|
| 1 | SSDA |
| 2 | Dist.wiring in 22/0.3 (1.5 sqmm) single core standred \"FR\" PVC insulated & unsheathed single core standred copper wire (brand approved by EIC) in 19 mm bore , 3mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with modular type switch (brand approved by EIC) fixed on modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3(Ph. & N) and 1x22/0.3 as ECC (a) Average Run 8 mtr (PWD Sch. 2017) [E-20/G/1(III)] |
| 3 | (b) Avg run 9 mtr (PWD Sch. 2017) [E-20/G/1(IV)] |
| 4 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular typeplug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board(PWD Sch. 2017) [E-20/G/3(i)] |
| 5 | Supplying and drawing 1.1KV single core standred \"FR\" PVC insulated & unsheathed single core standred copperwire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy . Connection as required 3x(1.5 sqmm) [ 1(s) / E-9 ] |
| 6 | (ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC[E-9/C(1-E)] |
| 7 | (iii) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC[E-9/C(v)] |
| 8 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 2.5 sq.mm [9(i)/F-5] |
| 9 | 4 sq.mm [9(i)/F-5] |
| 10 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes(in mm ) flushed in wallas per GS200x 150x 65[11(c)/E-4] |
| 11 | Supplying & Fixing bakelite/perspex cover on existing inspection board by brass screws. 200 x 150x 65 [13(d)/E-4] |
| 12 | Supplying and laying 19mm heavy gauge Polythene Pipe [PWD Sch. 2017/ 51)/K-2] |
| 13 | Cutting Channel of required sizeon masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pip of following diameteras per GS. 19 mm dia 3 mm thick [ 6 (a)/ E- 3 ] |
| 14 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), with 16 A moduler type switch , without plug top on 4 module GI moduler type switch board with top cover plate flushed in wall including S&F switch board and cover plate and making necessary connections with PVC Cu wire and earth continuity wire etc (3 nos Geyser +1nos Refrigerator ) Page E-18(9-b) |
| 15 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall aftercutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+6 Way Enclosure, Crabtree (PWD Sch. 2017, Item no. 13 at page-D-10) |
| 16 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.a) 6-32A SPlegrand(PWD Sch.2017 Item No-7 at page D-6) |
| 17 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS [Make- legrand ] 32 A DP [ (PWD Sch.2017) 7 / D- 6 ] |
| 18 | Supplying and fixing Sheet steel Main Switches on flat iron frame on wall 240V DP with fuse on L&N 32A, with iron frame HavellsPWD Sch. 2017/ Page-D-1[1-a] |
| 19 | Supplying and fixing double door vertical TPN MCB Distribution Board for MCCB incomer with IP 42/43 protection on angle iron frame on wall and mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 12Way- 250Alegrand(PWD Sch.2017 Item No-15 at page D-11) |
| 20 | Supplying and fixing 415 V Four Pole MCCB OF Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic /adjustable thermal and fixed magnetic setting in existing DBs/enclosure and necessary connection[Make-Legrand ] 160 A PWD - [ 10 / D- 8] |
| 21 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand ]63 A FP PWD - [ 6 / D- 5 ] |
| 22 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long and 1x 4 SWG GI (Hot dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts , double washers incl. S& F 15 mm dia GI pipe protection (1 mts long) to be filled with bitumin partly under the ground level and partly above ground level driven to an averag edepth of 3.65 mts. below the ground level byISI-Medium GI pipe as per GS.PWD Sch.2017 -[ 2(a)/G-1] |
| 23 | Excavation of soil for installation of Earth Electrode and filling & ramming as per GS For morrum SoilPWD -[1(a)/G-1 ] |
| 24 | Extra treatment of soil by using salt & charcoal or coke for plate electrode with epsome saltPWD -[ 3(b)/G-2] |
| 25 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required PWD - [4(a)/G-2] |
| 26 | Connecting the equipments body to earth busbar including S&F GI(Hot Dip) wire of 7/14 SWG sizeas below on wall/floor with staples buried inside wall/floor as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. as required and mending good damages. PWD - [5(b-1)/G-2] |
| 27 | Supply of 1.1 KV grade 4 Core XLPEInsulated & Sheathed Armoured Aluminium Conductor cables with PVC outer sheathed control/power cable confirming to IS : 7098(Part -1)/1554 (part-1) 1988 for Working Voltage up to 1100 Volts of following sizes 4 Core 70 sqmm [ Make Gloster/kei Cable/Mescab] |
| 28 | Laying of one No. cable above 35 sqmm andupto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed PWD Sch. 2017 - [ 1(b)/ F- 2 ] (For 4 Core 70 sqmm) |
| 29 | Supplying and fixing compression type gland and finishing thoseforfollowing XLPE / PVC armoured cable (2/4 / 3.5)Core with 10 SWD GI wire as per GS. 4 Core 70 sqmmPWD Sch. 2017 -[7(c)/F4] |
| 30 | Finishning the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes , anticorrosive paste & jointing materials.PWD Sch. 2017 - [8(b)(xiv)/F5] |
| 31 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. (PWD-P-D13- Item no.22) |
| 32 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991 PWD Sch. 2017 - [19(b)/D13] 4 bars, 4 x 50x5mm 500x150mm (Dimension of cu. bars 85mm long) -315A |
| 33 | Add GST 18 % |
| 34 | Add CESS 1 % |
