Misc. Civil Maintenance At Different Areas Under Dam Division, Dvc, Maithon; 1 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar Cum 15.000 1,489.20 22338.00 2 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 280.000 39.50 11060.00 3 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Each 30.000 265.41 7962.30 4 15.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 5.000 1,759.83 8799.15 5 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Cum 1.000 2,567.36 2567.36 6 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Cum 20.000 191.67 3833.40 7 11.N.1.2.1 One brick flat soling including ramming and dressing bed to proper level and filling joints with sand with class designation 50 bricks. Sqm 80.000 362.16 28972.80 8 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Sqm 30.000 291.19 8735.70 9 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 10.000 5,991.53 59915.30 10 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 15.000 6,457.76 96866.40 11 6.N.1.2 Brick work with bricks of class designation 50 in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 coarse sand ). Cum 15.000 5,542.38 83135.70 12 6.N.1.2+6. N.7 Brick work with bricks of class designation 50 in superstructure in cement mortar 1:6 ( 1 cement : 6 coarse sand ). Cum 10.000 6,971.66 69716.60 13 6.N.3.2 Half brick masonry with bricks of class designation 50 in foundation and plinth in cement mortar 1:4 ( 1 cement : 4 coarse sand ). Sqm 50.000 700.83 35041.50 14 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) Cum 2.000 7,333.73 14667.46 15 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe500D or more. Kilo- gram 160.000 78.61 12577.60 16 11.41A.1.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm Sqm 25.000 1,128.09 28202.25 17 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. sqm 10.000 820.33 8203.30 18 13.1.1 12 mm cement plaster of mix 1:4 ( 1 cement : 4 fine sand ). Sqm 200.000 258.52 51704.00 19 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement : 6 fine sand ). Sqm 150.000 284.35 42652.50 20 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix 1 : 4 ( 1 cement : 4 fine sand ). Sqm 120.000 316.79 38014.80 21 13.16.1 6 mm cement plaster of mix 1 : 3 ( 1 cement : 3 fine sand ). Sqm 30.000 221.87 6656.10 22 11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate Sqm 150.000 477.86 71679.00 23 9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood. Cum 0.500 93,573.06 46786.53 24 15.14.1 Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 square centimetres and above cum 0.500 3,221.80 1610.90 25 9.5.1.2 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 30 mm thick shutters Sqm 15.000 2,946.66 44199.90 26 9.7.1 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood Sqm 15.000 2,628.91 39433.65 27 9.N.25.1 Easing of Door & Window shutter for smooth functioning including minor repairing complete. Door shutter of all Sizes Each 50.000 271.24 13562.00 28 9.N.25.2 Easing of Door & Window shutter for smooth functioning including minor repairing complete. Window Shutter of all size Each 40.000 135.64 5425.60 29 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg. 250.000 124.77 31192.50 30 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg. 240.000 158.70 38088.00 31 10.5.2 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece Sqm 15.000 4,046.78 60701.70 32 14.5.1 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) Sqm 20.000 825.90 16518.00 33 9.N.18 Supplying and fixing Chromium plated sliding door bolt(aldrop) (300x16)mm size in position, including nuts & bolts, screws complete. Each 12.000 199.95 2399.40 34 9.66.2 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378) 100 mm Each 12.000 24.77 297.24 35 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter metre 80.000 280.36 22428.80 36 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.3.2 a) Single tee with door 110x110x110 mm Each 6.000 180.14 1080.84 12.42.5.2 b) Bend 87.5° 110 mm bend Each 12.000 115.74 1388.88 12.42.6.2 c) Shoe (Plain) 110 mm Shoe Each 6.000 101.66 609.96 .... more in document
