notexceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete with screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 4 | M&L for machine cut kota stone slab flooring 20 - 25mm thick over cement mortar 15mm (1:6) screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including backing coat complete all as specified and directed. |
| 5 | S&F in repairs Vitreous china wash basin with pedestalflat back size 550X400 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 6 | S&F 15 mm dia pillar tapes Fency type of Chromoum Platedbrass withhalf turn type capstan/crutch heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed. |
| 7 | S&F 4.50 mm thick 600 x450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 8 | S&F in repair brass chromium platedtubular towel rail 20 mm dia \"D\" type 60 cm long including brackets/flanges complete all as specified and directed. |
| 9 | S&F in repair Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy withhalf turn type apstan/crutch heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 10 | S&F in repair Fancy type CP angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure withhalf turn type Capstan/crutch heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed. |
| 11 | S&F in repair Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type)screwed down high pressure with half turn type capstan/crutch heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed. |
| 12 | S&F PVC water connection 600 mm long to wash basin of 15mm dia including CP nuts and washers complete all as specified and directed. |
| 13 | S&F One piece vitreous china wash down coloured EWCwith Cistern size 65x39x71 CM including with trap front or back inlet including custom made seat coverof any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tubeand ABS wall hook complete all as specified and directed. |
| 14 | M&L Pre- painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L Pre- painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F for MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165(Brackets over 10 kg each to be measured under \"Structural Steel\")complete all as specified and as directed. |
| 17 | M&L for Providing & fixing false ceiling with semi perforated 12 mm thick micro tegular edged GRG at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistence of 99% , NRCO.50 to 0.75 as per IS 8225:1987 , Noncombustile as per BS 476 (part-4) - 1970 and light reflectance of 85% (minimum) to be laid in truehorizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross-T of size 15x32 mm of length 1200mm and secondary intermediatecross-Tof size 15x32 mm of length 600mm to form grid module of size 600x600 mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 gms per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threded hanger rodupto 1000mm length and L-shape level adjusterof size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on periphery wall/ partition withthe help of plastic rawl plugs at 450 mm center to center and40mm long dry wall wood screws. the work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 18 | Surface excavation n. exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 19 | M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base complete all as specified and directed. |
| 20 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 21 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surfaces soil to a distance not exc 50m and making good surface complete all as specified and directed. |
| 22 | M&L for PCC Type C2 1:3:6(40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 23 | Taking down decayed concrete upto double storey building from roof projection, chajjas, columns and beams etc, clearing vegetation growth if any, removing all loose material thenwashing down with water and making good the decayed portion with following tratment complete all as specified and directed. (a) Spraying cement slurry and aMaking good surface with PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate including necessary formworkor with cement mortar 1:3 as per reuirement.(b) Fixing GI wiremesh / chicken mesh of 0.90mm dia & 12mm mesh size over repaired portion inclduing necessary scaffolding where required.(c) Applying 15 mm thick cement mortar 1:3, surface finished even and smooth without using extra cementmixed with liwuid water proofing compoundas per manufacturer,s instructions. |
| 24 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for granite work (of any type) 20 mm thick (table rubbed and polished) in steps,risers, door jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including CM 1:4 10mm thick etc complete all as specified and directed by Engineer -in -Charge. |
| 26 | Rounding/ moulding to edges of stone slabs one/ all edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 27 | M&L for vitrified durastone parking tiles 10 mm thickarea of each tiles n exc 0.36 sqm with grey cement and pigment, set, jointed and pointed in white or coloured cement to match the shade of tiles over and including set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 28 | S&F of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on WALLS / CEILING complete all as specified. supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and directed. |
| 29 | All as per item No 28 here in before but 20mm dia pipe. |
| 30 | S&F rotational moulded water storage tank 250ltr capacity double layer (cylindrical vertical with closed top) hoisted with PVC cover thread with suitable lock arrangments and fixed in position complete all as specified and directed. |
| 31 | S&F 15mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 32 | S&F 75mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed. |
| 33 | S&F 75mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed. |
| 34 | S&F 75mm borePVC (SWR) bends any radius with access door complete all as specified and directed. |
| 35 | S&F 75mm borePVC (SWR) junction single, (single T) equal or unequal any radius with acess door complete all as specified and directed. |
| 36 | S&F 75 mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 37 | S&F 110mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed. |
| 38 | S&F 110mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed. |
| 39 | S&F 110mm borePVC (SWR) bends any radius with access door complete all as specified and directed. |
| 40 | S&F 110mm borePVC (SWR) junction single, (single T) equal or unequal any radius with acess door complete all as specified and directed. |
| 41 | S&F 110mm borePVC (SWR) junction double, (double T) equal or unequal any radius with access door complete all as specified and directed. |
| 42 | S&F 110mm borePVC (SWR) cowl any radius complete all as specified and directed. |
| 43 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 44 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 45 | M&L for Half brick work sub class B bricks, straight or curved on plan to any radius built in half brick thick wallsCM 1:4 complete all as specified and directed. |
| 46 | S&F Chromium plated peg set of four inclluding fixing to wall with ss screws all as per sample kept in GE’s office, complete all as specified and directed. |
| 47 | S&F 25 mm dia Stainless steel drapery rod with and including two nos of bracket/holders suitable for drapery 25 mm dia rods of one window / door openings upto 1.8 Mtr length etc of Allishan-Ivory pearl interior series complete all as specified and as directed. |
| 48 | S&F 18 mm thick factory made PVC solid ply for cupboard shutters,partition, shelves, drawers, and similar work etc of required colour and size consisting of pannels. The visible edge of celuka ply to be lipped with 18 mm wide and 1 mm thick PVC cladding sheet of required colour and fixed with adhesive etc complete as per manufacturer\"s instruction complete all as specified and directed. |
| 49 | S&F stainless steel self closing hinges 75 mm size for PVC cupboard shutter complete all as specified and as directed. |
| 50 | S&F stainless steel handles decorative type 125 mm size complete all as specified and directed. |
| 51 | M&L Aluminium partition made with aluminium anodised section 62.30 x 44.45 x 1.50 mm of fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5mm thick glass (black/tinted/plain) and all necessary fittings complete as in partition complete all as specified and directed. |
| 52 | M&L for Fibrette Tile made of \"Wood fiber Cement Composite\" 1mm width wood fiber 15mm thick size 595x595/595X1195 mm having excellent noise absorption of 1 NRC as per ISO: 354, Density 400 Kg/ m3, meets Fire Ratings as per BS 476 Part 5, 6 and 7 class 1 and P, water resistant and thermal insulated. Installed on T24 grid system of 0.6mm thick Main \"T\" length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross \"T\" of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and directed. |
| 53 | Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed. |
| 54 | Taking down shutters of any description exc 2 sqm each complete all as specified and directed. |
| 55 | S&F for framed work as in door frames or gates chowkats of angle or other section withbraces, etc., complete, drilled or welded for ms hinges for fixing of gate or doors other covering andalso fastening and fixing complete all as specified and directed. |
| 56 | S&F for Welded steel wire fabric mesh of size 25 to 40 mm not exceeding 4 Kg/Sqm to wood or steel members complete all as specified and directed. |
| 57 | M&L for30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated complete all as specified and directed. |
| 58 | S&F for solidPVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed. |
| 59 | S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat molded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2020 and as directed by Engineer-in-Charge |
| 60 | S&F 100mm Butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 61 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed |
| 62 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed. |
| 63 | S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F 150mm overall length of cover plate of floor door stopper of aluminium body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 65 | M&L aluminium powder coated (powder coated of requried colour) two track sliding windows frame top & sides of size 62 x 31.75 x 1.50 mm, bottom size 62 x 31.75 x 1.50 mm and shutter top & bottom of size 40 x 18 x 1.50 mm and sides (handle) of size 40 x 18 x 1.50 mm and lock side shutter frame of size 40 x 18 x 1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete and fixing 4 mm thick glass with necessary rubber beading gasket etc including fixing of stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture covering whole area of opening and fixed with stainless steel wire staples to aluminium frame complete all as specified and as directed. |
| 66 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed. |
| 67 | M&L for brick work with fly ash straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 68 | M&L for rendering 10 mm thick CM 1:4 setting coat and backing coat of 5 mm thick CM 1:4 on concrete or brick masonry surface finished even and smooth (without using extra cement) including scaffolding complete all as specified and directed |
| 69 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 70 | M&L for rendering 15 mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed. |
| 71 | M&L for preparation ofnew plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a 3mm of wall putty complete all as specified and directed by Eng-in-charge. |
| 72 | M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies/chajjas of building including removal of debris out side MD land complete all as specified and directed. |
| 73 | M&L forrendering10mm thick in CM 1:4,mixed with WPC @200 ml per bag of cementon fair faces of concrete surfaces without using extra cementas in roof complete all as specified and directed.Note:- WPC shall be measured & paid separately. |
| 74 | Supply only Liquid waterproofing compound. |
| 75 | M&L for preparing clean and dried plastered surface and applying a coat of oil basedbitumen primer conforming to IS 3384-1986 @ 0.30 litrs/sqmand then laying APP polymer modified membrane 3.5mm thick with non woven polyster reinforced membrane (min 3.50 kg/sqm) having thermal insulation with white mineral gravel finish on upper side of membrane and laid by torch application method to the entire surface complete all as specified and directed by Engineer in Charge. |
| 76 | M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation, priming with zinc chromateand two coats of synthetic enamel paint complete all as specified and directed. |
| 77 | M&L for applying 2 coat of weather proof exterior emulsion paint (apex) in camouflage pattern by dilution of water (as per manufacturer direction ) a gap of 24 hrs should be given between two coats, over a coat of primer on plastered /unplastered surface should be allowed to cure completely such as surafce applying one coat of exterior wall primer by thining a liter of primer with one liter of water allow the primer coat for four hours including cleaning and ensure that the surfaces to be painted is free from any loose paint and filling the surface imperfection such as holes , dirt, fine cracks are to be filled with cement and fine sand (in ratio 1:3) complete all as specified and directed by Engr-in-charge. |
| 78 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and as in purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 79 | M&L for Pre-cast cement concrete block masonry with solid blocks, type C1 1:3:6 using 20 mm graded aggregate exc. 10 cm in width and setting in cement mortar 1:6 , complete all as specified and directed. |
| 80 | Excavation in trenches n. exc 1.50 meter wide and n. exc. 1.50 meter depth for foundations etc shafts, well cesspits, manholes, pier holes etc n. exc. 10.00 Sqm on plan and getting out in soft/ loose soil complete all as specified and as directed. |
| 81 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement in external surface of wall complete all as specified and as directed. |
| 82 | M&L for precast cement concrete 1:2:4 (using 12.5 mm graded aggregate) as in coping complete all as specified and as directed. |
| 83 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed. |
| 84 | S&F framed steel work in tubular section for purlin, rafter, posts and similar items including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS : 1161-1979 grade St.-240 complete all as specified and as directed. |
| 85 | M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 86 | S&F aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50mm thick, middle rail of section 85mm x 44.5mm x 1.50mm thick and top rail of section 80.4mm x 44.5mm x 1.50mm thick and styles of section 80.4mm x 44.5mm x 1.50mm thick with 5.0mm thick glass (plain/ tinted/ with laminated film) or 6 mm thick coloured ACP sheet fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 1.50mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and as directed. |
| 87 | M&L for rendering 10mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cementin internal surfaces of wall complete all as specified and as directed. |
| 88 | M&L for preparation ofnew plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Eng-in-charge. |
| 89 | M&L for cement concrete (1:2:4) type B2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 90 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410W (gde-250) quality-A complete all as specified and as directed. |
| 91 | S&F Mild steel rag or lewis bolts, dia of necks is 12mm screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long complete all as specified and as directed. |
| 92 | M&L for hardcore of gauge n. exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-Charge. |
| 93 | M&L for 100 mm thick cement concrete 1:3:6, type C-2 (using 40mm graded aggregate) as in sub-base of flooring / hard standing complete all as specified and as directed. |
| 94 | M&L for 100 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded aggregate) as in sub-base of flooring / hard standing complete all as specified and as directed. |
| 95 | M & L for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 25 mm dia fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes modular type of required sizes and thickness (factory made) sunk in wall where as required and accessories complete suitable for the following :- One light/fan/bell point controlled by one onway switch |
| 96 | All as per item No 95 here in before but One socket outlet 05 Amps on the same board |
| 97 | All as per item No 95 here in before but One socket outlet 05 Amps on independent board |
| 98 | All as per item No 95 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed. |
| 99 | S&FSwitch modular, single pole one way 5 Amps 240 volt capacity complete all as specified and as directed. |
| 100 | S&F 3 pin 5 Amps modular Socket outlet, flush type complete all as specified and as directed. |
| 101 | Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and as directed. |
| 102 | S& F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal as ordered complete all as specified and as directed. |
| 103 | Supply and fixing in repair LED light 35 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 104 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and as directed. |
| 105 | S&F miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP 240V, 10 KA \"C\" curve, in theDB Complete with connection testing and commissioning complete all as specified and as directed. |
| 106 | All as per item No 105 here in before but SPN 40 AMP capacity |
| 107 | S&F 6 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed. |
| 108 | S&F4 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed. |
| 109 | M&L for sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS,flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit of size andone run of same sizecopper cable as earth continuity conductor in green color complete all as specified and directed. Note :- Two runs of single core cable with one run of earth continuity cable including PVC casing-n-capping and its accessories will be measured and paid as one unit. |
| 110 | S & Fin replacement of LED batten fitting alongwith removable LED Tube 20W, 230 Volt, 6000K, wall /ceiling mounted ,LED battenfixed by means of bolts,ABS rotor suitable for single side connections. LED rod having glass material complete haivng lumen efficacy minimum 100 lm/w,CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internallly prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 111 | Supply and fixing in replacementLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 112 | Supply and fixing of LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type complete all as specified and directed. |
