}

Tender For Miscellaneous Electrical Works In Nazrabad Te Annex Building On Leasing Out To Police Drce Office, Mysore., mysuru-Karnataka

Bharat Sanchar Nigam Limited has published Tender For Miscellaneous Electrical Works In Nazrabad Te Annex Building On Leasing Out To Police Drce Office, Mysore.. Submission Date for this Tender is 11-08-2025. Building Work Tenders in mysuru Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

50529616
Tender For Miscellaneous Electrical Works In Nazrabad Te Annex Building On Leasing Out To Police Drce Office, Mysore.
Tender
Indian
Karnataka
Mysuru
11-08-2025

Tender Documents

Tender Details

Tender For Miscellaneous Electrical Works In Nazrabad Te Annex Building On Leasing Out To Police Drce Office, Mysore.; 1 Replacement of Electrical Infra 2 Carrying out general repairs, maintenance and attending Electrical complaints in Annexure Bldg, TE Nazrabad, Mysore by engaging required skilled electricians/ helpers i/c checking for the fault, rectification, removing the faulty/ short circuitedcomponents/ wiring to avoid further damages and replacement of following spares, operating on 230V, 1Ø, 50Hz AC supply & testing etc as reqd. (Make: Anchor or SS Make) a). 5/6A piano type switch 3 b). 5Pin 5/6A piano type socket 4 c).5/6A piano type Two Way switch 5 d). 15/16A piano type switch 6 e).15/16A 6pin piano type socket 7 f). Steptype two module Electronic fan regulator 8 g).ITC of Existing available 20 W 4feet LED batten with driver i/c making connection 9 h). 9 W LED bulb (Make: CG/Bajaj/ Havells/ Simlr Supr) 10 i) PVC angle holder having metal ring and terminals inside 11 Complete Servicing of existing 48 inch sweep ceiling fan i/c removing from ceiling, cleaning the body and blades i/c checking for the fault/ connections/ operation etc as reqd. (Note: Replacement of spares will be paid Separately) 12 Replacement of following spares while servicing of Ceiling fansa).Rewinding of above ceiling fan with suitable gauge copper conductor i/c varnishing, baking, prdg sleeves, transportation to workshop etc as reqd. 13 b).Replacement of wornout Ball bearings for the above ceiling fan of suitable size i/c transportation to workshop etc as reqd. 14 c). Rewinding of above ceiling fan with suitable gauge copper conductor, varnishing, baking, prdg sleeves and Replacement of wornout Ball bearings i/c transportation to workshop etc as reqd. 15 d). 2.5 μ Farad capacitor for ceiling fans (Make: Havells/ Crompton or SS Make) 16 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. i). Group A 17 Supply & Fixing of following plug points for Raw power/ UPS power for computers/ printers/ projector i/c interconnection wiring etc as reqd.A).a).5/6A piano type switch-2 Nos & 5/6 A 3 Pin sockets-2 Nos with 4X7 or suitable size PVC Gang Box 18 b). 5/6A piano type switch-1 No & 5/6 A 3 Pin socket-1 No with 4X4 or suitable size PVC Gang Box 19 c). 15A piano type switch-1 No & 15 A 6 Pin socket-1 No with 4X6 PVC Gang Box 20 ITC of existing 9 sweep Metallic exhaust fan with suitable size MS flats/ frames with fastners if required including making necessary connections complete etc as reqd. 21 Supplying and Drawing of following sizes ofFRLS PVC insulated copper conductor, single core cable in the existing surface / recessed/ PVC conduit/ trunk box etc., as reqd. (For Light Ckt, UPS Ckt, Printer Ckt, Projector Ckt, AC Ckt in 3 Floors).a). 3 x 1.5 Sqmm 22 b).6 x 1.5 Sqmm 23 c). 3 x 2.5 Sqmm 24 d).6 x 2.5 Sqmm 25 e).9 x 2.5 Sqmm 26 f). 3 x 4 Sqmm 27 g).1 x 2.5 Sqmm 28 h).2 x 6 Sqmm 29 i).4 x 6 Sqmm 30 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit / painting of the surface conduit etc. complete as required. (BSNL Approved make). i).20 mm 31 ii). 25 mm 32 iii).32 mm 33 S&F Wooden Energy Meter Board of size Approx 18 X 18 with front cover (Box Type) for fixing energy meter with holes for passing the meter Incoming & Outgoing termination wires i/c S&F the 63Amps TPN MCB with PVC enclosure and16Amps SPN MCB with PVC enclosure and 3 Nos 63Amps rewirable Porcelain Fuses i/c making connections complete etc as reqd. 34 Supplying and Fixing of Base Mounting type Direct Recording 3 Phase 4 Wire 50 Hz Digital Energy meter with LCD Display suitable for measuring load 3Phase, 10 to 40 Amps as per IER specification, approved make & model i/c prdg company test certificates of meter, making I/C & O/G connections of the meter complete as reqd. (Make: L&T, Meter Spec: 3Ph 4 W kWh Dir base mtg 240V 10- 40 A Acc 1, Cat No:WR301BC6D20 or Similar Superior Make) 35 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the following manner s per dept Specification etcas reqd. Upto 35 sq. mm) a).In the existing masonry open duct / MV panel / Meter Box / Additional Cbale in the same trench etc as required. 36 b).In the existing RCC/ HUME/ METAL pipe as required. 37 c).On wall surface as required. 38 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.a).4 X 16 Sq. mm 39 Laying of Existing rigid PLB/PVC/UPVC pipe with necessary accessories for protection of armoured UG cablein the following manner as per dept Specification etcas reqd.(Note: Pipe will be issued from Department) i).In existing trench/ Duct/ Cable chamber etc as reqd. 40 ii).On surface of wall etc as reqd. 41 SITC of cable termination box made up of 16Gauge MS sheet of size 450mm x 300mm x 250mm deep with cable entry knock outs, Aluminium busbars of size 300mm x 30mm x 5mm thick fixed on a suitable FRP/SMC insulating supports, having front openable hinged door i/c painting, etc as reqd. 42 Supplying and Making the power Distribution arrangement with following DB/MCBs of C Curve with 10KA Breaking Capacity i/c making interconnections complete etc as reqd. (Make: L&T / Hager/ MDS Legrand/ ABB or Similar Superior) a) S&F of 8 Way Single Phase Metal DBsingle door 43 b). S&F of 4 Way Single Phase Metal DB Single door 44 c).S&F of 32A DP MCB With 2 WayMetal Enclosure( for AC units) 45 d). S&F 63A TP&N MCB 46 e)..S&F 63A DP MCB for UPS O/P Main 47 f). S&F 32A DP MCB for UPS DB 48 g). S&F 6A to 32A SP MCB 49 h) S&F of MCB Blanking Plates 50 Transportation of Existing PLB pipe of length approx 25 to 30 Mtrs or as required at site from Belawadi BSNL Stores to Roopanagar BTS by hiring a suitable transport vehicle approx 10 Kms to 12 Kms to & from i/c loading and unloading etc as reqd.

Key Value

Document Fees
INR 590 /-
EMD
INR 3612.0 /-
Tender Value
INR 1.80 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail