Tender For Cctv Cameras With Leds Installed In Pubic Places , Sitc Of 55 4K Resolution Or Better Led Tv With Remote Control And Wall Mount Unit / Floor Stand Complete With Making Connections Etc. As Required. , Supply, Drawing And Testing Of 4 Pair, 23 Awg Solid Bare Copper Wire Insulated With Hdpe, Category 6A/Class Ea, U/Ftp (Unscreened/Foiled Twisted Pair), 100 Ohm Impedance, Indoor Cable As Per Latest Ammendments Of Ansi/Tia/Eia-568 C.2 & Iso/Iec 11801 2Nd Ed, The Copper Conductors Should Be Balanced Twisted In Pairs, Unscreened And Aluminum Foil Sheilding Of Individual Pairs Protected By A Low Smoke Zero Halogen (Lszh)(Iec 60332-1) Jacket. Certified Performance In A 4-Connector Configuration Upto 100 Mtrs Channel Requirements & Transmission Frequencies Up To 500 Mhz. Should Meet Ieee 802.3Af & Ieee 802.3At For Poe Applications. Cable Should Support Ethernet 10Gbase-T According To The Standards. In Existing Ms/Pvc Conduits/ Casing Capping Including Making Connections To Information Outlets And Patch Panels With Jack & Ferruling At Both Ends For Identification With Necessary Tools For Punching, Stripping, Crimping And Testing Etc As Required.All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/Work , Refer Annexure A Attached With This Bsr . , Supply And Fixing Of Lt Porcelain Shackle Insulator As Per Is:1443 1979 And As Per Discoms Standard Specifications, Suitable For Working Voltage 1100 Volts Including All Accessories Like Gi Hardware Fittings Confirming To Is:7935/1975 (Latest Amended) Nut, Bolt Etc. As Required. All As Per Pre Approved By Engineer Incharge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 100Mm X 110Mm , Supply And Erection Of Galvanized Iron Pole With Galvanizing Done In Single Dipping (Average Coating Thickness Minimum 65 Microns) Continuously Tapered Poles Having Octagonal / Circular Crosssections Designed To Withstand The Maximum Wind Speed As Per Is 875, The Pole Shaft Shall Be Made From Sheet Steel (Ht Steel Conforming To Grade S355jo) And Confirming To Bsen 10025 And Shall Be Continuously Tapered With Single Longitudinal Welding. There Shall Not Be Any Circumferential Welding. The Welding Of Pole Shaft Shall Be Done By Submerged Arc Welding (Saw) Process. Pole Shafts Shall Be Provided With The Rigid Flange Plate Of Suitable Thickness (Fe 410 Conforming To Is 226 / Is 2062) With Provision For Fixing 4 No. Foundation Bolts, This Base Plate Shall Be Fillet Welded To The Pole Shaft At Two Locations I.E. From Inside And Outside.The Octagonal Poles Shall Have Lockable Door Of Approximate 500 Mm Length At The Elevation Of 500 Mm From The Base Plate With Bakelite Sheet Having 6A Sp Mcb And 16 Sqmm Stud Type Connector ( 4 Nos) Inside The Pole At Door Opening For Cable Connection Of Following Length And Dimension As Per Table P-01 With Base Plate And Foundation Bolt On The Existing Cement Concrete Foundation.All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 7 Mtr. , Supply And Fixing Of Pole Oem Fabricated Hot Dipped Galvanised M.S. Overhang (48.3 X 3.25 Mm) With Cap (400 X 88.9 / 114.3 X 3.25 Mm) Over The Existing Poles. All As Per Pre Approved By Engineer Incharge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . Single Arm Overhang , Providing And Laying Rcc Foundation For Octagonal / Conical Street Light Poles, High Mast Poles As Per Drawing Attach At Table P-4 With Following Procedure & All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/Work , Refer Annexure A Attached With This Bsr . Pole Foundation For Octagonal Pole From 7 Mtr. To 9 Mtr. , Providing, Installation, Testing And Commissioning Of Online Ups System, Single Phase 230 V, 50 Hz With 2 Hour Backup Smf Battery Bank As Per Specification 1 Kva , Sitc Of Battery Bank Comprising Smf/Vrla Batteries, Interconnection Wiring Etc. As Required Complete In All Respect. 12 V 42 Ah , Supply & Installation Of Ip-20 & Ik-08 , Ul Listed Wall Mounted Double Section Communication Enclosure (Rack) Made From Powder Coated (60 To 80 Micron) Crca Sheet, Front Sturdy Sheet Steel Frame Folded From One Piece And Welded With Minimum 5Mm Toughened Glass Door,Vertical Mounting Rail 1.6 Mm With Umarking, With All Round Protective Channel On The Door Aperture, Lock Integrated On Front Door, Top And Bottom Cover With Cable Entry Provision With Gland Plates, Integrated Side Walls, 2 Pair Of 19 Angles With Wall Mounting Provision On Wall. Accessories Like: 1 No Of 19 1U Horizontal Cable Manager, 1 No Of 90 Cfm 230V Ac Fan With 1 Mts Long Cable, Mounting Hardware , 1 No Of 19 1U, Mountable Socket Strips With 5 Nos Of 5A Universal Sockets With 2 Mts Long Power Chord For Supplying Power To Switches, Fans Etc Along With Earth Continuity Kit, Indicator, Moulded Power Supply Cable. Fixing On Wall With Suitable Anchor Fastner Etc As Required.All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 6 U Rack With Width 600 Mm & Depth 400 Mm + 100 Mm , Supply, Drawing And Testing, Of Stranded Multi Mode (50/125 ?M) Glass Optic Fiber Cable, As Per Latest Ammendments Of Tia/Eia 568/Iso/Iec 11801:2011/ Iec 60794-1-2 E1, E3,E11, F1/ En 50173-1/ En 187 000/ Iec 60974-2, 2-20, 2-21/ Itu G.652D, Construction Of Lszh Outer Sheath Cable, Cable Should Be Used For Lan And Wan Back Bones, . With Its Lszh Sheathing These Cables Should Be Ideal For Indoor/Outdoor Installations In Existing Ms/Pvc/Hdpe Conduits/ Slotted Channels With Ferruling At Both Ends For Identification Complete In All Respect. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/Work , Refer Annexure A Attached With This Bsr . 12 Fiber , Supply, Installation, & Testing Of Indoor Duplex Singlemode Patch Cord (9/125 ?M (Os1/Os2) Made Of Glass Fiber Optic With Lszh Jacket, F8 2.0X4.1 Mm, Yellow, Singlemode G652.D (9/125 ?M (Os1, Os2) Mounted On Both Sides With St/E-2000/Sc/Lc/Mt-Rj/Pc Type Duplex Connectors In Acc. With Iec 61754-20. Zirconia (Ceramic) Ferrule With A Pc Polished Endface Geometry, Connectors Should Be Tuned In Accordance With Iec 61755-3-1 And Qualified In Acc. With Iec 61753-1 For Category U (Uncontrolled Environment, Duplex Clip And White Plastic Dust Cover, Should Comply To Delta Il < 0.2 Db After 500 Mating Cycles, There Should Be An Optional Visual Coding, Mechanical Coding And Lock Protection On The Patch Cords Which Can Be Added On Later Stage. Patch Cordss Performance Should Be Acc. To Iec 61753-1 (Table A.12) As Per Latest Ammendments Of Tia/Eia 569B.3, As Per Requirements.All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . Single Mode Patch Cord 5 Mtr. , 16 Port Unmanaged Network Poe Switch: 16 Port Poe Switch With Poe Standard Of Ieee 802.3Af , Ieee 802.3At, Poe Port, Uplink Ports , Supply, Installation, Testing & Commissioning Of 5 Mp Varifocal Bullet Network Camera Complete With All Required Specification And Supporting Accessories. , 32Ch Network Video Recorder- Connect Up To 32 Ip Cameras, Dual Os, Up To 8 Megapixels Resolution, Hdmi And Vga Independent Outputs Provided, Hdmi Video Output At Up To 4K (3840 × 2160) Resolution , Vga Upto 1920 × 1080, Support H.265, Mjpeg, Incoming Bandwidth 256 Mbps, 4 Sata Hard Disks, Anr Technology, 4 Sata Interfaces For 4 Hdds And Capacity Of Each Hdd Upto 6Tb, 3× Usb At Least 1 × Usb With 3.0, Alarm I/O 16/4, Rs-485, Rs-232, 2 Rj-45 10 /100/1000 Mbps Self-Adaptive Ethernet Interface, Multiple Network Monitoring: Web Viewer, Ce, Fcc, Bis Certified. , Installation Of Ofc Network Connectivity (One Time Coast) Per Node
