Tender For Welcome Maintenance And Certain Misc B/R And E/M Repairs To Offrs Md Accn At Kelvin Grove Under Ge (I) Jutogh; 1 Dismantling of floor hearth or wall tiling/ stone slab incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. 2 Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. 3 Supply only Integral waterproofing compoundall as specified as per manafature instruction complete all as specified and directed. 4 M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed. 5 M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection path etc., complete all as specified and directed. 6 M&L for chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick, set ,jointedand pointed in neat cement slurry with grey cement and pigment in floors laid over 20mm thick screed bed in CM 1:6, complete all as specifiedand directed. 7 M&L for 40mm thick PCC 1:2:4, type B-1, using 20mm graded stone aggregate, as base coarse for floors, complete all as specified and directed. 8 M&L for non skid ceramic tiles 7-8mm thick coloured (Square/ rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqmin floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. 9 M&Lforof glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm/300x200x6to7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4, complete all as specified and directed. 10 M&L for vitrified ceramic tiles 7-8mm thick coloured (light shade, Square/ rectangular) polished area of each tiles exceeding n.exc 0.36 sqmin floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. 11 M&L for vitrified skid ceramic tiles 7-8mm thick coloured (light shade, square/ rectangular) polished area of each tiles exceeding n exc 0.36 sqmin vertical surface such as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4, complete all as specified and directed. 12 Demolition of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortarin floors, aprons, cooking platform etc., complete all as specified and directed. 13 M&L 18-20mm thick granite (of any type) work table rubbed andpolished) in pillar/ vertical surface, cooking platform, countertop wash basin and like in 15 thick screed bed CM 1:4 incl edges of stones slabs one edges such as cooking steps or etc, moulding, pointingin white cement 1:2, using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. 14 M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, over 10mm thick rendering as in CM 1:3 and other similar situations, complete all as specified and directed. 15 S&F 1.5mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, homogenious laid with approved rubber based adhesive in floors complete all as specified and as directed (including dismantling of old PVC sheet from floor and removing from site), complete all as specified and directed. 16 Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided, complete all as specified and directed. 17 M&L for RCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in chajja repairs at any height incl necessary requiredformwork, providing and erecting at site conventional steel double scaffolding to reachat any height/any place of work on the external facade of the building including approaches, extensions, working platforms, ladders, lifting tackle for men and materials etc all complete, inclusive of covering by hessian cloth or tarpaulins, dismantling and taking away all materials after the completion of praposed work etc., complete all as specified and directed. 18 M&L for reinforced cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in columns/ beams/ slab, landings and in shelves and incl necessary required formwork, complete all as specified and directed. 19 S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia, complete all as specified and directed. 20 Taking down cement or cement lime plaster, of any description incl tiling etc., complete all as specified and directed. 21 M&L for rendering 15 mm thick in cm (1:6) on brick workorconcrete surfaces finished even and fair, complete all as specified and directed. 22 M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surfaces (1:4) finished even and fair (without using extra cement), complete all as specified and directed. 23 M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of birla white putty 1-2mm thick on walls, complete all as specified and directed. 24 M&L for applying two or more coats of 100% premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height of building/ tower complete all as specified and directed. 25 Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets, complete all as specified and directed. 26 S&F GI Clip-in false ceiling tiles of with beveled edges of with GI sheet (600mmx600mm) is manufactured out of 0.50mm galvanized steel of 100 gsm/sqmtr sheet having powder coated with 60 microns polyester paint on front side. These tiles shall have beveled edges. Two sides of each tiles are raised and piped and stopped to ensure positive engagement into the spring clip-in profile, yet allow for demounting of individual tiles. The rigid suspension system consists of rows of 0.5mm galvanized steel clip-in profiles of size 24mmx34mm of 0.5mm thick and installed at 600mm c/c spacing to support the tiles, clip-in profiles are suspended with hold on clamps. Suspension angles or 4mm GI Wire are suspended from the roof structure. The tiles are held in place by pressure clips. In the flexible system the hanger and suspension clip replace the suspension angle. GI Edge profile are of size 24x24x0.35mm thick with matching the color with tiles, complete all as specified and directed. 27 M&L for standard size (100mmx12mm), wood panelling refers to wall/ceiling covering made from pine wood planks,featuring a light,natural colour with visible grain patterns and knotsfixed with self tapping screw onwood frmae work etc complete all as specified and directed. 28 M&L for solid PVC as in use wall/ ceiling lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as pe specifications and drawing incl necessary beading work, incl same board beading for joint sealed complete all as specified and directed. 29 Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height, complete all as specified and directed. 30 M&L for brick work with old size kiln burnt sub class B bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed. 31 M&L forbrick work with sub class B brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall builtcomplete all as specified and directed. 32 Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. 33 S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with with coach screws and washers, in roofs, walls etc. with grade of Zinc coating 120 GSM, complete all as specified and directed. 34 S&F 0.63 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 GSM, bent to shape as required, fixed withcoach screws and washers in roofs and wall etc, complete all as specified and directed. 35 S&F pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws, complete all as specified and directed. 36 S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, eaves board fixed with self tapping screws, complete all as specified and directed. 37 S&F 0.50mm thick prepainted aluminium zinc coating liner profile high strenth steel sheet is an attractive, slightly fitted wall & ceiling cladding for exterior aand interior use, on straight or curved surface, complete all as specified and directed. 38 Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. 39 S&F rooftrusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250), quality-A etc., complete all as specified and directed. 40 S&F framed work such as grills, gratings, ornamental gates, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railing, framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165, complete all as specified and directed. 41 M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. 42 Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. 43 S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. 44 S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed. 45 S&F sheet glass 5.5 mm thick tinted glass in square exc 0.5 sqm in each pain, complete all as specified and directed. 46 Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each, complete all as specified and directed. 47 Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed. 48 Taking downshutters of any description exc 1 Sqm each complete all as specified and directed and n exc 2 Sqm each, complete all as specified and directed. 49 Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening after repairs, complete all as specified and directed. 50 S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed. 51 S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately 52 S&F in repair factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length and making it good to match with existing surface, complete all as specified and directed. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 53 S&F anodized powder coated (powder coating color/shade as approved by GE)aluminium frame/shutters for doors, windows, ventilators of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixingand cleat for receiving glass/ wire mesh etc., complete all as specified and directed. 54 S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, handle, tower bolt, peg stay, screws etc., complete all as specified and directed. 55 S&F 35mm flush shutters, solid core construction, with block board core and plywood face panells, commercial types on both sidesincl teak wood beading alround the shutters, complete all as specified and directed. 56 S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framaing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels, complete all as specified and directed. 57 S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed. 58 S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed. 59 Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in sectionin any position with nails etc., complete all as specified and directed. 60 M&L for plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcmincluding repairs orif refixed in old position complete all as specified and directed. 61 Dismantling boarding any description, fixed in any position with nails for cupboards, complete all as specified and directed. 62 S&F block board, interior grade, commercial type,fixed with screws timber frame work and incl beading, complete all as specified and directed. 63 S&F 0.90mm thick decorative laminated sheet of surface finish, colour and pattern as approved fixed with adhesive as per manufacture instruction, complete all as specified and directed. 64 S&F Continous piano hinges mild steel bright finish or electro galvanised with open flap width 30mm, fixed with screw complete all as specified and directed. 65 S&F D-type cabinet handles premium quality, stainless steel 304/ gloss chrome/ SN finished 150mm long matt finished complete fixed in position complete all as specified and directed. 66 S&F magnetic catches 75 mm brass body for use in cup boards of kitchen, ward robes etc. complete all as specified and directed. 67 S&F mild stell heavy duty telescopic soft close slide full extension ball bearing drawer slides of size 18 inch(silver) for use in cup boards of kitchen, ward robes etc. complete all as specified and directed. 68 M&L for preparation ofnew wooden surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. 69 S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed. 70 S & F 300mm Mild Steel ordinary rat tailrod pattern springs including roller and roller plate complete all as specified and directed. 71 S&F aluminium extruded alloy handles fabricated type anodised 125mm long complete all as specified and directed. 72 S&F aluminium extruded alloy handles fabricated type anodised 100mm long complete all as specified and directed. 73 S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed. 74 S&F Butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type C-21, complete all as specified and directed. 75 S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long, complete all as specified and directed. 76 S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long, complete all as specified and directed. 77 S&F in repair floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors, complete all as specified and directed. 78 Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed. 79 Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed. 80 M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. 81 S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed. 82 S&F in repair steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore complete all as specified and directed. 83 S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etccomplete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. 84 S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc., complete including 20mm dia float valve and dismentling of existing tank complete all as specified and directed. 85 S&F in repair 20mm ball valves high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight for 210 gms, complete all as specified and directed. 86 S&F 21-22 inch dia galvanised mild steel pan mortar(tasla/ ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut & bolt with 8 Nos washer including fixing on water storage tank as tank cover, complete all as specified and directed. 87 M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed. Note: Any damage to FV, pipe etc shall be made good by the contractor. 88 M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete all as specified and directed. Note: Any damage to FV, pipe etc shall be made good by the contractor. 89 S&F 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions and fixed in repairs complete all as specified and directed. 90 S&F in repair 15 mm dia Angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed. 91 S&F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule, complete all as specified and directed. 92 S&F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed. 93 S&F in repair 15mm brass CP wash hand basin/ kitchen sink mixer for mixing hot and cold water complete all as specified and directed. 94 S&F in repair of60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing, complete all as specified and directed. 95 S&F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 96 S&F in repair brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges complete all as specified and directed. 97 S&F in repair 15mm size PVC connection pipe with PTMT nuts of length 600mm long, complete all as specified and directed. 98 S&F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts, complete all as specified and directed. 99 S&F in repair vaccums pressure vitreous china wash down water closet (pedestal pattern) coloured including all fittings, fixing bolts, waste pipe, inbuilt fluhsing cistern and flush pipe complete all as specified and directed. 100 S&F in repair vitreous china wash basin pedastal pattern super white/ colour of size 560x475mm incl all fittings, decorative type, complete all as specified and directed. 101 S&F in repairs vitreous china squatting pan, Orissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc(excluding flushing cistern and flush pipe complete all as specified & directed by engineer in charge. 102 S&F in repair PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets complete all as specified and directed. 103 S&F in repair wash basins, vitreou china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length, complete all as specified and directed. 104 S&F 5mm thick looking mirror with 6mm thick back ply wood and wooden frame, including plugging on wall and fixed, complete all as specified and directed. 105 S&F in repair 25mm dia stainless steel chromium plated curtain rails fixed with brackets, stops, rollers, etc. complete all as specified and directed. 106 S&F in repair stainless steel plate rack (utencil rack for kitchen of size 900 x 750 x 250mm and min 0.80 to 1.00 mm thick fixed with stainless steel screw and rawl plug, complete all as specified and directed. 107 S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/ waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410x330x160mm, complete all as specified and directed. 108 M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed. 109 S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. 110 S&F PVC SWR Bends in any radius 110 mm bore with access door, complete all as specified and directed. 111 S&F PVC SWR Bends in any radius 75 mm bore with access door, complete all as specified and directed. 112 M&L for water proofing treatment of sunken floor of WCs, Bathroom etc. by applyiung of the folling specifications:- (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc.and remove all loose/ unsound material, dirt, dust, etc. (ii) Applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating Hydroproof Xtra of FOSROC/Equivalent of Dr Fixit of pidilite industries Ltd in the ration of 1:2:4(One part of acrylic polymer : Two part of water and four part of cement). (iii) First layer of cement slurry @ 0.444 Kg/Sqm mixed with acrylic based modified cementious cpmposite compound @ 0.222 Litre/Sqm and allow it to air dry for 04 Hours. (iv) Second layer of cement slurry @ 0.222 Kg/Sqm mixed with acrylic based modified cementious cpmposite compound @ 0.111 Litre/Sqm and allow it to air dry for 04 Hours followd with water curing for 48 hours. (v) 200 micron thick polythene film shall be pasted with helpof adhesives over treatment. Note:- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compond. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. 113 M&L for plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in filling of mass concrete for floors complete all as specified and directed. 114 M&L for mild steel works as in bends straps, hold fasts etc, conforming to IS-206 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed. 115 M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified and directed. 116 M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains incl fair finises &necessary formwork complete all as specified and directed. 117 M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of oil emulsion distemper(tint as approved by GE), inclwherever required fillings of gaps, holes, patches with wall care putty of existing surface with sand paper or iron patti/ flat complete all as specified and directed. 118 M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying two coat of oil emulsion distemper (tint as approved by GE) inclwherever required fillings of gaps, holes, patches with wall care putty of existing surface with sand paper or iron patti/ flat, complete all as specified and directed. 119 M&L for preparation of old paintedwood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed. 120 M&Lr for preparation of old paintedwood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) complete all as specified and directed. 121 M&L for preparation of old paintedsteel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed. 122 M&L for preparation of old paintedsteel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) complete all as specified and directed. 123 M&L for preparation of plastered or unplastered old decorated surfaces with sand papering of walls incl cornices etc. incl washing, rubbing down and stopingthe connected previously treated surfaces and applying one coat of acrylic emulsion exterior quality (Apex painting) (tint as approved by GE) complete all as specified and directed. 124 Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. 125 Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. 126 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse or refixing the same, including provision of wires, etc at site or carrying to the store (To be measured only when found serviceable in all respects, complete for reuse) complete all as specified and directed. 127 Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets etc to be measured separately) , removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. 128 M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC casing-N-capping size of 25x32 mm wiring with all fittings and accessories, terminated to sunken box and laminated sheet of suitable size for housing/ mounting the switches/ sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light/fanpoint control by one, one way switch, complete all as specified and directed. 129 All as per Srl item No 128.00 above but for one Bell / Buzzer point controlled by one push switch on independent board, complete all as specified and directed. 130 All as per Srl item No 128.00 above but for two way swithces, complete all as specified and directed. 131 All as per Srl item No 128.00 above but for one 3 pin socket oulet 5 amps, onsame board with other switches, complete all as specified and directed. 132 All as per Srl item No 128.00 above but for one 3 pin socket oulet 5 amps, onindependent board, complete all as specified and directed. 133 All as per Srl item No 128.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm complete all as specified and directed 134 All as per Srl item No 128.00 above but for one 3 pin 15 Amps power point on independent board with 4.0 Sqmm complete all as specified and directed 135 All as per Srl item No 128.00 above but in existingconcealedconduit/ casing-n-capping, complete all as specified and directed. 136 All as per Srl item No 135.00 above but for one 3 pin socket oulet 5 amps, onsame board with other switches, complete all as specified and directed. 137 All as per Srl item No 135.00 above but for one 3 pin socket oulet 5 amps, on independent board, complete all as specified and directed. 138 All as per Srl item No 135.00 above but for for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm complete all as specified and directed. 139 All as per Srl item No 128.00 above but in concealed with PVC conduit, complete all as specified and directed. 140 All as per Srl item No 139.00 above but for one Bell/ Buzzer point controlled by one push switch on independent board, complete all as specified and directed. 141 All as per Srl item No 139.00 above but for two way swithces, complete all as specified and directed. 142 All as per Srl item No 139.00 above but for one 3 pin socket oulet 5 amps, onsame board with other switches, complete all as specified and directed. 143 All as per Srl item No 139.00 above but for one 3 pin socket oulet 5 amps, onindependent board, complete all as specified and directed. 144 All as per Srl item No 139.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm complete all as specified and directed. 145 All as per Srl item No 139.00 above but for one 3 pin 15 Amps power point on independent board with 4.0 Sqmm complete all as specified and directed. 146 S&F switch piano flush single pole, one way 5 Amp ( ISI marked)complete all as specified and directed. 147 S&F Bell push, flush type, 5 amp ( ISI marked)complete all as specified and directed. 148 S&F switch piano flush single pole, two way 5 Amp ( ISI marked)complete all as specified and directed. 149 S&F switch piano flush single pole, one way 15 Amp ( ISI marked)complete all as specified and directed. 150 S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type complete all as specified and directed. 151 S&F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal complete all as specified and directed. 152 S&F in repair Modular switch 1 way, 6 Amp, 1 module, complete all as specified. 153 S&F in repair Modular switch 1 way 16 A, 1 module complete all as specified and directed. 154 S&F in repair Modular Bell push 6 A, 1 Module complete all as specified and directed. 155 S&F in repair modular socket, 6A-2/3 pin combined 2 modulecomplete all as specified and directed. 156 S&F in repair modular socket, 6A/16A-2/3 pin combined 2 module complete all as specified and directed. 157 S&F in repair white cover plate with frame 2 Module complete all as specified and directed. 158 S&F in repair white cover plate with frame 4 Module complete all as specified and directed. 159 S&F in repair white cover plate with frame 8 Module complete all as specified and directed. 160 S&F for metal flush box 2 module complete all as specified and directed. 161 S&F for metal flush box 4 module complete all as specified and directed. 162 S&F for Metal flush box6/8 module complete all as specified and directed. 163 S &F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked), complete all as specified and directed. 164 S&F in repairBell AC, 230 volts, complete all as specified and directed. 165 M&L for lamp holder (Angle) PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. 166 S&F LED 14 watt complete all as specified and directed. 167 S&F LED tube light along with fixture, 1x20 watt, (4 Feet) wall mounted LED battern, integrated electronic driver with heat sink provided for efficient heat dissipation, optics diffussed, complete incl electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. 168 S&F LED tube light along with fixture, 1x10 watt, (2 Feet) wall mounted LED battern, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. 169 S&F LED bulkhead luminaire 20W decorative type as per sample complete incl electrical connection with copper cable from ceiling rose to fittingsand including taking down existing fittings all as specified and directed. 170 S&F LED building securtiy light 40 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. 171 M&L for submain wiring with 2x6.0Sqmm+1x6.0Sqmm earth wire single core PVC insulated FRLS-H PVC sheathed cooper cableconnecting to common earth dolly in and incl heavy duty PVC concealed conduit as per site requirement and direction by EIC, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run PVC conduit/ casing shall be measured one unit length. 172 All as per Srl item No 171.00 above but for 2 run of single core 4 Sqmm FRLS-H PVC insulated unsheathed multistranded copper conductor cable and one run of 4.0 Sqmm FRLS-H PVC insulated unsheathed multistranded copper conductor earth wire complete all as specified and directed. 173 S&F sheet metal enclosure MCB DB 12 way, SPN double door suitable for 240 V, fixed flused on walls incl cutting knitch and making good disturbed surfaces, complete all as specified and directed. 174 S&F sheet metal enclosure MCB DB 8 way, SPN double door suitable for 240 V, fixed flused on walls incl cutting knitch and making good disturbed surfaces complete all as specified and directed. 175 S&F sheet metal enclosures DBs 4 way, SPN doubledoor suitable for 240 V, complete all as specified and directed. 176 S&F MCB SP (single pole) 06 to 32 Amps, B Curve with 10 kA for inductive load connected through cable lugs of suitable size, complete all as specified and directed. 177 S&F MCB SPN/ DP (single pole and neutral) 32/40 Amps B Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed. 178 S&F MCB SPN/ DP (single pole & neutral) 240 volt 63 amps B Curve with 10 kA for inductive loadconnected through cable lugs of suitable size, complete all as specified and directed. 179 S&F MCB protected socket 15/20 Amp incl 25 Amp MCB suitable for domestic and commercial use gyeser with PVC box, sheet steel enclosure (ISI marked) flush type complete all as specified and directed. 180 S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and fixing arrangements complete all as specified and directed. 181 S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm incl fixing all arangements complete all as specified and directed. 182 Su&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metal body with louver including fixing all arangements complete all as specified and directed. 183 S&F AC single phase static energy meter of accuracy class 1.0, 240 V, 50 Hz with Backlit LCD display of rating 5 - 30 A, (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type boxincluding fixing all arangements, complete all as specified and directed. 184 S&F in repair PVC conduit of 25mm dia complete all as specified and directed. 185 S&F in repair PVC casing capping of 25mm (1)width complete all as specified anddirected 186 S&F in repair Single core PVC Insulator with copper stranded conductor cable 1100V grade ISIsize 4.0 Sqmm complete all as specified and directed. 187 S&F in repair single core PVC Insulator with copper stranded conductor cable 1100V grade ISIsize 6.0 Sqmm complete all as specified and directed. 188 M&L for earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including galvanised strip protected by 32 mm bore light grade galvanised iron pipe and earth and connected to test point as directed including funnel, watering pipe 20 mm bore light grade galvanised iron wire mesh charcoal and common salt in alternate layers of 15 cm compacted thickness all arround the GIelectrode with concrete pit in PCC 1:3:6, type C-1, includingnecessary excavation in soft/loose soil and disposal of soil to a distance not exc 50 m and necessary testing complete connected to earthing test point complete all as specified and directed.
