Tender For Periodical Services And Welcome Maintenance To Md Otm Accommodation Bldg And Walls In L & M Area Nb (K); 1 Taking down cement plaster from Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engr-in-Charge. 2 M&L for rendering 15mm thick on brick or concrete wall surfaces with cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. 3 M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces ofceiling surfaces finished even and smooth complete all as specified and as directed by Engr-in-Charge. 4 M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. 5 Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. 6 M&L for Complete removal of existing treatment of external wallusing water jet, mechanical grinders including rubbing, washing down with water, etc. and applying two coats of weather proof (antifungal) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge.Note:- Application of paint and primershall be as per manufacturers instruction. The quoted rate shall include cost ofscaffolding as required. 7 Material & Labour for preparation of new external plasteredsurfaces of wall and applying two coats of weather proof (antifungal) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge.Note:- Application of paint and primershall be as per manufacturers instruction. The quoted rate shall include cost ofscaffolding as required. 8 M&L for preparation of newly plastered surfaces of ceiling andapplying three coat of white wash complete all as specified and as directed by Engr-in-Charge. 9 M&L for preparation of new wall surfaces andapplying three coat of white wash complete all as specified and as directed by Engr-in-Charge. 10 M&L for preparation of new plastered surfaces of wall (plastered or unplastered) including cornices and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engr-in-Charge. 11 M&L for preparation of old decorate surfaces of walls including cornices (plastered or unplastered) and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge. 12 M&L for preparation of old decorate surfaces of ceilingand applying one coat of white wash complete all as specified and as directed by Engr-in-Charge. 13 M&L forpreparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of colour wash complete all as specified and as directed by Engr-in-Charge. 14 M&L for preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of distemper oil emulsion complete all as specified and as directed by Engr-in-Charge. 15 Complete removal of old decorated surfaces of walls (plastered or unplastered) including cornices preparation and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engr-in-Charge. 16 M&L for applying 1.5mm-2mm thick wall care putty on old / new plaster surface of wall complete all as specified and as directed by Engr-in-Charge. 17 M&L preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of cement base paint complete all as specified and as directed by Engr-in-Charge. 18 M&L for preparation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. 19 M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. 20 M/L for preparation of old decorated surfaces of wood and applying one coat of French polish complete all as specified and as directed by Engr-in-Charge. 21 M&L for writing letters of figures (BLOCK, ROMAN, ITALIAN OR INDIAN) n exc 30cm high all as specified and directed by Engr in Charge. Note : Writing shall be done with thick paint so that they stand out boldly. 22 M&L for preparation of old external surfaces of wall and applying one coat of Premium acrylic emulsion paint,Alkali & fungal resistance, dirt resistance exterior paint of required shade complete all as specified and as directed by Engr-in-Charge. 23 M&L old painted plastered surfaces of any description over 10cm width or girth and applying one coat of plastic emulsion paint complete all as specified and as directed by Engr-in-Charge. 24 M&L for preparation ofolddecorated surfaces of wood or wood based material exc 10cm width or girth and applying one coat of synthetic varnish as finishing coat complete all as specified and as directed by Engr-in-Charge. 25 Repairs toshutters without taking down of any description not exceeding 1.0 Sqm including re-securing or easing and adjustingin same opening complete all as specified and as directed by Engr-in-Charge. 26 Repairs to shutters without taking down of any description exceeding 1.0 Sqm and not exceeding 2 Sqm includingre-securing or easing and adjustingin same opening complete all as specified and as directed by Engr-in-Charge. 27 S&F in repair mild steel 375mm, ordinary rat tail rod pattern springs including roller and roller plate complete 28 Supply and fix in repair aluminium anodised barrel tower bolt extruded section of 200 mm long. 29 Supply and fix in repair aluminium anodised barrel tower bolt extruded section of 150 mm long. 30 Supply and fix in repair aluminium anodised barrel tower bolt extruded section of 100 mm long. 31 Supply and fix in repair 300mm long aluminium alloyanodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 32 Supply and fix in repair butt hinges medium weight cold rolled mild steel powder coated with mild steel hinges pin for 100mm size. 33 Supply and fix in repair butt hinges medium weight cold rolled mild steel powder coated with mild steel hinges pin for 75mm size. 34 Supply and fix in repair extruded aluminium alloy handles fabricated type anodised 150 mm size. 35 Supply and fix in repair extruded aluminium alloy handles fabricated type anodised 125 mm size. 36 Supply and fix in repair tubular towel rail 20mm dia brass chromium plated with brackets fixed in repairs 60cm long complete all as specified.Make:- Parryware Cart part No.T6901A1 or equivalent appprove makes 37 Supply and fix in repair door stopper ofaluminium alloy body and tongue anodised with hard drawn steel spring fixed on floor, 140mm overall length of cover plates. 38 Supply and fix in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples 39 Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fitted with beads not exceeding 1.50 Sqm. 40 S&F Sheet glass ordinary quality 3.00 mm thick and glazing with oil putty / beads in squaresnot exceeding 0.5 Sqm in each pane. 41 Supply and fix 3.00mm thickfrosted glass pin head type and glazing with oil putty / beads in squaresnot exceeding 0.5 Sqm in each pane 42 Taking down chowkhat or frames not exceeding 1.5 sqm each including shuttercomplete all as specified 43 Taking down chowkhat or framesexceeding 1.5 sqmbut not exceeding 4 sqm each including shuttercomplete all as specified 44 S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 45 S&F in repairs Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating ofgrade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handlesand fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. 46 S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified 47 Supply and fix in repair powder coated aluminium curtain rail 20 mm dia decorative type complete all as specified and as directed by Engr-in-Charge. 48 Supply and fix in repair in repair powder coated aluminium decorative brackets and finials for curtain rail 20mm dia complete all as specified and as directed 49 S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed. 50 Repairs to concealed flushing cistern of any make or brand complete all as specified and as directed by Engr-in-charge. 51 Dismantling of floor hearth or wall tilling tiles including CM bedding (but not backing) and disposing the rubbish off the premises as directed 52 Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over andincluding provision of CM screed 15 mm thick in CM (1:6) all as specified and directed. 53 Material and labour for glazed ceramic tiles of size 300 x 200 mm x 7 mm thick onvertical surfaces as in dados/skirting over andincluding provision of backing coat 10 mm thick in CM (1:4)all as specified and directed. 54 Material and labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over andincluding provision of backing coat 10 mm thick in CM (1:4)all as specified and directed. 55 M&L for light shade Vitrifiedtiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over andincluding provision of CM screed 15 mm thick in CM (1:6) all as specified and directed. 56 All as per item no. 55 above butin vertical surfaceover andincluding provision of backing coat 10 mm thick in CM (1:4)all as specified and directed. 57 M&L 18 to 20 mm thick machine cut polished granite 1st quality black stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed. (Sample of granite shall be be approved by GE before execution of work) 58 Supply and fix in repair in repairs vitreous China wash down water closet(pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe. 59 Supply and fix in repair in repairs vitreous China wash down water closet single piece (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe. Make:- Cera Campbell Cat. No.S1013156 or equivalent make of other manufacturers from the list 60 Supply and fix in repair plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. 61 Supply and fix in repair plastic water closet seat for single piece closet, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make : Parryware EWC Seat cover E 8305 Ultra Solid white or equivalent make of Cera/Hindware 62 Supply and fix in repair in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete 63 M&L for repair only of flushing cistern, low level including replacement of washer, handle, syphon etc complete all as specified and as directed. 64 M&L in replacement of Concealed flushing cistern internal parts like inlet valve, float valve, syphon set, washer of any make or brand incl removal of old flushing cisterncomplete all as specified and as directed by Engr-in-charge.Note: Spare parts required to be changed shall be of the existing make of the Concealed flushing cistern 65 Supply and fix in repair in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain andplug and porcelain stopper but including cast iron brackets. 66 M&L for repair only fitting of wash hand basin by replacement of brackets, etc complete all as specified. 67 M&L for vitreous China wash hand basinwith pedestal Complete all as specified and as directed.Make:-Wash basin Parryware Cart part No. Azure C8886 (565x425x175mm) and Wash basin Pedestal-Long Parryware Cart part No. Azure C888 (175x175x725mm) or equivalent make of Cera/Hindware 68 Supply and fix in repair in repairs vitreous China wash hand basin counter top of size 565 x 465 x 185 mm white, with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain andplug and porcelain stopper but including cast iron brackets. Make:-Counter top Basins Parryware Cart part No.Leeds N white C0483 (565x465x185mm)or equivalent make of Hindware/Cera 69 S&F in repair pillar taps, brass, with capstan heads, fancytype chromium plated, screwed down high pressure with or without lettered Hot or cold with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make:- Jaguar KUP-35001PM or equivalent make from the approved list of makes 70 S&F in repair looking mirror of size 600x450mm selected quality glass 4.8mm thick fixed with CP Bracket complete all as specified and directed. 71 Supply and fix in repair towel Rack 600mm long with Lower Hangers, Stainless Steel with brackets fixed in repairs 60cm long complete all as specified. Make:- Jaguar AKP-35781PFS or equivalent make from the approved list of makes 72 S&F in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx), with one single shutter and built in mirror in front of shuttercomplete all as specified and as directed by Engr -in-charge. 73 S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing size 60cm long with brass bracketcomplete all as specified and as directed 74 S&F in repairs, corner glass shelf of 5mm thick plain sheet glass andwith brass, chromium plated bracket complete all as specified and as directed by Engr -in-charge.Make:- Jaguar ACN-1173 Corner Glass Shelf (with Bracket) or equivalent make from the approved list of makes 75 S&F in repair SS toilet paper holder including fixing screws complete all as specified. Make:- Jaguar Cat No.ACN-1151N Toilet Roll Holder or equivalent make from the approved list of makes 76 S&F in repair Towel Ring Round with Round Flange complete all as specified.Make:- Jaguar Cart part No. ACN-1121BN/ or equivalent make from the approved list of makes 77 S&F in repair SS grating square 125 mm size with centre circular section removal and fixing type complete all as specified 78 S&F in repair grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 grams) 79 S&F in repairs stainless steel auto closer counter sunk hinges complete all as directed and as directed by Engr-in-Charge. 80 S&F Ball bearing runners 45 mm, 500 mm long Telescopic ball bearing drawer channel full extension load capacity 50 kgs, complete all as directed and as directed 81 S&F in repairs 100mm long stainless steel handle complete all as directed and as directed by Engr-in-Charge. 82 M&L in repair 12 mm thick Plywood, Grade BWR type BB fixed with screws to timber frame work for Cup board self, shutter, drawer etc complete all as specified and as directed. 83 M&L in repair 18/19 mm thick Block board Grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber frame work for Cup board shutter, drawer etc complete all as specified and as directed. 84 S&F in repair SS soap dish complete all as specified and as directed.Make:- Jaguar Cart Part No.ACN-1131N or equivalent make from the approved list of makes 85 S&F in repair door bottom seal aluminium body with rubber seal not exceeding 1000mm length complete all as specified and as directed. 86 S&F in repair 0.71mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) 87 S&F in repair stainless steel sink with draining board made out of 1mm thick sheet kitchen or laboratory with plugs, washers including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets fixed to walland connecting union to pipe overall size 914x460x203mm bowl size 405x354x203 mm including waste coupling and waste pipecomplete all as specified and directed. 88 S&F in repair sinks made of stainless steel 1 mm thick kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmincluding waste coupling and waste pipe complete all as specified. 89 S&F in repairStainless steel plate rack of size 60x90x25 cmcomplete all as specified andas directed by Engr-in-charge.Make : Nirali/Prayag/Blue star
