Tender For Maintenance Work At Officers Transit Hostel In Hapur District - Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. including all cost of materials,labour cess, labour T&P etc. required for proper completion of work.but Excluding GST.DSR 2023.13.91 2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. including all cost of materials,labour cess, labour T&P etc. required for proper completion of work.but Excluding GST.DSR 2023.15.56 3 12 mm thick plaster with cement & fine sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not be less than 1 cmincluding cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.including all cost of materials,labour cess, labour T&P etc. required for proper completion of work.but Excluding GST. DSR 2023.13.1.1 4 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. with approved quality material of Berger/J.K./ Birla or similar. including all cost of materials,labour cess, labour T&P etc. required for proper completion of work.but Excluding GST. DSR 2023.13.80 5 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers New work (two or more coats) over and including water thinnable priming coat with cement primer of approved brand and& manufacture such as Berger, Shalimar, J&N including cleaning, brushing the surface free from mortar, drops including all cost of materials,labour cess, labour T&P etc. required for proper completion of work.but Excluding GST.DSR 2023.13.41.1 6 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including all cost of materials,labour cess, labour T&P etc. required for proper completion of work.but Excluding GST. DSR 2023.13.48.1 7 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Twoor more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture of approved brand and manufacture of approved superior quality readymix paintincluding supply ofall material labour, labour cess T&P etc. required for proper completion of work but excluding GST. paint to be used should confirem the ISI No. 103-1950 . DSR 2023.13.48.3 8 Dismantling tile work For thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead. including supply of all materials,labour, Tools & plant etc. required for proper completion of the work. bur excluding GST. DSR 2023.15.23.1 9 Providing and laying Size of Tile 600x600 mm vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete.including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023.11.41.2 10 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth .including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023.6.2.1 11 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023.8.31 12 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023.4.1.3 13 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 40x40x6 mm, joints mitred and welded by angle iron 40x40x6 mm or 40x 6 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023. 10.31 14 Providing and fixing pressed steel door frames confirming toIS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel andgle of section 50x 25 mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards lock strick plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by engineer in charge.Profile E including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023.10.14.3.1 15 Providing and fixing ISI marked 35 mm thick flush door shutter conforming to IS:2202 (Part I) non-decorative type including ISI marked Stainless Steel butt hinges with necessary screws, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :And also including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023. 9.21.1 16 Providing and fixing 25 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.as per direction of Engineer in Chargeand including supply of all materials, labour and T&P etc.but excluding G.S.T.required for proper completion of work.DSR.18.9.3 17 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. and including supply of all materials, labour and T&P etc.but excluding G.S.T.required for proper completion of work..DSR 2021 18.48 18 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball and including supply of all materials, labour and T&P etc.but excluding G.S.T.required for proper completion of work.20 mm nominal bore, 120 mm long, weighing not less than 198 gms. DSR 2023 18.62.2 19 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required and including supply of all materials, labour and T&P etc.but excluding G.S.T.required for proper completion of work. W.C. pan with ISI marked white solid plastic seat and lid.DSR 2023 17.3.1 20 Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapswith C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require and including supply of all materials, labour and T&P etc.but excluding G.S.T.required for proper completion of work. DSR 2021 17.7.1 21 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings and including supply of all materials, labour and T&P etc.but excluding G.S.T.required for proper completion of work.DSR 2021. 17.8 22 Providing and fixing 15 mm nominal bore C.P.brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. brass bib cock of approved quality conforming to IS:8931 and including supply of all materials, labour and T&P etc.but excluding G.S.T.required for proper completion of work. DSR 2023. 18.50.1 23 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023.19.18.1 24 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST. DSR 2023.17.16 A 25 Providing and fixing on wall face110 mm diameterunplasticised Rigid PVCconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.and including supply of all materials, labour and T&P etc.but excluding G.S.T.required for proper completion of work.DSR 2023 12.41.2 26 Supply and fixing of 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :mortar and polished by hand or machine and finally finished with french manson polish or otherapproved polish including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST.DSR 2023.11.26.1 27 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoothincluding supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST.DSR 2023.4.17 28 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals inerwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete.(Cost of posts,struts, earth work and concrete work to be paid for separately) Payment to be made per metre cost of total length of barbed wire used. including supply of all materials,labour, Tools & plant etc. required for proper completion of the work.but excluding GST.DSR 2023.16.18.1
