Tender For Special Repair To Bldg No Eb 41 And Eb 42 At Mcte Under Ge Mcte Mhow; 1 Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tilescomplete all as specified and directed. 2 M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 3 Ditto All as per Item No.02, above but on verticalsurfaces such as skirtingincluding 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. 4 M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 5 M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified anddirected. 6 Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land. 7 M & L forMachine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 8 M & L forMachine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 9 Ditto All as per Item No.08, above,but on verticalsurfaces such as skirtingincluding 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. 10 M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 11 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, window cill and jamb and other similar situations complete all as specified and directed. 12 Takingdown chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed. 13 Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premisescomplete all as specified and directed. 14 Taking down Shutters of any descriptionexc . 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed. 15 S&F Pressed steel frames for doors size 165x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. 16 S&F Pressed steel frames for doors size 105x60 mm with one rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. 17 M & L PCC 1:2:4 type B-0 (using 12.5 mm graded) stone aggregate for filling in pressed steel door framed complete all as specified and directed. 18 S & F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 30 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headedSS screws having minimum frame density of 650 kg/cum , screw withdrawal strenght of 1800 N (Face) & 900 N (Edge) , minimum compressive strenght of 50 N/mm sqr , modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. (Note stainless steel butt hinges and necessary scews shall be paid seperately . 19 S & F 35 mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side), supplied and fitted to chowkat complete all as specified and directed. 20 S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc sizeof member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed. 21 S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube ,in opening as per specification & drawingcomplete all as specified and directed. 22 S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawingcomplete all as specified and directed. 23 M&L for preparation ofsurface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described, & treated with tar or coal tar black paint complete all as specified and directed. 24 S&F mild steel hold fasts, plain angle cleats for securing purlins ,and similar small articles conforming to Fe 290gde E 165 complete all as specified and directed. 25 S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 26 S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. 27 S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. 28 S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 29 S&F100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. 30 S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. 31 S&F 100mm size extruded aluminium alloy handles, fabricatedtype complete all as specified and directed. 32 S & Fdoor stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc complete all as specified and directed. 33 S&F in repairs 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 34 M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 35 M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed. 36 S&F in repair 25 mm bore SS Pipecurtain rods including SS Brackets & SS Decorative dome, suitablefor door/widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each endandfixed to wallincl. removal of existing rod and making good etc complete all as specified and directed. 37 S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed. 38 Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain clear glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expandingscrewscomplete all as specified and directed. 39 Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steelcolour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws complete all as specified and directed. 40 S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl bracketsand flushing pipe fixed in repairs complete all as specified and directed. 41 S&F in repair 600x450mm size and 6mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws, complete all as specified and directed 42 S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed . 43 S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed. 44 S&F in repairs vitreous china,white, wash hand basin, with pedestal flat back size 550x400mm including MS brackets including cutting for and pinning in,including waste pipe complete all as specified and directed. 45 S&F in repair 20mm bore brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed. 46 S & F in repairs 32/40 mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc complete all as specified and directed. 47 S&F Grating 100 mm bore of CP with or without hole complete all as specified and directed. 48 S&F in repair 15 mm bore bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrulecomplete all as specified and directed. 49 S&F in repair chromium plated brass Sink mixer waste system complete screwd down for 15 mm bore GI pipe complete all as specifed and directed. 50 S&F in repair 15 mm bore bib tap swan neck cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed . 51 S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed . 52 S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed. 53 S & F in repairs Stop/angle cock 15 mm bore cast copper alloyfancy type chromium platedscrewed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. 54 S & F in repairs two way Stop/angle cock 15 mm bore cast copper alloy fancy type chromium platedscrewed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. 55 S&F in repairs Health Faucet ABS with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed . 56 S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern) complete all as specfied and directed. 57 S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. 58 S & F in repairs 8 mm Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Rangepremium quality complete all as specifed and directed. 59 S & F in reparis Stainless Steel Wall Mount Soap Casefixed to wall complete all as specified and directed. 60 S&F Brass Bottle Trap 300 mm (12) Designer wall connection pipes and wall flange complete all as specified and diretced. 61 S & F in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom,connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed. 62 S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittingsand wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. 63 S&F stainless steel plate racks of size 900mmx600mmx250mm and thickness of SS strip 1mm,fixed on walletc complete all as specified & directed. Make : Nirali or equivalent of as approved by GE/Engineer-in-Charge. 64 Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed 65 S&F, laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing includingall fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. 66 M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specified and directed. 67 Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. 68 S&F, laying and testing for 20 mm bore GI tubing medium grade galvanised steel tubing includingall fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. 69 Dismantling of PVC water tanks 500 litres capacity complete all as specified and directed. 70 S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. 71 Taking downcement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed. 72 M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6as per manufacturers instruction, finished fair and even without using extracement complete all as specified and directed. 73 M & L for prepration of new wall interior surfaces & applyingbirla / J. K. wall care whiteputty 2 mm thick for levelling the surfaces and applying two coat of interior emulsion distemper over a coat of wallprimer incl. preparation of surfaces ofwalls etc complete all as specified and directed.(any height of bldg). 74 M&L for Rendering 15 mm thick on fair faces of concrete/brick exterior surfaces incement mortar 1:4,in two coats (10mm thick backing coat+5mm thick finishing coat) finished even and smooth with out using extra cement including mixing of integral water proofing compound in 5mm thick finishing coat etc complete all as specified and directed.(Note:-WPC will be measured seperately) 75 M & L for preparation of surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over a coat of 2 mm putty over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. ® 15014B Providing and applying plaster of paris complete all as specified and directed. 76 Supply only integral water proofing compound complete all as specified and directed. 77 M&L for preparation of old steel surface and applying two coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth etc complete all as specified and directed. 78 S&F 18 mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as specified and directed as per manufacturers specification . 79 S & Ffactory made PVC shelf/partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc complete all as specified and directed. 80 S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge complete all as specified and directed 81 S&F40 mm bore, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised completeall as specified and directed. 82 S&F self closing stainless steel hingescompleteall as specified and directed. 83 S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed . 84 S&F in repair Ball valves 15 mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. 85 S&F in repairPVC (SWR) pipe 110 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed. 86 S&F in repair 110 mm bore PVC(SWR) pipes single soketed in any length with adhesivejoint fixed to floor or trenches including fittings complete all as specified and directed. 87 Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed. 88 S&F in repairsPVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified and directed. 89 S&F in repairs PVC floor trap, with grating75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) ,and including waterleak proor treatment complete all as specified and directed. 90 S&F 75 mm bore PVC (SWR) Bends (any radius ), diminishing pieces or tapers,complete all as spcified and directed. 91 S&F 110 mm borePVC (SWR) Bends (any radius ), diminishing pieces or tapers,directed. 92 Demolition of cement concrete unreinforced in ground floor & paving n.exc 15cm thicknessand removal of debris from site complete all as specified and directed. 93 Surface excavation n. exc. 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil etc complete all as specified and directed. 94 M&L broken stone or bounders hardcore of gauge n exc. 63 mm , deposited, spread and levelled in layers n exc. 15 cm thick , watered and rammed to a floor/true surface complete all as specified and directed. 95 M & L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for in foundations, filling and mass concrete etc complete all as specified and directed. 96 M&L for 50mm thick sand cushiningunder floors or in foundations including watering and consolidation complete all as specified and directed. 97 M&L for machine pressed precast concrete interlocing paver block with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness, M-35 grade laid dry in floor/path complete all as specified and directed. 98 M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 99 M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40 mm gradedstone aggregate) as in plinth protection finished even and fair incl cutting joints andfilling with bitumen and sand mixture complete all as specified and directed. 100 Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil complete all as specified and directed. 101 M & L for cement concrete 1:4:8 type D-2 (using 40mm graded stoneaggregated)in foundation, filling and mass concrete complete all as specified and directed. 102 Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed. 103 M &L for Brickwork with subclass Bbricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6complete all as specified and directed. 104 M & L stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in Cement -mortor 1 : 6 complete all as specified and directed. 105 M &L for Brickwork with subclass Bbricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. 106 Use and wast of form work to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and directed. 107 M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed. 108 M&L mild steel TMT Bars 6mm dia to 10mm dia length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed. 109 Demolition of reinforced cement concrete (reincorcement cut as required to facilitate demolition) of any description and in any position not otherwise complete all as specified and directed. 110 M&L RCC nominal mix Type A- 1, 1: 1.5: 3using20 mm graded stone aggregate ) for slabs supported on walls, beams and column in floors, roofs , alndings, blaconies , canopies , deck slabs ,and in shelves and the like etc complete all as specified and directed. 111 M & L 75 mm thick PCC type B-2 1:2:4 (using 40mm graded stone aggt) in top layer of floor to be finished even and smooth with using extra cement complete all as specified and directed. 112 M & L for cement concrete type C-2, 1:3:6 mix (using 20 mm graded stone aggregate) in bed blocks, coping etc; including necessary formwork complete all as specified and directed. 113 M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering and roolled with 8 to 10 tonnes vibrator power roller to camber gradient required including watering and well ramming complete all as specified and directed. 114 M&L for Preparation of new plastered surfaces and applying one coats of cement base paint on walls complete all as specified anddirected. 115 Returning fillng in , including spreading , levelling , watering and well ramming in layers not exc 25cm complete all as specified and directed. 116 Removing excavated material exc 50m but n exc 250m away from MoD Land form the starting point complete all as specified and directed. 117 Providing pre cast reinforced concrete type B-1, 1:2:4 mix (using 20 mm graded stone aggregate) forcover slab, set in CM 1:4 including necessary form work complete all as specified and directed. 118 M&L for Rolled mild steel injoist, channel, angle, or tee sections, fixed independently without connecting plates, etc.Fe-410-W(Gde-E-250) Quality A etc complete all as specified and directed. 119 M&L RCC pipe 300 mm dia .class NP-2 one coller per length of pipe complete all as specified and directed. 120 Providing plain cement concrete type C-2, 1:3:6 mix (using 20 mm graded stone aggregate) as in bed to drain pipes of 300 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. 121 Extra for forming fair finished to channel or drain 30 cm inner girth in cement concrete using extra cement including mitred/stopped ends, frames mould etc; complete all as specified and directed. 122 Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings including Nainital or similar pattern Roof coveringcomplete all as specified and directed. 123 S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. 124 M&L for Roof trusses ( framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410 -W (Gde E- 250) quality Aetc. complete all as specified and directed. 125 M&L for rolled section/hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and runningrails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting ,connecting to gusset plate etc complete all as specified and directed. 126 Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs etc complete all as specified and directed. 127 Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall.The abovegrid is suspended at every 1200 mm c/c in both directions using 3.0mmthick pre-straightened GI wire. laying 595x595x6 mm thick E-Board Designer ceiling fixing 600mmx 60mm x 6mm grid( Frame work) etc complete all as specified and directed. 128 M&L for 10 mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete all as specified and directed. 129 M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm . The height of the roof may upto 9 m comprising with following items complete all as specified and directed:-(i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.(ii)Oil based Bitumenprimer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.(III) Applyingone coat of hot blownbitumen of 85/25 grade @ 1.20 kg/Sqm.(IV) Laying of water proofingAPP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and lapsas per manufacture instruction etc.(V) Applyingone coat of hot blownbitumen of 85/25 grade @ 1.20 kg/Sqm.(VI)Applying two coats of bituminous aluminium paint @ 200 gram/ sqm (minimum). 130 Taking down carefully copper/alluminium point wiring (light, fan, sockets or power ) complete including all fitings and fixtures such as switches,sockets, ceiling roses, pendens, rgulators, light fittings etc, removing matrials to store fortaking credit and making good disturbed surfaces complete all as specified and directed. 131 Taking down carefully copper/aluminium sub-main wiring any type and making good the disturbed surface ofwalls and floors etccomplete all as specified and directed. 132 M & L for Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cablein and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete,includingone continuity earth wire ofPVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLSH copper conductor connected to all fittings,common earth and connected to earth dollyincluding modular flush boxwith earth dolly duly , covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable sizeall fittings and accessoriesandmaking good disturbed surface of walls and floors etc. complete all as specified and directed for the following:-Note:- Make of modular GI flush box should be same with switch/socket. (a) One light / fan /bell controlled by one, one way switch 5/6 Amps 133 Ditto All as per item No 132 Above but One 3 pin, 5/6 amps socket outlet point on independent boardcontrolled by one, one way 5/6 amps switch 134 Ditto All as per item No 132 Above but One 3 pin, 5/6 amps socket outlet point on same boardcontrolled by one, one way 5/6 amps switch 135 M & L for Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cablein and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked completeincluding one continuity earth wire ofPVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings,common earth and connected to earth dollyfor one three pin 15/16 amps socket out-let point on an independent board including modular flush boxwith earth dolly duly , covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable sizeandmaking good disturbed surface of walls and floors etc. complete all as specified and directedNOTE:- Make of GI flush box should be same with switch/socket 136 S&Ffor Ceiling rose, surface bakelite withthree terminals ISI marked, AC, 50 HZ, 230V complete all as specified and directed. 137 S&F modular switch1 way 6 A , 1 modulecomplete all as specified and directed. 138 S&Fmodular socket 6 Amps 2/3 pin combined2 module complete all as specified and directed. 139 S&F switch modular type 16 A, 1 module complete all as specified and directed. 140 S&Fsocketmodular type multipurposes 6/16 A, 2 module complete all as specified and directed. 141 S & F bell push flush type, 5 amp complete all as specified and directed. 142 S&Flamp holder insulated body with back plate for batten fittings complete all as specified and directed. 143 S&F Buzzer Ding Dong AC 230 Volts Single polecomplete all as specified and directed. 144 Supply and fixing Inverter LED batten 20 watt with squre profile and polycarbonate channel . Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours.with extrudedenvironmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connectedaccessories incl taking down old unsv complete all as specified and directed. 145 Supply and fixing 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connectedaccessories and taking down old unsv light complete all as specified and directed. 146 S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size incl taking down old unsv complete all as specified and directed. 147 S & F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete includingnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, boltscomplete all as specified and directed. 148 S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 9/10 watts incl taking down old unsv complete all as specified anddirected. 149 Supply and fixLED inverter bulb of 9 watt, Of base B-22, lm 700, col tamp 6500 K suitable for fixing in lamp holdercomplete all as specified and directed. 150 Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and refixing the same carefully on the wooden board of suitable size after compltion of B&R Work complete all as specified anddirected. 151 Supply and Fixin repairs flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09with metal doubledoor with 200 Amps rated copper busbar with 2 neutralbar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing withprovision of space for 125 ampsMCCB as incomer and SP/SPN/TP MCBs as out going, 6 way (Optium 1+18 Module) incl taking down old unsv complete all as specified and directed. 152 S&F MCCB 4 pole, 415 volts, in the existing panel / location and connection with using aluminum lugs complete all as specified and directed for100 Amps Adjustable typewith breaking capacity 36 KAcomplete all as specified and directed by Engr-in-Charge. 153 Supply and fixing amp rating 240V, 10KA C curveminiature circuit breaker (MCB) of 4P63 Ampsand current carrying capacity in the MCB DB complete with connection testing and commissioning 154 S&F MCB DB SPN 8 way double door with 200 Amps rated bus bar ,230 volts, 50 Hzincluding necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc incl taking down old unsv and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 155 Supply and fixing 32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of SPN 32 Ampsand current carrying capacity in the MCB DB complete with connection by using lugs of suitable size, testing and commissioning completeall as specified and directed. 156 Supply and fixing 240V, 10 KA B curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection by using lugs of suitable size,testing and commissioning complete all as specified and directed. 157 M & L sub main wiring with 02 runs of 6 sqmm main wire along with 01 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed(medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed.NOTE:- Two runs of maincopper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. 158 Ditto All as per item No.157, above but with 2 runs of 4 sqmm main wire along with 01 runs of 4 sqmm earth wire. 159 S&Fofceiling fans complete with blades, down rods 15mm/12mmupto two mtr, electronic regulator and remote with battery and complete accessories, 230 V, 50Hz, 1200 mm sweep and rated power 26W(+10%) and rate speed 350 RPM (+ 10%) Min air delivery 210 CFM with service value shall not be less than 8.46 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including writing the MES number with synthetic enamel paint complete all as specified and directed. Note : rate of Fan regulator and remote with battery shall be deemed to be included in the quoted rate 160 Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 200 mm sweep with louver ,white in colour includingcutting of wall and duly connection with copper wire from ceiling rose etc and writting the MES Number with synthetic enamel paintwherever necessary and making good disturbed surface, painting to match with existing surfaces complete all as specified and directed. 161 S&Fofexhaust fan , steel body AC single phase230 volt of size 300 mm sweep complete with blade, frame and louversand mesh wire for cover the wall from outside all as specified and directed including making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.complete all as specified and directed. 162 S & F for water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI markedincluding 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & coldconnecton with angle cock including making good of disturbed surface to match with existing colour and writting the MES Number with synthetic enamel paint complete all as specied and as directed 163 S&Fin replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground levelwith top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc completeall as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified. 164 Supply, laying and testing and commisioning cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core laid in pipes, trenches/ducts, on polescomplete all as specified and directed . 165 S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 25 mm dia for telephone and TV connectionsincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed. 166 S & F for Modular type TV Socket out let complete all as specified and as directed. 167 M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with onesingle pole MCB SP 20 Amps complete all as specified and directed. 168 Supply laying and jointing GI pipelight grade 50 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittingscomplete all as specified and directed. 169 Excavation in trenches not exc. 1.5mwide and not exc 1.5m deep in hard/dense soil and getting out complete all as specified and directed. 170 Returning filling in trenches including spreading, leveling,watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. 171 Removingsurplus excavated materialto a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting pointcomplete all as specified and directed. 172 Material and labour for approved river sand cushioning for under ground cable in trenches 8 cm before laying and 15 cm after laying of cable and punned thickness of sand shall be measured and paid for 18 cm only after punned/consolidated thicknesscomplete all as specified and directed. 173 M&L for bricksslightly over burnt (kiln burnt) , modularbricks , best quality, locally available , laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brickfor cable protectioncomplete all as specified and directed.
