Tender For Annual Rate Contract For Miscellaneous Civil Jobs In Township Areas; 1 Chapter 1 Carriage 2 Carriageof material by Mechanical transportincluding loading, unloading & stacking upto 1km I.e. within Factory/Township Areas. 3 Lime, moorum, building rubbish 4 Earth. 5 Chapter 2 Earth Work 6 Earthwork in surface excavation not exceeding 30cmin depthbutexceeding 1.5m in width as well as 10sq.m. on plan including disposal of excavated earth leadupto 50M and lift upto 1.5m, disposed soil to be levelled and neatly dressed. All Kind of soil 7 Earthworkinexcavation by Mechanical Means (Hydraulic Excavator) / Manual means infoundationtrenchesor drains not exceeding 1.5 m in width or 10 sq.m. on plan including dressing of sides and ramming of bottoms, lift upto1.5m including getting out the excavated soiland disposalof surplus excavated soil as directed within a lead of 50m: All kinds of soil 8 Surfacedressingofthe groundincludingremoving vegetation, and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50m and lift upto 1.5m: All kinds of soli 9 Excavating holes upto 0.5 cu.m including getting out the excavatedsoilthenreturning the soil as required in layer not exceeding 20cm in depth, including consolidatingeachdeposited layer by ramming watering etc disposing of surplus excavated soil as directed with in a lead of 50m and lift upto 1.5m: All kinds of soil 10 Fillingavailableexcavated earth (excludingrock)in trenches,plinth, sides of foundation etc.in layers not exceeding20 cms in depth:consolidating each deposited layer by ramming and watering lead upto 50 m andlift upto 1.50 metres. 11 Supplying Chemical emulsion in sealed containers including delivery at site Chlorpyriphos / Lindane emulsifiable concentrate of 20% 12 Chapter 3 Mortar 13 Deleted 14 Chapter 4 Concrete Work 15 Providingandlayinginpositioncement concrete of specifiedgradeexcludingthecostofcentring and shuttering All works upto plinth level. 16 1:1.5:3(1cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 17 1:2:4(1cement:2coarse sand: 4 graded stone aggregate 20mm nominal size). 18 1:3:6 (1 Cement : 3 Coarse sand : 6 graded stone aggregate 20 mm nominal size) 19 1:5:10 (1 cement:5 fine sand: 10 graded stoneaggregate 40mm nominal size). 20 Makingplinth protection 50mm thick of cementconcrete 1:3:6(1 cement:3 coarse sand:6 graded stoneaggregate 20mmnominalsize) over 75mm bed of dry brickballast 40mmnominal size well rammed and consolidatedgrouted with fine sand including finishing the top smooth. 21 Chapter 5 Reinforced Cement Concrete 22 Providingandlayinginpositionspecified grade of reinforced cement concreteexcludingthecostof centring,shuttering,finishing andreinforcement.All work upto plinth level. 23 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size). 24 Reinforcedcement concreteworkinbeams,suspended floors,roofs,havingslopeupto 15 degrees, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). 25 Providing, hoisting and fixing upto floor five level precast reinforced cementconcrete in lintels, beams and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring and shuttering and finishing smooth with 6mm thick cement plaster1:3 (1 cement: 3 fine sand) on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 26 Centeringandshuttering including strutting, propping etc.and removal of form for: 27 Foundations,footings,basesofcolumns etc. or mass concrete and precast shelves. 28 Suspendedfloors,roofs,landings balconies and access platforms. 29 Shelves.(Cast in situ) 30 Lintels,beams,plinth beams,girders,bressumersand cantilevers. 31 Reinforcementfor RCC work ( TMT ) including bending,binding,straightening and placing in position complete: ISIsteel 32 Chapter 6 Masonary Work 33 Halfbrick masonry with bricks of class designation75 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) 34 Extraforhalfbrickmasonry in superstructure above plinth level upto floor v level. 35 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in superstructure above plinth level up to floor V level in cement mortar 1 : 6 ( 1 cement : 6 coarse sand). 36 Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in : cement mortar 1:6 (1 cement: 6 fine sand ) 37 Brick work with bricks of class designation 75 in superstructure above plinth level upto floor five level in cement mortar 1:6 (1 cement : 6 fine sand ) 38 Chapter 8 Cladding Work 39 Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machine cut for kitchen plateforms, vanity counters facias and similar locations of required size of approved shade colour and texture laid over 20 mm thick base cement mortar 1 : 4 ( 1 Cement : 4 Coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch up including rubbingcuring etc. complete : Area over 0.50 Sq.M. : Graniteor any colour and Shade 40 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (Thickness to be specified by manufacturer ) of approved make in all colours and shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and joining with grey cement slurry @ 3.3 kg. per sqm including pointing in white cement mixed with pigment of matching shade complete. 41 Providing and fixingceramic glazed floor tiles300 X 300 mm (Thickness to be specified by manufacturer) of 1st quality conforming to IS:15622 of approved make in clours such as White, Ivory, Grey, Fume Red Brown etc. laid on 20 mm thick CementMortar 1:4 ( 1 Cement : 4 Coarse Sand) including pointing the jointswith white cement and matching pigment etc., complete. 42 Chapter 9 Wood and PVC Work 43 Providing woodworkin framesofdoors,windows clerestorywindows and other frames, wrought framed and fixed in position : Hollock wood.( Without Kiln Seasoning & Chemical Treatment) 44 Deleted 45 Providingandfixingpanelledor panelled and glazed shuters fordoors,windowsandclerestorywindows includingISI marked blackenamelled/ brightfinishedM.S. butt hingeswithnecessaryscrews including panelling with second class Hollockwood or 12mm thickwaterproof ply complete.(Area of opening of pannel inserts excluding portion inside the groove or rebateto be measured) Hollock wood - 35 mm thick.(Without Kiln Seasoning & Chemical Treatment) 46 Providing and fixing glazed shutters for doors, windows & clerestorywindowsusing 10.0 kg/squaremetre(4mm thick)glasspanesincluding blackenamelled ISI marked M.S.butt hinges with necessary screws. Hollock wood - 30 mm thick.(Without Kiln Seasoning & Chemical Treatment) 47 Deleted 48 Providingandfixingwiregauzeshutters for doors, windows and clerestory windows usinggalvinised M.S.wire gaugeofaveragewidth of aperture 1.4mm with wire of diaof0.63mmincluding ISI marked bright finished or/and black enamelled M. S. butt hinges with necessary screws. Hollock wood - 35 mm thick.(Without Kiln Seasoning & Chemical Treatment) 49 Providing and fixing M.S.Griil of required pattern in wooden frames of windows etc. with M.S. flats, square or round bars etc. all complete. 50 Deleted 51 Deleted 52 Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm dia bolts;nuts and wooden plugs and embeddings in cement conc block 30x10x15cm 1:3:6 mix(1cement:3coarse:6graded stone aggregate 20mm nominal size) 53 Providingand fixing ISI marked oxidised M.S. pressed butt hingeswithnecessary screws etc.complete : 54 100x58x1.9mm 55 75x47x1.7mm 56 Deleted 57 Deleted 58 Deleted 59 Deleted 60 Deleted 61 Providingandfixing ISI marked oxidisedM.S.haspand staple(safety type) cnforming to IS:363 with necesary screws etc. complete. 115 mm 62 Deleted 63 Providing & fixing chrominium plated brass 100mm mortice latchand lock with 6 levers & a pair of leverhandles withnecessaryscrewsetc.complete(Bestmakeof approved quality Godrej, Bolt, Link etc.) 64 Providing and fixing Aluminium Tower Bolts anodised transparent or dyed to required colour / shade with necessary screws complete : 65 200 X 10 mm 66 150 X 10 mm 67 100 X 10 mm 68 Providing and fixing Aluminium handles anodised transparent or dyed to required colour / shade with necessary screws etc. complete : 100 mm 69 Providing & fixing aluminium hanging floor door stopper anodised(anodiccoating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper 70 Providing and fixing plywood, one side Decorative veneer conforming to IS: 1328 (type - 1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with: 71 Decorative Veneer facings of approved manufacture, 4 mm thick 72 Deleted 73 Chapter 10 Steel Work 74 StructuralSteelworkin single section fixed without connecting plate including cutting, hoisting, fixingin positionandapplying a priming coat of approved steel primer : all complete. ALL STRUCTURAL STEEL TOBEARRANGEDBY THE PARTY FROM OPEN MARKET ATHISCOST ). 75 StructuralSteelworkriveted, bolted or weldedinbuiltup sections, trussesandframedworkincluding cutting, hoisting, fixinginpositionandapplyingaprimingcoat of approved steel primer all complete. ALL STRUCTURAL STEEL TOBEARRANGEDBY THE PARTY FROM OPEN MARKET ATHISCOST ). 76 Steelworkweldedinbuiltup sections/framed work including cutting hoisting,fixinginpositionand applyingapriming coat of approved steel primer using structural steel etc. as required. In gratings,frames,guard bars,ladders,railings,brackets, gates and similar works. ALL STRUCTURAL STEEL TOBEARRANGEDBY THE PARTY FROM OPEN MARKET ATHISCOST ). 77 Providing and fixing pressed steel door framesmanufactured from pre-fabricated corrosion Resistance Mild steel available in the market as Japanese Sheetof 1.22mm thickness including hinges jambs, lock jambs, bead and if required angle threshold of mild steel angle ofsection 50 x 25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by Mechanical means, adjustable lugs with split and tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer and painted after pre-treatment of the surface as directed by Engineer - in - Charge.( Rate should include cost of replacement / fixing orpressed steel chowkhats including cutting masonary / hold fastsand removing the existing damaged chowkhat alongwith shutter,fixing holdfastsin cement concrete 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20mm nominal size) ,refixing the shutter(s)by providing & Fixing newscrews wherever reqiured , easing of door shutters and makinggood the damagesto walls and floors,to match the existing surface complete. 78 For Single Shutter 79 For double shutter 80 Chapter 11 Flooring 81 Brickon edge flooring with bricks of class designation 75includingcementslurry etc.completeincement mortarwith F.P.S bricks. 1:6 (1 cement : 6 coarse sand) 82 Cementconcreteflooring 1:2:4(1 cement:2 coarse sand: 4gradedstoneaggregate) finished with a floating coat of neat cement including cement slurry,but excluding the cost of nosing of steps etc.complete. 40mm thick with 20mm nominal size stone aggregate 83 Providing and fixing glass strips in joints of terrazo/cement concrete floors 40 mm wide and 4 mm thick 84 Deleted 85 Deleted 86 Providing & layingpolishedVitrifiedFloor Tilesin different sizes (thickness to be specified by the manufacturer)with water absorptions less than 0.08 % and confirming to IS 15622 of approved make in all coloursand shadeslaid on 20mm thickcement mortar1 : 4 (1 cement : 4 coarse sand lncluding grouting the joints with white cement and matching pigmnets etc. complete. Size of tile 50 Cm x50 Cm/60 Cm X 60 Cm 87 Chapter 12 Roofing 88 Providing corrugated G.S. Sheet roofing including Vertical / curvedsurfaces fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumenandG.I.limpetwashersorwith G.I. limpet washersfilled with white lead and including a coat of approvedsteelprimerandtwocoats of approved paint on overlappingofsheets complete (upto a any pitchin horizontal / vertical or curved surfaces ) excluding the cost of purlins,rafters and trusses and including cutting to sizeand shape wherever required :: 1.00 mm thick with zinc coating not less than 275gms/m2 89 Paintingtop of roofs with bitumen of approvedquality at17kg.per 10m2 impregnated with a coat ofcoarse sandat60dm3per 10m2 includingcleaningtheslab surfacewith brushes and finally with a piece ofcloth lightly soaked in kerosene oil complete Blown type petroleum bitumen of penetration 85/25 90 Providinggola75x75mmincement concrete (1 cement : 2 coarsesand:4stoneaggregate10mmanddown guage) including finishing with cement mortar 1:3 ( 1 cement:3 fine sand) as per standard design. In 75x75mm deep chase. 91 Providing and fixing on wall face unplasticised - Rigid PVC rain waterpipes conforming to IS:13592 Type A including jointing with sealring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes 110 mm diametre 92 Providingandfixingonwallface unplasticised PVC moulded fittings/accessoriess for unplasticised Rigid PVC rain waterpipesconformingto IS: 13592 including jointing withsealring conforming to IS:5382 leaving 10 mm gap for thermal expansion 93 Coupler 110mm 94 Bend 87.5 degreee 110mm bend 95 Providingandfixingunplasticised-PVCpipe clips of approved design to unplasticised PVC rainwater pipesby meansof50X50X50 mm hard wood plugs screwed with M.S.srews of required length including cutting ofbrickwork andfixingincement mortar1:4 (Icement : 4 coarse sand) and making good the wall etc. complete. 110 mm 96 Providing and fixing on wall face unplasticised - Rigid PVC rain waterpipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. Single socketed pipe 40 mm diameter 97 Deleted 98 Chapter 13 Finishing 99 12mm cement plaster of mix 1:6 (1 cement :6 fine sand). 100 15mmcement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement :6 fine sand). 101 Deleted 102 Pointingon brick work or Brick Flooring with cement mortar 1:3 ( 1 cement :3 fine sand) : Flush / ruled / struck or weatheredPointing. 103 Chapter 14 Repairs to Building 104 Repairs to plaster of thickness 12 to 20 mm in patches ofarea2.5sq.metres and under including cutting the patchinproper shape and preparing and plastering the surfaceofthewallscompleteincluding disposal of rubbish to the dumping ground within 50 metres lead: With cement mortar 1:4 (1 cement :4 fine sand): 105 Fixing chowkhats in existing opening including embedding chowkhats infloors or walls cutting masonry for hold fasts embedding hold fasts in cementconcrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20mm nominal size) painting two coats of coal tarto sides of chowkhas and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead: 106 Door chokhats. 107 Window chowkhats. 108 Renewingglasspanes,withputtyand nails wherever necessary Float Glass panes of thickness 4 mmweighing 10 kg/m2 109 Renewingglasspanesandre-fixingexistingwooden fillets 110 Float Glass panes of thickness 4 mm 111 Float Glass panes of thickness 5 mm 112 Deleted 113 Renewal of old putty of glass panes(length) 114 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zink chromate yellow primer of approved brand. 115 Deleted 116 Providingand fixing / replacing white vitreous china watercloset squatting pan(Indian type) Long pattern W.C.pan of size 580mm./ Orrisa pattern 580 X 440 mm 117 Deleted 118 Cutting holes upto 15cm x 15cm in R.C.C.floors and roofs forpassingdrainpipeetc.and repairing the holes after insertion of drain pipe etc. with cementconcrete 1:2:4(1cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) including finishing complete so asto make it leak proof. 119 Making chase upto 75 X 75 mm in walls including making good after housing pipes etc. 120 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with c.P. brass screws and wooden plugs etc. wherever necessary complete : 12 mm dia 121 Cleaning of chocked sewer line at all depth by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm The complete removal of all the obstructions/blockage accumulated such as silt, sand, debris, all other wastes etc 122 Removing chokage ofWC / Floor Trap / Gully Trap including removal and refixing of CI/ MS or concrete covers of Gully Traps 123 Replacement/fixing / refixing door/window shutter including removing old shutter and fittings , refixing of old fittingsto the new shutter, adjusting the shuttter by cutting, plaining / easing / oiling for smooth functioning complete.(double leafshutter shall be considered as 1 unit only for measurementupto 3 sq. mtr.Area 124 Chapter 15 Dismantling and Demolishing 125 Demolishing cementconcrete mannually / Mechanical means includingdisposalof material within 50mtrs lead. 1:3:6 or richer mix. 126 DemolishingR.C.C. mannually / by Mechanical means work including stackingofsteel barsanddisposal of unserviceable material within50 metres leads. 127 Extraforcutting reinforcement bars mannually / by Mechanical means in R.C.C. or R.B. work(Paymentshallbe made on the cross sectional area of R.C.C. or R.B. work). 128 Demolishing brick work mannually / by Mechanical means including stacking of serviceable material&disposal of unserviceable materialwithin 50mtrs lead : In Cement Mortar. 129 Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats,architrave holdfasts etc. complete andstackingany where within NFL complex including dismantling MS Grill fromwindow/vent chowkhats of area 3 sq.m. and below.(Double leaf shuttershall be treated as 1 unit only for measurement ) 130 Dismantlingroofing including ridges, hips valleysand gutters etc.and stacking the material within 50 metres lead of: Asbestos/ CGI / Aluminium / any other type Sheets 131 Taking out doors, windows and clerestory windowshutters(steel or wood) including stackingany where in NFL Complex of area 3 m2 and below (double leafshutter shall be treated as one unit only). 132 Dismentling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metre lead. 133 Chapter 16 Road Work 134 Supplying at siteAngle Iron Posts and struts of required sizes including bottom to be split and bent at right angle in opposite directions for 10 cm length and drilling holes upto 10 mm dia 135 Chapter 17 Sanitary Installations 136 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and CP brass spreaders with bass unions and GI clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 litre white PVC automatic flushing cistern 137 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 138 Providingandfixing / replacing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS 7231,with all fittings and fixtures complete 10 litre capacity - White 139 Providingandfixingsolidplastic seat with lid for pedestal typeW.C.panof make Parryware/Hindware/Seabird/Orient (Coral) with C.P. brass hinges, rubber buffers etc. complete: 140 Deleted 141 White Solid Plastic Seat with lid 142 Providingandfixing G.I.inlet connection forflush pipe connecting with W.C.Pan 143 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 144 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.waste fittings complete. 145 semi rigid pipe32 mm dia 146 semi rigid pipe40 mm dia 147 Providingandfixing 100mm Sand Cast Iron/C.P. grating for gully, floor or Nahni trap. 148 Providing and fixing / replacing 600 X 450 mm bevelled / Plain edge mirrorof superior glass ( of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.Pbrass screws and washers. 149 Providingand fixing soil, waste and vent pipes: Sand cast iron S&S pipe. As per IS 1729 150 100mm dia 151 75mm dia 152 Providing and fixing plain bend of required degree 100mm Sand cast iron S&S as per IS 1729 153 Providingandfixing Cast iron trap of selfcleansing designwithSandCastiron screweddownorhinged gratingwithor without vent arm complete,inclulding cost of cutting and making good the walls and floors: 100mm inlet and 75mm outlet Sand cast iron S&S as per IS 1729 154 Providing and fixing PTMT / CP Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality &colour and make 600 mm long towel rail with total length of 645 mm, width78mm and effective height of 88mm, weighing not less than 190 grams 155 Providing and fixing PTMT / CP Brassliquid soap container 109mm, wide 125 mm high, and 112 mm distance from wall of standard shape with bracket of the same material with snap fittings of approved quality &colour Weighing not less than 105 gms 156 Providing & fixing square mouth S.W. gully trap grade Acomplete withC.I. Grating brick masonry chamber with water tight CI cover with frameof 300X300 mm (inside)size the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design 100X100 mm size P Type with FPS bricks of class desig 75 157 Providing and fixing kitchen sink with CI brackets, CP brass chain with rubber plug 40 mm CP brass waste complete including painting the fittings & brackets, cutting & making good the walls wherever required. White glazed fire clay kitchen sink size 600x400x250 mm 158 Provding & fixing600x120x5 mm glass shelfwith edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete. 159 Providing & fixing of toilet paper holder: CP Brass 160 Providing and fixing Salem Stainless steel A ISI 304 (18 / 8) kitchen sink as per I.s. 13983 with C.I. Brackets and stainless steel plug40mm including painting of fittings and brackets, cutting and makinggood the walls wherever required: Kitchen sink without drain board 610 x 460 mm bowl depth 200 mm 161 Providing and Fixing / replacing washing jet to Europeon Type WC. Including making all connections / disconnections of water supply system 162 Providing and fixing white vitreous china water closet squatting pan(Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litrelow level P.V.C. flushing cistern (of approved make) with fittings,C.I./M.S. brackets, 32 mm diameter flush pipe with fittings and clamps,overflow arragement with specials and mosquito proof coupling of approved muncipal design including painting of fittigs and brackets,cutting and making good the walls and floors wherever required:Long pan pattern W.C. pan of size 580 mm with flushPipe & overflow arrangement. 163 Chapter 18 Water Supply 164 ProvidingandfixingG.I.pipes completewithG.I. fittingsand clamps, including cutting and makinggood the walls etc.(internal work) :Exposed on wall 165 15mm nominal bore. 166 20mm nominal bore. 167 25mm nominal bore 168 32mm nominal bore 169 40mmnominal bore 170 50 mm dia nominal bore 171 ProvidingandfixingG.I.pipes completewithG.I. fittings including trenching andrefilling etc. (external work). 172 15mm nominal bore. 173 20mmnominal bore 174 25mmnominal bore 175 32mmnominal bore 176 40mmnominal bore 177 50mmnominal bore 178 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee including cutting and threading the pipe etc. complete. 25to 40 mm nominal bore. 179 Providing and fixing brass bib cock of approved quality : 15mm nominal bore. 180 Providing and fixing brass stop cock of approved quality : 181 15mm nominal bore. 182 20mm nominal bore. 183 Providingandfixingball valve (Brass)ofapproved quality complete : Highorlowpressure with plastic floats 15mm nominal bore 184 Providingandfixing unplasticised P.V.C. connection pipe with brass unions : 45 Cm length - 15 mm nominal bore 185 Providingand fixing C.P.Brass shower rose with 15 or 20mm inlet: 100mm diameter. 186 Providing and fixing C.P.Brass bib cock / Stop Cock / Angle Cock of approved quality 15 mmnominal bore 187 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 188 80 mm nominal dia Pipes 189 100 mm nominal dia Pipes 190 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 191 15 mm nominal outer dia Pipes 192 20 mm nominal outer dia Pipes 193 Chapter 21 Aluminium Work 194 Providing and fixing anodised aluminium work fordoors, windows, ventilators and partitions with extrudedbuilt upstandradtublar and other sections of approved make confirmingtoIS:733 and IS:1285,anodised transparents ordyedto required shade according to IS:1868.(Minium anodic coating of grade AC 15) fixed with rawl plugs and screwsorwithfixingclips,orwithexpansion hold fastnersincludingnecessaryfillingupofgaps at junctionsattop,bottomandsideswith required PVC /neoprene felt etc. Aluminium sections shall besmooth, rustfree,straightmitredandjointed mechanically whereverrequiredincluding cleat angle,Aluminium snap beading for glazing/panelling C.P. brass/stainless steel screwsallcomplete as per Architectural drawings and thedirectionsofEngineer-in-charge.(Glazing and panelling to be paid for separately) For fixed portion. 195 For shutters of doors, windows and ventilators including providing and fixing hinges/pivots and makingprovision forfixingof fittings wherever required including the cost of PVC/neoprene gasket required 196 Providingandfixing glazing in aluminium door,window, ventilatorshuttersand partitions etc. with PVC/neoprene gasket etc. complete as per thestructural drawingsandthe direction of Engineer-in-charge.(cost of aluminium snap beading shall be paid in basicitem.) 197 i) With float glass panes 4 mm thickness 198 Withfloat glasspanesof5.50 mm thikness 199 Providingandfixingdoubleactionhydraulicfloor spring of approved brand and manufacture IS : 6315 marked, Hardwyn make (Model 3000) or equivalent for doors including cost of cutting floors a required, embedding in floors and coverplates with brass pivot and single piece M.S. Sheet outer box with slide plate etc. complete as per the direction ofEngineer-in-charge. With Stainless Steel cover plate 200 Chapter 22 Water Proofing 201 Deleted 202 Chapter 23 Rain water Harvesting and Tubewells 203 Deleted 204 NS Item 205 Providing and fixing washing hand spray jet of approved quality to European type WC including making all connection to existing water supply system. 206 Providing and fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 type S, including cost of adhesive of approved quality: 1.00 MM thick 207 Providing and fixing 22 SWG ( 0.7 mm ) thick Aluminium sheet to doors including cutting and fixing with suitable nails/screws complete. ( The area of Aluminium sheet actuallyfixed inpositionwillbe measured for payment). 208 Hacking R.C.C./P.C.C. surface for roughening to get a good bond including disposal of rubbish (Any where in NFL Complex ) 209 Chipping of plain cement concrete or R.C.C. upto 25 mm depth on floors, walls, roofs, columns pillars for exposing reinforcement or for roughening the area at all heights and depths. 210 Making pockets in R.C.C. or P.C.C. upto 200 mm depth/with size of pockets upto 150x150 mm at vertical/Horizental surfaces at all heights & depths complete including making goodwherever required. 211 Making pockets in bricks work in cement mortar upto200 mm depth with size of pocket upto 200x200 mm at vertical/Horizental surface at all heights & depth complete including making good wherever required. 212 Cutting bitumenous/water bound road including disposal of surplus materialany wherever within NFL complex but wihtout making good the same. 213 Grinding the existing Marble stones / Mosaic floors,skirting,dados , platform , or any other areamanually or by machines including finishing, polishing complete ( Thegrinding stone, machine,polish & detergentswill be arranged by the contractor at his cost: Ordinary finish 214 Making good the pockets in RCC/PCC or Brick workwith Cement concrete 1:2:4(1Cement:2C.Sand:4Graded Stone aggregate) 215 Removing and refixing of RCC covers slabs from/ ondrains / pipes trenches/ cables as the case may be in theplant or outside plant area in following sizes irrespective of the thickness/width of the slab 216 Span of slabupto 500 mm 217 Span of slab from 501 to 1000 mm 218 Span of slab above 1000 mm 219 Erection / fixing in position to the true line and level the Safety sign boards ( Only erction charges of boards) 220 Erection ofAir Cooler / Air Conditionerin window of quarters/offices including dismantalling of window shutters, cutting of grills making holes in walls, grouting of supports after fixing wooden battens / steel frame wherever required, erecting the cooler / A.C in position closing the opening with plywood and screws ,making good the surface to its original condition/ shape,complete (wooden batten / steel frames and ply wood will be supplied free of cost by NFL / only for Public Building) 221 Ground Floor 222 First floor 223 Only erection of Cooler / AC to the already installed supports including removal of window shutter, cutting of grills wherever required OR dismantalling /unloading of cooler / A.C from its erected position and re-fixingof plywood/window shutters / panes as the case may be. 224 Errection of geysers/ Exhaustfans of all sizes including making holes in walls grouting ofbolts wherever required andre connecting of water supply system 225 Lowering of geysers/ Exhaustfans of all sizes including disconnecting of water supply system. 226 Repair of cracked AC sheets in patches (area of single patch not exceeding0.50 Sq.M ) by fixing AC Sheet pieces by providing and applying sealing compound whatever requiredat all heights etc complete 227 Fixing / Replalcing ofAC/CGI /FRP/ / Aluminium / Translucent plain, orcorrugated sheets &fittings for all heights etcincludingproviding and and fixing nuts , bolts, GI , J or L hooks,bitumen washers , GI washers etc. complete. ( Sheets & fittings shall besupplied free of cost by NFL.supplied itsStores but carriage of the same shall be done by contractor at his cost)) 228 Providing & fixing G. I. barbed wire fencing at missing locations / replacing the old damaged barbed wire to its entire elevation area with RCC / structural steel fencing poles At ground level or at top of boundary wall or at any other locations including dismantling of old barbed wire, wherever required complete. 229 Providing & Fixing / replacing C.P. Brass waste for kitchen sink/ wash . basins etc.: 230 ForSinks50 mm dia 231 ForSinks 40 mm dia 232 ForWash basins 32 mm dia 233 Providing and fixing / replacingC.P. brass pillar cock 15 mm including removing old cock wherever required. 234 Providing and fixing / ReplacingPVCsyphon with fittings ofapproved quality for low level flushing ciltern. 235 Repair of Bib Cock / Stop Cock / Pillar Cock/ Ball cock/ Ball valve 236 By adjustment or / and by providing washers 237 By providing / replacing Brass face 238 Fixing old / dismentalled GI Pipe lines in Internal / External water supply System including all necessary New GI Fittings. ( NFL shall provide only old GI Pipes at its stores) 239 15 mm nominal bore 240 20 mm& 20mm nominal bore 241 25 mm nominal bore 242 Providing and Fixing / replacing GI Fittings such as Tees, Bends, Sockets, Nipples, Union or any other GI fittings in the old / New water supply Lines 243 15 mm nominal bore 244 20 mm nominal bore 245 32 / 40mm nominal bore 246 Providing and fixing / Replacing CI, P or S Trap for WC seat of size 75-100mm with necessary material including dismantalling the old damaed piece. 247 Rectification of seepage from WC/floor traps includingdemolishing of floors, walls etc. and making good the same in original condition to make it leak proof . 248 Providing & Fixing PVC long Bend with Flushing Pipe 32mm dia heavy duty with brass coupling etc. complete 249 Providing and fixing/ Replacing the following fittings ofPVC Low level flushing cistern:PVC washer for Syphon 250 Repairs / rectification / adjustment of high level/ low level flushing cistern / urinal cistern ,complete to avoid overflow and for smooth functioning. 251 Refixingof Kitchen Sink / wash basin including removal of the old sink / wash basin alongwith fittings, refixing the fittings, adjustment oflevel of brackets as per site requirements 252 Repairing/serviceing of rolling collapsibel/shutters of garrages (excluding the cost ofspare parts) includingdismentalling of shutters and fiittings whereverrequired, oiling greasing etc. removing dents, fixing inposition, the loosepart of the shutters and its accessories with nuts,bolts nails etc. completefor smooth functioning of the shutter (Paymentto be made for clearopening at the shutter). 253 Rolling shutter. 254 Cleaning of sewer lines of any size of effluent sewer / chemicals sewers for smooth functning of sewer lines including removing chockings and removing / refixing of CI/ MS or concrete covers, in the sewers with all labour and tools and cleaning of manholes: 255 Upto 1 Mdepth 256 More than 1 MDepth 257 Cleaning /removing chocking of Manhole of any size / depth including taking out muck / debries for smooth flow of sewers 258 Cleaning / sweeping of roofs /tarracesor floors , from accummulation of Ash / dust / loose materials and or uprooting rank vegitaion / leaning algi etc. of the Public Building in Township/ Electrical Station including cleaning of outlet points of Rain Water Pipes,collecting the sweeped materials and bringing the same to the ground / upto 50 M leadcomplete Roofs / tarraces . 259 Deleted 260 Deleted 261 Making arrangementto remove accumulation of water from the road berms either by making road cuts on road berms orby some other normal arrangement as directed . 262 Desilting by removingmuck / sl;ush / Earth in muddy /slushy and in foul condition from the running drains carrying plant effluents from Plantincluding taking outthe slush / muck from the drains& hume pipe or RCC slab culverts and transporting the muck within one Km leadi.e.any where within plantarea andcleaning thesite complete in all respects. 263 Replacement of fly proof galvanished M.S. wire gauge to doors. Windows etc. (Wire gauge designation 85G with wire dia 0.56mm). With old / by providing new wooden beeding 264 Repair /fixing of damaged wire gauge of existing doors / windows by tightning , nailing, and fixing wooden beeding wherever required 265 Doors 266 Windows 267 Providing and fixing / replacingapproved quality hydraulic door closure to doorincluding removal of old one if any. 268 Repair / adjusting the speed of of Hydralic door closers for smooth functioning 269 Providing andfixing / replacing bright finished or/and black enamelled MS helical door spring/coil spring with necessary nuts / bolts / nails / screws etc 270 Providing and fixing wooden cleats of size 100mm x 75mm x 50mm to doors & windows withapproved fittings including removal of old cleats wherevernecessary 271 Fixing / refixing on the existing pegs / by providing new pegs(Gitties) / rowal plugs by drilling 272 Glass shelves 273 Glass of Glass shelf 274 Looking Mirror with existing AC Sheet / Ply Backing 275 Towel Rail / Ring / Soap Contaianer / Soap dish 276 Pelmets / Curtain Rods / Hanger rod of CupBoard / Frames / Boards / or any other similar item 277 Adjusting Drawer of Cup Board for smooth operation 278 Fixing Old glass panes in windows / ventilators by providing Putty / wooden beading wherever required. ( Old Dismentalled glass to be reused by cutting to required sizes) 279 Removing grill from window / ventilatorsincluding un screwing / cutting by Hexa blade. 280 Fixing of Grills in wooden chokhats with screws / or in concrete / brick masonary (labout charges only) 281 Fixing / replacing of safety lock / mortice lock to the door shutters with necessary nuts, bolts and screws . (Only lock shall beissuedfree by NFL). 282 Providing & Fixing / replacing levers / Handles of Mortise Locks with all necssary screws. 283 Providing and fixinggood quality looking mirrorof any size fixed on a baseof 6 mm thick ply wood / plain AC sheet with 60 x 20 mm beading of teakwood as framed complete one, if required 284 Preparation of door shutter from old / damaged / removed shutter by using the serviceablewooden materials fittings of old shutters.(panels of shuttersif required to be replaced shall be paid extra ) 285 Preparation of window shutter from old / damaged /removedshutter by using the serviceable materials / fittings of old shutter. 286 Repair in patches upto 300mm length to wooden doors chowkhats infixed position with old/new wooden section including jointing with fevicol /nails, refixing of shuttersadjusting the shutter by cutting, plaining / easing / oiling for smooth functioning complete wherever required and repair to ]floors etc.complete as per site requirement. 287 Replacement / fixing door / windowwooden or Structural steel chowkhats including cutting masonary / hold fastsand removing the existing damaged chowkhat alongwith shutter,fixing holdfastsin cementconcrete 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20mm nominalsize) painting a coat of coal tar to sides of wooden chowkhats ,refixing theshutter(s) with old hinges and screws or by providing & Fixing new hingesand screws adjusting he shuttter by cutting, plainig / easing / oiling for smooth functioning wherever reqiured ,and makinggood the damages to walls and floors,to match the existing surface complete. 288 Easing / oiling of door / window / ventilator shutters for its smooth functioning by planing or rectification of hinges by providing new screws,or setting right the sliding door bolt, tower boltshandelsby providing new screwsetc.(Each Door or Window or ventilator opening / chowkhat shall be measured as 1 (One) unit irrespetive of the Nos.& typeof shutters it contains) 289 Providing & Fixing 2mm thick rubber strip into doors upto75mm wide including fixing with 20mm Aluminium strip& Nails Screws Complete 290 Repair/maintenane of already installed Aluminium door shutters in control rooms or other places at all heightsincluding replacement of cap Washers of hinges, oil seals of floor door springs, greasingfixing of damaged/missing rubber lining,replacement of damaged/missing aluminium glazing strips, removal and installation of shutters if required for to put it in good working conditionvcomplete in all respects as per the direction of Engr-in-charge(Nothing extra shall be paidof the minor replacements. Each dorr frame irrespective of the Nos. of shutters it contains, shall be treated and measured as One unit) 291 Removing peepal or other sapling of trees of 1.00 M height (minimum) from top of building roofs, walls and chhajjas including uprooting the tree,removing tiles/bricks andrefixing the same with cement mortar wherever required, to original condition complete 292 Repairs to RCC chhajjas of all sizes and thickness including dismantling the damaged portionand redoing the same withcement concrete/cement mortar scaffolding, centering, shuttering and finishing complete ( Bottom Size of Chhaja to be measured for payment. Cement consumption shall be 0.10 Quintal per Sq.M ) 293 Providing & fixing water proof ply on/around fan hoods of cooling/stipping towers or on any portion interior/exterior of the said structureor anywhere in the plantarea / Township Area ,with necessary nails/scewsincluding fixing the ply wood in the shape as per site requirement (payment for actual ply wood area shall be made. SS Nails, Nuts & Bolts if requred to be fixed shall be supplied free by NFL) 294 12mm thick marrine (water proof) ply 295 6mm- do - 296 4mm - do - 297 4mm thick commercial ply 298 Replacement of damaged floor door springs including(double action) of heavy duty ISI mark 299 Labour charges for fixing old available water proof ply /commerial ply on/around fan hoods ofcooling/stippingtowers or on any portion interior/exterior of the said structure or anywhere in the plant/ Township area with necessarynails/scews including fixing the ply wood in the shape as per site requirement(payment for actual ply wood area shall be made. SS Nails, Nuts & Bolts if required to be fixed , shall be supplid free by NFL) 300 12mm / 9 mm thick 301 6mm / 4mm thick 302 Preventive Maintenance of Raw Water Reservoir No. I & II, Filling the rat/snake holes on top of Katcha Bandhs of Raw Water Reservoir No.I &II including removal of Trees, Bushes including Preventive maintenance of the embankments like repairing of minor raincuts, preventing errosion of earth etc. on inner and outer portion of the embankments of both the reservoirs by deploying minimum one No.labour per day in general shift (8.00 AM to 5.00 PM ) -- complete as per direction of Engr.In.Charge. 303 Jointing old bricks work in F.P.S. system with new brick work in cement mortar 1:4 (1 cement: 4 coarse sand ) inmetric system. 304 Supply of empty cement HDPE/plastic bags duly filled inwith earth/ash and stitched at top including placing in partscomplete (Qty. of earth filled to be paid separately unde rrespective item) 305 Providing& Fixing of Chequered precast cement concrete tiles 22 mm thick on foot paths / courtyards / jointed with neaat cementslurry mixed with pigment to match the shade of the tileincluding rubbing and cleaning etc. on a bed of 20 mmthick of cement mortar 1 : 4 ( 1 Cement : 4 : Coarse sacd) 306 Making banni with approximate size of50mm X 50 mmSquare or 50 mm halfround with cement concrete 1 : 2 : 4 ( 1Cement : 2Coarsesand : 4 stone aggreaagare 10 mm size) 307 Dismentalling of existing damaged angle Iron nozing old rains by cutting PCC / RCC and refixing the new angle nozing to the true line and levels for supprting the drain covers by chipping the concrete for making recess for grouting with concrete and grouting the angle iron and the lugs with cement concrete including necessary shuttering / supports complete. (Concrete for grouting shall be paid seperatly under respective item of Schedule of quantities) 308 Scouring of under ground drinking water main headers byopening of sluice / gate valves located at differentlocations, to allow flow of water in the open till clear waterstarts flowing and then closing the sluice / gate valve including removal and refixing of CI / RCC covers. 309 supply of material 310 Coarse Aggregate 10 mm nominal size 311 Fine sand 312 Providing & fixing CP 15 mm Angle valve & short neck bib cock. 313 Providing and fixing6 mm dia CP copper pipe for water mixer etc. 314 Providing and fixing CP Extension Nipple. 315 Providing/ replacing asbestos cement 6 mm thick corrugeted sheets roofing & fixing with G.I.J. or L hooks, bolts and nuts 8mm dia G.I. plain and bitumen washers complete excluding the cost purleins rafters and trusses: corrugated sheets upto60 degree pitch For all heights of roofs/conveyers etc in township area 316 Providing & fixing ridges and hips in asbestos cement sheet roofing : close fitting adjustable ridges in pairs 317 Providing & fixing plain AC sheet ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) 4 mm thick 318 Precast cement concrete inter locking paver (Tiles) with surface prepared with water cement ratio less than 0.3 and compressed under the Hydraulic Pressure.The compressive strength of inter locking paver shall not be less than 200 kg/CM2. 319 I Shape 200x160 mm x 60 mm 320 I Shape 200x160 mm x 80 mm 321 Supply of Mechanical excavator/JCB including diesel and operator, for urgent excavation jobs on hourly basis, as per site requirement and instructions of Engineer-In-Charge. (per daymeans = minimum 8 hours working. 322 Brick work (with old/dismanteled bricks) in superstructure above plinth level upto floor five level in cement mortar 1:6(1 cement:6 fine sand) 323 Brick work (with old/dismantled brick) in F&P with cement mortar 1:6 (1 cement: 6 fine sand) 324 Supply of Hydraulic Tractor trolley for shifting the material , debris material and earth ,sludge , in township area as per direction direction of EIC.( The rate shall be included the cost of minimum 3 nos labour & driver and Diesel oil etc complete) 325 Part B labour Supply 326 Providing Misc services of manpower with requisite skills including supply of required tools and tackels (which include the minor consumbale material like as oil,screw,greeceetc) for various unmeaurable and unforssenas per site. 327 Skilled jobs 328 Un-skilled jobs
