Tender For Provision Of Or Living Accommodation At Borarupak Mil Stn Under Ge 872 Ews.; 1 Surface dressing n.exc 15cm deep complete all as directed and specified. 2 Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan and getting out in soft/loose soil complete all as directed. 3 M & L Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified. 4 Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. 5 M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as directed. 6 M&L for Formwork (Rough finished) to sides of pillars,posts, struts, piers, columns and stanchions etc. all complete as directed. 7 M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) Columns, pillars, piers, posts and struts etc complete all as directed 8 M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. complete all as directed. 9 M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as Beams, cantilevers, bressummers,lintels over 1.5m span complete all as directed. 10 Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as directed. 11 M&L RCC 1:2:4 type B-1,(using 20mm graded agg) as in Chajjas all as specified and as directed. 12 M&L for TMT bar 10 mm dia and over cut to length, bend to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in reinforecement complete as specifed 13 M&L for TMT bar 5 mm dia and over upto and including 10 mm diaas in stirrups, spacer and binders and binding with and including mild steel wire (annealed) not less than 0.90 mm dia all as specified and drected. 14 M&L precast cement concrete 1:3:6 type C-1 ( using 20mm graded aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar 1:6 complete as in wallall as specified and as directed. 15 M&L damp proof course 40 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggt) to horizontal or vertical surface including necessary form work complete all as specified and as directed.Note :WPC shall be measured and paid separetely under respective items. 16 M&L rendering 15mm thick in cement mortar 1:4 onany faces of brick work or concrete surfacesincluding finishing the surfaces fair and even by using WPC as per manufacturers instructions complete all as specified and directed. Note :WPC shall be measured and paid separetely under respective items. 17 Supply only integral water proofing compound conforming to IS-2645-2003 complete all as specified and directed. 18 M & L applying two coats of cement based paint over a coat of alkali resistant priming coat on newly plasteredwall surfaces including preparation ofsurfaces, complete all as specified. 19 M&L 10 mm thick rendering in cement mortar 1:6 on brick/ concrete surfaces including finishing the surfaces fair and even complete all as specified and directed. 20 M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of average 1mm thick Birla white putty complete all as specified and directed. 21 M&L for Sand filling under floors or in foundations including watering and consolidation etc complete all as directed. 22 M&Lfor hard core of guage n exc. 63mm, broken stone, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface of all as specified. 23 M&L 100 mm thick cement concrete 1:4:8 type D-2 (40 mm garded aggrgate) as in sub base of floor complete all as specified and as directed. 24 M&L 40 mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate), as in floor complete all as specified and as directed. 25 M&L Non - skid Ceramic Coloured tiles 7 to 8 mm thick (Square/ rectangular)area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm screed in CM 1:6 complete all as specified and directed 26 M&L non-skid ceremic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floors, skirtings etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles including for screed bed (or) bedding layer of cement morter 15 mm thick 1:6 for laying floor finishes complete all as specified and directed. 27 M&L for coloured glazed tiles of size 450X 350X 7mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. 28 M&L 75 mm thickPCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection & finishing the surface even and smooth with out using extra cement complete all as specified and directed. 29 S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified and directed. 30 S&F mild steel rolled sections as in mainand cross beams, hip andjack rafters, purlins where connected to common rafters andrunning rails, fixed with angle cleats or other connecting plates,gusset plates, etc conforming to Gde Fe-410-W (Gde E- 250) quality B complete all as specified & directed. 31 Excavation in post holes (or similar holes) each n exc 0.5 cum getting out in soft soil all as specified and as directed. 32 S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. 33 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. 34 S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge covering/cladding to wall, fixed with self tapping screws as specified and as directed. 35 M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. 36 S&F powder coated aluminium anodised doors, windows, ventilators frame with one or more rebates including joining cleat for fixing etc. complete all as specified 37 S&F Powder coated aluminium anodised window and ventilator shutters, as in multi traktype without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) per leaf complete all as specified 38 S&F of 5.50mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as directed. 39 S&F galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staples completeall as specified and directed. 40 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail.MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all asspecified and directed 41 S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, incl fixing arrangement, suppling & fixingin opening as per specification completeall as specified and directed. 42 S&F aluminium anodized 150mm long barrel tower bolt of extruded section completeall as specified and directed. 43 S & F aluminium handles size 150mm cast type anodised completeall as specified and directed. 44 S&F butt hinges medium weight cold rolld mild steel of 100mm size completeall as specified and directed. 45 S & Faluminium anodised snap grid frame work of size 605mm x 605mm for false ceiling,Hangers with 6mm dia GI (upto 1200mm length) adjusting level fixed to roof including 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed 46 S&F vitreous china Squatting Pan Orrisa pattern 580 x 440mm size pan white with front or back inlet with integral foot rest, incl PVC (SWR) P or S trap 110mm dia & provn of lime concrete bedding complete all as specified and as directed. 47 S&F 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including Flush pipe of polyetylene of low or high density or PVC. 32mm dia, for low level cisterns brackets etc complete all as specified and as directed. 48 S&F PVC connections 15mm size with PTMT nuts of length 450mm long complete. 49 S&F bib taps cast copper alloys with crutch or butterfly handle chromium plated fency type, screwed down screwed for iron pipe of 15 mm bore complete all as specified. 50 S&F chromium plated angle valve suitable for 15mm bore GI tubing. Complete all as specified and directed 51 S&F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets etc including 32mm dia waste coupline complete all as specified and as directed. 52 S&F 32mm Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete for WHB, urinal pots etc. complete all as directed. 53 S&F High density polyethylene pipes (HDPE) 50mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc incl fittings required complete all as specified and as directed 54 S&F PVC (SWR) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings for PVC (SWR) Pipe 75mm bore (dia), jointing with Solvent Cement, complete all as specified and as directed. 55 S&F PVC (SWR) 75mm bore (dia) Junction, Single (Single T) Equal or Unequal with Access Door, etc., jointing with Solvent Cement, complete all as specified and as directed. 56 S&F PVC(SWR) 75mm pipes single socketed ,in length with rubber ring joints laid in trenches complete all as diredtec. 57 S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as directed. 58 S & F pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for union pipe and fixed to 15mm dia pipe all as directed. 59 S & F Brass chromium plated shower rose 125mm size swivel type complete all as directed. 60 S & F in tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges complete all as directed. 61 S&F 650x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. 62 S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete fix to walls, ceiling or laid in floor complete all as specified. 63 All as per Item No 62 above but 20mm dia bore . 64 S&F Gun metal glove or flush cock with iron wheel, screwed both ends for iron pipe 15mm bore complete all as directed. 65 S&F for Rotational moulded polyethylene water storage tanks 1000 ltr cap.(cylindrical vertical with closed top) hoisted and fixed in position incl 20 mm PTMT ball cock complete all as specified 66 Returning filling in including spreeding, leveling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as directed. 67 Removing excavated material to a distance n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. 68 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as directed. 69 M&L 75mm thick PCC 1:2:4 type B-2 plain cementconcrete with using 40 mm graded aggregate as in sub base, complete all as specified and as directed. 70 M L Plain cement concrete 1:3:6 Type C1 using (20mm graded stone aggregate ) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed 71 M&L chequerred tiles 30cm x 30cm x 25mm thick set and jointedand pointed in neat cement slurry in floors by using grey cement and pigments over & including 20mm thick screed bed in CM 1:6 complete all as directed. 72 Excavation over areasn exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed. 73 dittio butexc 1.5m deep n.exc 3.00m deepand getting out in soft/loose soil complete all as specified and directed. 74 M&L PCC 1:3:6 type D-2 (using 40 mm graded stone agg) as in foundation of man holes complete all as specified & directed. 75 M & L rendering 15mm thick on brick wall or concrete surface consisting two layers of 5mm thick in cement mortar 1:4 over 10mm thick in CM (1:4) finished even and smooth with using water proofing compound in 2nd layer complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.) 76 M&L for neeru finish to plastering as specified and as directed. 77 M&L pre cast cement concrete 1:2:4 as in manhole covers type B-1 (using 20 mm graded stone agg) set in cement mortar 1:6 including necessary form workcomplete all as specified and directed. 78 S&F PVC(SWR) 110mm pipes single socketed ,in length with rubber ring joints laid in trenches or in floors complete all as directed. 79 M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed of drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for 110mm dia of pipe complete all as specified and directed. 80 S&F PVC(SWR) 75mm pipes single socketed ,in length with rubber ring joints fitted to wallscomplete all as directed. 81 S&F PVC(SWR) vent cowl 75mm complete. 82 M&L for Point wiring with 1.5 Sq mm copper conductor single core flame retardant PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC caping and casing surfacetype andaccessories of suitable size ISI marked and pressed steel terminal boxes of 2 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement incl provision of 3 mm thick laminated hylem sheet for mounting the switches/sockets/regulators/ceiling rose etc including running up of 1.5 Sq mm copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for One light/ceiling fan/exhaust fan point controlled by one, one way switch, 5 Amps with cable 1.5 sqmm size. 83 All as per Item No 82 above but for One 3 pin socket outlet, 5 Amps, same board, with cables 1.5 sq. mm size. 84 All as per Item No 82 above but forOne 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size. 85 All as per Item No 82 above but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket, Independent board incl running of1.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. 86 S&F switch piano, flush type,single pole one way 5 Amp complete all as specified and directed. 87 S&F Ceiling Rose, PVC/polycarbonate, isolated body 3 terminal complete all as specified and directed. 88 S&F Socket outlet 2 in 1, 3 pin, 5 Amps flush type universal complete all as specified and directed. 89 S&F Switch Socket combination 2 in 1, 3 pin, 5 Amps flush type universal complete all as specified and directed. 90 S&F Switch Socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal complete all as specified and directed. 91 S&F stepped type electronic Fan Regulator flush type complete all as specified and directed. 92 S&F Lamp holder, PVC polycarbonate type with back plate suitable for batten/angular fittings complete all as specified and directed. 93 S&F LED Bulb 23 Watt complete all as specified and directed. 94 S&F LED Bulb 10 Watt complete all as specified and directed. 95 S&F LED Tube Light Fitting 1 x 20 Watt, 220 Volts, AC decorative box type with driver, holder incl LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 96 S&F LED light fitting 1x9/10 Watt Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 97 M&L Ceiling Fan complete with blades, down rods, electronic regulator and accessories, 230 Volt, 1400 mm sweep.Min air delivery 245 CFM and service value 6.0 BEE.5 Star rated with brushless direct current motor (BLDC) complete all as specified and directed. 98 S&F Exhaust Fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. 99 S&F Sheet metal enclosures forDB, Single pole & Neutral, 12 way with 200 Amps rated bus bar, double door, 240 Volts complete all as specified and directed. 100 S&F Sheet metal enclosures forDB, Single pole & Neutral, 4 way with 200 Amps rated bus bar, Double Door, 240 volts complete all as specified and directed. 101 S&F MCB TPN, 415 Volts, 32 Amps, 10 kA, C Curve, 50 Hz complete all as specified and directed. 102 S&F MCB SPN, 240 volts, 32 Amps, 10 kA, 50 Hz complete all as specified and directed. 103 S&F MCB SP, 240 Volts, 6-32 Amps, 10 kA, C Curve, 50 Hz complete all as specified and directed. 104 M & L for Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level, connected to DB/pole/LA etc and incl GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers, protected with and incl 15 mm dia light grade GI pipe, 20 mm dia GI pipe (Medium grade) for watering, necessary earth work.PCC 1:3:6 type C1 concrete pit, RCC (1:1.5:3) type A1 pre-cast cover (54X54X5 cm) duly reinforced with and incl 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar, embedded in pre-cast cover slab all as specified and shown in electrical plate No-3 of SSR Part-I including testing on completion complete all as specified and directed. 105 Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in hard/dense soil for laying ofUG cable complete all as specified and directed. 106 M&L for sand cushioning using dry and clean river sand in two layers, first layers of 80 mm thick before laying of cable and second layer of 150 mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed.Note :- Punned thickness only will be measured and paid. 107 Supply and laying well burnt/fire Bricks of size 230 x113 x 75 mm locally available best quality (sub class B bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified. 108 Supply and laying of XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 25 Sqmm x 4 core complete all as specified and directed . 109 All as per Item No-108 but of size 6 Sqmm x 2 core complete all as specified and directed . 110 Supply and laying of 40mm dia GI tubinglight grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified anddirected. 111 All as per Item No-110 but of size 25 mm dia bore complete all as specified and directed . 112 Supply and Fix 25 mm Outer Dia 3 layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN-16) as per IS:15801 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings fixed to wall and ceilings or laid in floors of sizecomplete all as specified and directed. 113 Supply and Fix 40 mm Outer Dia 3 layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN-16) as per IS:15801 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of sizecomplete all as specified and directed. 114 All as per item No-113 here in after butof size 25 mm dia. 115 Supply and Fix 25 mm dia PP-R Gate valve (Brass insert) with iron wheel head, screwed both ends, ISI marked fixed to PP-R pipes complete all as specified and as directed. 116 S&F 25 mm bore dia Ball Brass Valves, high pressure, with polythene float and fly nut complete for brass ferrulecomplete all as specified and directed. 117 Cutting the existing road straight by manual, depth and width not less than 30 Cm for pipes up to 50 mm dia and filling back with excavated soil up to 75 %road portion and 25 % shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed. 118 Cutting existing PPR/steel tubing for alterations or additions if necessarily done in position without taking down of size upto 50 mm dia bore complete all as specified and directed.
