Tender For Work Of Building Construction Repair / Etc At Blanket Production Centre , Mirapur. - Earthwork in excavation by mechnical means (Hydraulic excavator)/manual means in foundation trenches or drains, excavated soil and disposal of surplus excavated soil as directed by Engr. Incharge within a lead of 50 m including dressing of sides and ramming of bottoms, lift upto 1.5 m DSR 2.8.1 2 Providing and laying cement concrete 8:4:1 [Stone ballast 8 (40mm normal size) : 4 sand : 1 cement] and curing etc all complete. As per S.I NO 4.1.8 3 Centering and shuttering including strutting, propping etc. and removal for foundation , footing ….etc DSR 5.9.1 4 RCC with 1:1.5:3 with cement, coarse sand and 20mm stone grit in foundation & footing including all materials, labours, T&P etc all complete. DSR 5.1.2 5 Centering and shuttering including strutting, propping etc. and removal for plinth beam ….etc DSR 5.9.6 6 RCC with 1:1.5:3 with cement, coarse sand and 20mm stone grit in Column including all materials, labours, T&P etc all complete DSR 5.2.2 7 Centering and shuttering including strutting, propping etc. and removal for plinth beam ….etc DSR 5.9.5 8 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 Steel reinforcement for R.C.C. work including straightening, cutting. bending, placing in position and binding all complete upto plinth level.. DSR 5.22.1 10 Brick work with common burnt clay modular bricks of class designation 7.5 in Cement mortar 1:4 (1 cement: 4 coarse san foundation and plinth in: DSR 6.2.1 11 Brick work with common burnt clay modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse san DSR 6.4.1 12 12 mm plaster of mix 1:4 (coarse 12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand. DSR 13.4.1 13 15 mm thick cement plaster in single coat of rough side wall with 1 :4 cement & coarse sand including all labours, materials, T&P etc all complete. (PWD SI No.13.8.2. 14 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate (DSR11.3.1) 15 P/L Glazed 8 to 10 mm thick ivory or light shade vetrified tiles 600 mm x 600 mm size flooring or skerting laid 1:3 complete item S.I.. no.11.46.2 16 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.DSR 10.1 17 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. DSR9.5.1.1 18 Providing and fixing of 5mm thick glass panes with putty etc all complete. DSR 9.7.7.2 19 Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete. DSR 13.26 20 Finishing walls with Acrylic Smooth exterior paint of required shade DSR 13.46.1 21 Distenpering with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as berger j and n shalimar,asia paints after thoroghly brushing the surface materials and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials labour,t&p one coat extra etc.DSR 13.41.1 22 Providing and fixing of following dia U-PVC pipeType-B Supreme class ISI marked pipe lines : 23 Provinding and fixing 1st quality ceramic glazed wall tiles conforming to is:15622 (thickness to be specified by the manfacturee) of approved make,in all colour shades except burgundy,bottle black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 and jointing with grey slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.PWD/DSR 8.31 24 Provinding and fixing 1st quality ceramic glazed floor tiles of size 300 x 300 mm conforming to is:15622 (thickness to be specified by the manfacturee) of approved make,in all colour shades except white,ivory,grey fume red brown laidon20 mm thick bed of cement mortar 1:4 and jointing with grey slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.PWD/DSR 11.38 25 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (Exposed in wall) (DSR 18.9.3) 26 25mm nominal outer dia pipe 27 40 mm nominal outer dia pipe 28 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. : Concealed work, including cutting chases and making good the walls etc. (DSR 18.8.1) 29 15mm Nominal outer dia pipes 30 Providing and fixing of following dia U-PVC pipeType-B Supreme class ISI marked pipe lines :12.41.2 31 110mm dia 32 Providing and fixing SWR PVC plain bend of required degree.12.45.5.2 33 Providing and fixingwash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, includingpainting of fittings and brackets cutting and makinggood thewalls wherever require: White Vitreous China Wash basin size 450X 300 mm with a pair of 15 mmC.P. 34 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17.1) 35 25 mm nominal bore 36 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15mm nominal bore (DSR 18.21.2.1) 37 15 mm nominal bore 38 Provinding and fixing white vitreous china water closet squating pan (Indian Type) 39 Orissa pattern W.C.pan of size 580 x 440 mm 17.13.2 40 Provinding and fixing P.V.C Low level flushing cisten with manually controlled device (Handle lever ) conforming to is 7231 with all fitting and fixtures complete. 10 litre capacity white DSR 17.19.1 41 Providing and fixingCP BRASS bib cock of approved quality DSR 18.51.1 42 Provinding and fixing c.p brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal size DSR/PWD 18.53.1 43 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 450x450 mm (DSR : 17.32.2) 44 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter (DSR : 19.21.1) 45 Providing and placing on trence polyethylene water storage tank ISI:12701 marked indicating the BIS License NO With Cover and sutable locking ............complete item.dsr 18.4 46 E/W in cutting or in embankment in ordinary soil by cartage upto 5km DSR 2.25A 47 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with C.L. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: 48 Electrification work 49 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 50 group c 51 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 52 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 53 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 54 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required 56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 57 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. (for A.C. Point/MCB Point) 58 Supplying and fixing following 8 way, SPN Dustribution Box sheet steel, MCB distribution board, on surface/ recess, complete 59 6 way SPN , Double door 60 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 61 Single pole 62 Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A 63 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 64 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 65 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 66 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. 67 100 mm dia 68 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 69 Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA 70 Supplying and laying ofaluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed bythe Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size 71 size 10 sq mm x 4core 72 Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. 73 S/F of changeover switch on angle iron frame 100 Amp 4 pole … complete. Sch. No. 378 74 Supply and Erection of 100 amp TPN tap off box on rising mains complete with HRC fuses etc. complete in all respect (sch. Nos.. 914) 75 Less 5% Department Charge
