Tender For Renovation Of Doaa Canteen Near Jee Gate Building; 1 CEMENT CONCRETE (CAST IN SITU) 2 Makingplinthprotection 50mmthickofcementconcrete 1:3:6 (1cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 3 REINFORCED CEMENT CONCRETE 4 Providing,hoisting and fixing above plinth level up to floor five level precastreinforcedcementconcreteworkinstringcourses,bands, copings,bedplates,anchor blocks,plain window sills and thelike, including the cost of required centering, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 5 Steelreinforcement forR.C.C.workincludingstraightening,cutting, bending, placing in position and binding all complete above plinth level. 6 Thermo-Mechanically Treatedbars of gradeFe-500D or more. 7 MASONRY WORK 8 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 9 Cement mortar 1:6(1 cement : 6 coarse sand) 10 CLADDING WORK 11 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. 12 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 13 WOOD AND P. V. C. WORK 14 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 15 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading 16 Providing and fixing ISI marked flush door shutters conforming to IS : 2202(PartI)non-decorative type,core of blockboardconstruction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 17 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 18 Providingand fixingaluminiumdie cast body tubular typeuniversal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 19 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 20 300x16 mm 21 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 22 250x10 mm 23 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 24 125 mm 25 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 26 Twin rubber stopper 27 STEEL WORK 28 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 29 Ingratings,frames,guardbar,ladder,railings,brackets, gates and similar works 30 FLOORING 31 Cement concrete flooring 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 32 40 mm thick with 20 mm nominal size stone aggregate 33 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 34 25 mm thick 35 Providing andlayingCeramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 36 FINISHING 37 12 mm cement plaster of mix: 38 1:6 (1 cement: 6 coarse sand) 39 15 mm cement plaster on rough side of single or half brick wall of mix: 40 1:6(1 cement: 6 coarse sand) 41 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 42 Flush / Ruled/ Struck or weathered pointing 43 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: 44 New work(twoormorecoats)over andincludingwater thinnable priming coat with cement primer having VOC content less than 50 gram/litre 45 Finishing walls with Acrylic Smooth exterior paint of required shade: 46 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 47 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 48 Two or more coats on new work 49 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 50 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 51 REPAIRS TO BUILDING 52 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 53 With cement mortar 1:4 (1cement: 4 coarse sand) 54 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 55 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 56 Dismantling and Demolishing 57 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 58 For thickness of tiles 10 mm to 25 mm 59 SANITARY INSTALLATIONS 60 Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : 61 Size 600x450x200 mm 62 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 63 Flexible pipe 64 32 mm dia 65 Providing and fixing 100 mm sand cast Iron grating for gully trap. 66 Providing and fixing soil, waste and vent pipes : 67 100 mm dia 68 Sand cast iron S&S pipe as per IS: 1729 69 Providing and fixing plain bend of required degree. 70 100 mm dia 71 Sand cast iron S&S as per IS - 1729 72 Providing and fixing single equal plain junction of required degree : 73 100x100x100 mm 74 Sand cast iron S&S as per IS - 1729 75 DRAINAGE 76 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 77 100 mm diameter S.W. pipe 78 ALUMINIUM WORK 79 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 80 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 81 WATER PROOFING 82 Providingand applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer- in-Charge. 83 Minor Civil Maintance Works 84 Cleaning of Dirty Tiles in Centeen Kitchen Area using Chemical and Soap etc Complete.
