Tender For Electrical Work For Proposed Construction Of 32 Beded Hostel/Barrack For Naxal Q.R.T. In Distt. Varanasi - Wiring for light point / fan point / exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR No-1.10.3 2 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR No-1.11 3 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR No.-1.31 4 Supply and fixing of suitable size of GI boxalong with modular base& cover plate for modular switched in recess etc 3 module, DSR No-1.27.2 5 Supply and fixing of suitable size of GI boxalong with modular base& cover plate for modular switched in recessincluding provided and fixing 6 pin 5/6 Amp modular socket outlet and 15/16Amp Modular switch connection etc as required etcDSR No-1.32 6 Supply and fixing ofmodular blankingplate ,on the existing modular plate and switch box as required switch box, including connection but excluding modular plate & switch box as requiredDSR No-1.26 7 Supply and fixing of LED Bulb 9 Watt (Rate Analysis) 8 Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface 100 lm/watt with, P.F>0.95. THD<10% at full load, CRI>80, sheet thikness 0.8 mm complete in all respect. CAT AAA S.No.-23.07(SOR 44 circle E/M) 9 Supply and fixing of IP 20 fron light mid powerSMD typeLED Light recess/ surface mountingRound LED light 10 to 15Watt cut outmin 125 mm height min 40mm LED down lighter havingpowder coated die castingaluminium housing with heat sinkhigh purity / tranmissive uv stablized non yellow with diffuser / reflector for uniformlight distribution detachabledriver set suitable for 24 hr contionious operationcomplete in all respect 1200-1800 system lumen ,>110 lm/ W P.F>0.95. THD<10% at full load, CRI>80,over voltage protection with 5 year warranty S.No.- 23.02(SOR 44 circle E/M) 10 Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass/ UV stablized PC cover and lenses suitable for 75 watt to 90watt and confirming to IP 66 and 1K07 and above protection having company LOGO engraved complete in all respect9000-10800 system lumen ,>110 lm/ W P.F>0.95. THD<10% at full load, CRI>70, potted driver set in metal housing ( not circuilatory ) pha eto phase protection at 440V &, >300 V auto cut and restart feature with 5 year warrantyS.No. 23.16(SOR 44 circle E/M) 11 Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire having pressure die casting housing with driver set confirming to IP65 and above protection 1K 08 high purity / transmisivity UV stablized non yellow diffuser / for uniform light distribution detachable driver set open and short circuit protection , suitable for 24 hrs continious operation complete in all respectwith driver set confirming to IP 65 and above Protection complete in all respect. 1200 system lumen ,>120 lm/ W P.F>0.95. THD<10% at full load, CRI>70,over voltage protectionwith 5 year warranty, S.No.- 23.11(SOR 44 circle E/M) 12 Supply and fixing of Mirror light 11 W (Rate Analysis) 13 Providing fixing of circular / Hexagonal cast iron or MS sheet box for celing fan clamp of internal dia 140mm ,73mm height top lid 1.5mm thick MS sheet with its top surface hacked for proper bonding , top lid shall be screwed into he cast iron / MS sheet box by means of 3.3mm dia round headed srewed one lock at corneras per requiredS.No.-2023-10.18 14 SITC of 1200 mm sweep .BEE standard 5 star Rated Ceiling fan with BLDC motor Class of insulationB , 3 nos Blade 30 Cmlong down rod2 nos canopy shacklekit etc safety rope , copper winding , PF not less thenm 0.9Air diliveruy min 210 Cu / min , 350 rpm (as per IS 374-2019), thd less than 10% remote or electonic control unit for speed control and all required acceroriessuitable for 230V ,50Hz single phaseetcDSR.19.1 15 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. DSR.1.45 16 S/F of fresh air fan 300 mm230Volt 50HZ (GeM) 17 Installation of Ex fan ( Fresh air fan ) in the existing opening including making good the damage connection ,testing ,commissioning etc as requiredDSR.150 18 Extra for fixing of Louvers/ shutters completed with frame for ex fanDSR 1.51 19 Supply and fixing surface/ flush mountingof 4 way VTPN DB with additional doorwithout DPx 3 160 MCCB complete in all respectDSR 2.5.1 20 S&F of 100 Amp 4 pole MCCB(30 KA) Thermal Magnetic release (C) cat ADSR 2.2.13 21 Supply and fixing of following way single pole and neutral, sheet steel MCB distribution board 240V, on surface / recess complete with tinned copper bus bar , earth bar, DIN barinterconnection, powder painted including earthing etc as required ( But without MCB / RCCb / Isolators)--6 way Doble door DSR 2.3.1 22 Supply and fixing of following waysingle pole and neutral , sheet steel MCB distribution board 240V, on surface / recess completewith tinnedcopper bus bar , earth bar , DIN barinterconnection , powder painted including earthing etc as required ( But without MC / RCCb / Isolators)---8 way Doble doorDSR 2.3.2 23 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Doublepole DSR 2.10.3 24 Supplying and fixing 63A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Doublepole (Rate Analysis) 25 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole DSR 2.10.1 26 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Tripplepole DSR 2.10.4 27 Supplying and fixing 63A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Tripplepole (Rate Analysis) 28 S&F of 100 Amp. four pole change over switch on 40mm x 40mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.(Rate Analysis) 29 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.Incomming - 200Amp 4 pole MCCB , Outgoing2nos 100Amp MCCB 4 pole S.No. 22.1.2(SOR 44 circle E/M) 30 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVCconduit as required.1 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire DSR 1.14.1 31 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR 1.14.2 32 2 X 4 sq. mm + 1 X 4 sq. mm earth wireDSR 1.14.3 33 2 x 6 sq. mm + 1 X 6 sq. mm earth wire DSR 1.14.4 34 2 x 10 sq. mm + 1 X 6 sq. mm earth wireDSR 1.14.5 35 4 x 10 sq. mm + 2 x 6 sq. mm earth wireDSR 1.14.10 36 4 x 16 sq. mm + 2 x 16 sq. mm earth wireDSR 1.14.11 37 Supplyandlayingofaluminium conductorPVCinsulatedarmouredservedsheathedcables1100Volts gradeatadepthof750mmbelowgroundlevelovera cushionof75mm.thicksandallaroundandprotected with burnt bricks on sides and on top. On surface the cable runshallbefixedonM.S.clampsetc.ofsuitablesizeor as directedby the Engineer-Incharge, complete in all respect.Thearmouringofthecableshallbeproperly connected with the earth conductor by clamps etc Size-.95 sq. mm 3-1/2 core S.No. 20a.1.14(SOR 44 circle E/M) 38 Supplyandfixingofbrassnickleplatedcompression glandforPVCinsulated&armouredservedsheathed, undergroundcableincludingrubberringetc.completein allrespect.Thearmouringofthecableshallbeproperly connectedwiththeearthasperdirectionofEngineer-Incharge. Size- 95 sq. mm 3-1/2 core (Make - Havells/Anchor/Dowells) DSR 2124 39 Supplyandfixingofplainorpintypecoppertinplated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete inall respect as per direction of the Engineer-Incharg Size 95 Sqmm (Make - Dowells orequivalent) DSR 2208 40 Supplyandburringof GI earth plate600mm x 600mm x 6mm thick including accessoriesand providing masonary enclosure with cover platehaving locking arrangement and watering pipe of 2.7mtr long etc with required material etc DSR 5.4 41 S/L of 6 SWG GI wire at .50 mtr below ground level for conductor earth electrode, i/c connection / termination with GI timble etc. as required.DSR 5.7 42 Supplyandlayingof 25mmx5mmG.I.stripfromearth electrodedirectlyinthegroundasrequiredcompletein all respect. DSR 5.15 43 Proving and fixing of Lightining conductor finial made of 25mm dia 300mm long , GI tube , having single prong at top with 85 mm dia 6 mm thick GI base plate including holes etc complete as requiredDSR 6.2 44 Jointing GI tape (with another GI tape base of the finial or any metallic object)by revetting / nut bolting/ seating and soldering etc DSR 6.4 45 Providing FixingGI tape 20x3mm thick on parapet or surface of wall for Lightining conductor complete as required (for Horizental run ) DSR 6.7 46 Providing FixingGI tape 20x3mm thick on parapet or surface of wall for Lightining conductor complete as required (for Vertical run ) DSR 6.8 47 Providing and fixing testing joint made of 20mm x3mm thick GI stip 125 mm long with 4 nos GI bolt , Nuts, Chuck nuts and spring washer etc complete as requireDSR 6.12 48 Supply and fixing of C02 type fire extinguisher 6.5.5g. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. (Rate Analysis) 49 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. (Rate Analysis) 50 GST @18%
