}

Improvement To The Executive Engineer / O&M / Thiruvarur Office., thiruvarur-Tamil Nadu

Tamil Nadu Generation And Distribution Corporation Limited has published Improvement To The Executive Engineer / O&M / Thiruvarur Office.. Submission Date for this Tender is 21-08-2025. Building Work Tenders in thiruvarur Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

50479702
Improvement To The Executive Engineer / O&M / Thiruvarur Office.
Tender
Indian
Tamil Nadu
Thiruvarur
21-08-2025

Tender Documents

Tender Details

Improvement to the Executive Engineer / O&M / Thiruvarur Office.- 1 Chipping the concrete and roughening the surface and clearing away from the site ,including cost of all materials and labour etc., complete. 2 Brick Work in Cement mortar 1:6 using country bricks of size 9x4 3/8x 2 3/4 including cost of all materials,labour lead ,lift etc complete. 3 Plastering with CM 1:3 ,20mm Thick including cost of all materials, labour, lead, lift etc complete. 4 Plastering the walls with CM 1:5,12mm thick including cost of all materilas, labour,lead,lift, etc., complete. 5 White washing two coat with white cement including cost of all materials, labour,lead,lift,etc., complete. 6 Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with3 mm thick hylum sheet cover with TW switch box and 5 A F.T switchwith continuous earth wire connection of 14 SWG TC for making good of the concealed portion with suitable colour for PVCconcealed PVC light point. 7 Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with3 mm thick hylum sheet cover with TW switch box and 5 A F.T switchwith continuous earth wire connection of 14 SWG TC for making good of the concealed portion with suitable colour for PVCconcealed PVC Fan point. 8 Wiring with 2x1.5 sq mm (22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V Grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW Switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking CS plugwire with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. 9 Wiring with 2 x 1.5sq mm (22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVCaccessories with150mm x 100mm x 113mm TW switch box in flush with wall with 3 mm thickhylem sheet cover for 15A e pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. 10 Supplying and Fixing of Single box type 4’ 40W flu. Fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu. tube with PVC unsheathed copper leads from terminals to the fitting. 11 Supplying and fixing of 1200 mm (48”) AC ceiling fan complete with stepped electronic 300W regulator with 300 mm down rod on the existing clamp. 12 Providing partition with anodized aluminium frame using medium gauge aluminium hallow tubular section of size 62 x 35 mm and 95 x 38 mm at bottom fixed with approved quality and 4mm thick Cooling glass 4mm thick for top panel and 12 mm thick particle board with lamination (both sides )of approved qualityfor board partition fixing in equal panel (or) as directed by Engineer in charge of the work including cost of all materials, labour charges for fabrication and fixing, lead, lift etc., complete. 13 Supply and fixing in position of anodisedaluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, door pivot and with 12mm tk. one side laminated board at bottom half portion and top half portion with 4mm thick plain galss glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.00 x 2.10 m.

Key Value

Document Fees
Refer document
EMD
INR 2400.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail