Tender For Special Repair To Bldg No P-288 Under Ge Dehradun.; 1 Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed. 2 M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m radius built in cementmotar CM 1:6 complete all as specified and as directed 3 All as per Item No - 01 here-in-before but except bricks complete all as specified and directed. 4 Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified. 5 M&L for 15 mm thickrendering on of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth with using extracomplete all as specified and as directed by Engr-in-Charge. 6 M&L for 15 mm thickrendering on of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth with using extracomplete all as specified and as directed by Engr-in-Charge. 7 M&L for 10 mm thick ceiling rendering on of brick work or concrete surfaces in cement mortar 1:3 finished surfaces even and smooth with using extracomplete all as specified and as directed by Engr-in-Charge. 8 Material and labour for preparation of newly plastered surface on ceilings and applying two coats of distemper oil emulsion on ceiling, off sets, pillar etc. over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. 9 M&L for two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing including preparation of surfaces to receive the coats as per manufacturer directions all as specified and directed by Engr-in-Charge. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac Perma No Damp + or equivalent. 10 M&L finishing walls with textured exterior/heritagepaint of required shade : New /old (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 11 Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of OBD over applying of 1-2 mm thick wall care putty finish wall/surface even & smooth complete all as specified and directed. 12 Taking up or down 15 mm steel tubing and connections complete all as specified and directed. 13 Taking up or down 20 mm steel tubing and connections complete all as specified and directed. 14 M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good complete all as specified and as directed 15 S&F in repair medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed 16 S&F in repair tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed 17 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified. 18 Material and labour for non skid/mat finish ceramic coloured tiles of size 400 mm x 400 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 19 M&L Glazed ceramic tiles coloured 300mmx 450mm , 6-7 mm thick, set and jointed on vertical surface in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plaster in cement mortar 1:4 etc complete all as specified andand as directed. 20 M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed. 21 M & LVirified tiles light shade 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 22 ditto dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in cement mortar 1:4 complete all as specified and directed. 23 M&L for Durastone heavy duty coloured tile 300mmx300mm x 9-10mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured of white cement to match including 15 mm thick screed bed in cement mortar 1:6 and dismantling of old tile complete all as specified and directed. 24 M & L 600mm X 600mm for 9 to 10 mmthick rubber matewith fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved including stretching, cutting and fitting and sealed down complete all as specified and directed. 25 M & L 595 mm X 595mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed gridincl board etc complete including taking down of old all as specified and directed by Engineer-in-Charge. 26 Supply and fixing for hollow PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing including dismantling of old boarding complete all as specified and directed. 27 Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. 28 Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. 29 Supply and fixing for powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed by Engr-in-charge. Size of Track-Both Top & Bottom (Verticles sides):- 100 x 44 x 1 mmSize of Shutter Frame:- 25 x 12 x 1 mmNote: Iron grill with frame to be fixed with window (measured and paid separately) 30 Supply and fixing for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed.Note: Iron grill with frame to be fixed with window (measured and paid separately) 31 Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete as directed and specified. 32 M & L 12-15mm thick granite (Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge. 33 Material and labour for 12-15mm thick granite (table rubbedand polished)in steps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types (e) Green Marble 34 Garding of any type stone to achive mirror polishing on existing terrazzo/ kota / udaipur green/ marble stone flooring/skirting by cutting/ grinding and polishing complete all as directed. 35 S&F in repair 110mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to wall complete incl clamps for fixing to wall all as directed. 36 S&F in repair 110mm bore PVC (SWR) bend of any radius fixed as directed. 37 S&F in repair 110mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as directed. 38 S&F in repair 110mm bore PVC (SWR) bend of any radius fixed as directed. 39 S&F as in repair Bevelled edge mirror frame less of selected quality of size 1500 mm x1000 mm x5mm thick fixed withstuds etc complete all as specified and as directed 40 Hacking out old broken galss (any thickness, size quality or desription) from wooden frame or sotne, concrete or brick surrounds, glazed with putyy or bised with beads. 41 S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed. 42 S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed. 43 Supply and fixing factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed by Engr-in-Charge. 44 Supply and fixing 30 mm thick WPC factory made 100% solid designer flush door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified and directed by Engr-in-Charge. 45 S&F 150 mm long steelness steel handle, cast type,complete all as specified and as directed 46 S&F steelness steel tower bolt 200 mm long of extruded section etc complete all as specified and as directed 47 S&F steelness steel tower bolt 125 mm long of extruded section etc complete all as specified and as directed 48 Supply and fix ss sliding door bolt size 300 mm with hasp, staple (boltype) and fixing clips of sheet,cast orextruded sections and fixing bolts and sliding bolts of extruded sections or cast-Complete all as specified and directed by Engr-In-charge. 49 S&F floor door stopper 150mm overall length of cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to floor all as specified and directed. 50 S&F in repair door closer gydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg of Aluminuim die cast body complete all as specified and directed. 51 Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement including demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete all as specified and directed. 52 Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge 53 Dismantling of framed or unframed timber scantlings 40 Sq cm and over in section, in any postion complete all as specified and directed.. 54 &F MSjoist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section,MS tubes, flats square bars etcfixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge 55 S&F for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. 56 S&F10mm thickplate (Fe 410-W(Gde-E- 250) quality-A) (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmenother connections complete all as specified and directed 57 M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed 58 Dismantling asbestos cement (corrugated , semi corrugated, etc.) sheets in roof coverings.Complete all as specified and directed. 59 S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls etc fixed with self tapping screws as specified and directed. 60 S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. 61 Supply and fix for rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks of weight not less than 33Killogram (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia including dismantling of old tank complete all as specified and directed. 62 S&F in repair 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed 63 S &F in repair as Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed 64 S&F in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. 65 S&F in repair PVC nahani trap, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. 66 Supply and fixin repairs vitreous chinaware wash downwater closet pan fency type including fixing bolt, and flushing cistern, Dual flush single piece wall mounting EWC with soft close seat cover fittings P or S trap complete all as specified and directed. 67 S&F in repairtubular towel rail 20mm dia type brass chrormium plated 600mm long stainless steel between flanges complete all as specified and as directed 68 S&F in repair PVC connection of 45 cm length including brass nuts complete all as specifiedand as directed 69 S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. 70 S&F in repair soap dispenser with glass bottle in toilet block each one complete all as specified and directed. 71 S&F in repair toilet roll Holder complete all as specified and as directed 72 Supply and fixin repairs vitreous chinaware coloured wash hand basin with pedestalofsize 55X40 cmcomplete including waste coupling ,waste pipe including fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed. 73 S&F in repair brass chromium plated bottle traps for wash basins, urinals with inlet and outlet screwed for pipe or connections inclding necessary packing union and cap and fixed complete all as specified and directed. 74 S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed 75 Supply and fixin repair health faucet brass chromium plated suitable for 15mm dia pipe with 1 or 1.25mtrmetre long flexible tube and ABS wall hook fixed to wall complete all as specified and directed. 76 S&F in repair stop valves/angle valves fancy typechromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionsfixed for 15 mm dia bore pipe complete all as specified and as directed 77 Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in non rigid PVC concealed conduit not less than 25mm diawith all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including Modular metal flush boxes 1.6 mm thick, upto 60 mm deep of required size factory made for mounting modular switch, regulators etc with inner /outer cover and frame(white) ISI marked, fixed with brass screwsincluding taking down unsv point wiringof any sizefor the following type . Note: (i)The quoted rates shall be deemed to be inclusive formaking good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. 78 One light point controlled by one, one way switch 5 Amps 79 One fan point point controlled by one, one way switch 5 Amps . 80 One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. 81 One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. 82 All as per item No 77 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI markedfor 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. 83 S & Fin replacementModular switch single pole one way 6 Amp 84 S & Finreplacement Modular switch single pole one way 16 Amp 85 S & F in replacement Modular socket outlet 2/3 pin combined 6 Amp 240 volts 86 S & FinreplacementModular socket outlet 2/3 pin combined 16 Amp 240 volts 87 S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete . 88 Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 89 S&F LED Mirrorlight fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete 90 S&FExhaust fans AC single phase 230/ 240 V of size 300 mm sweep,50 Hz with louver of size 300 mm sweep, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block includingcomplete all as specified and directed. 91 S&F BLDC Ceiling Fan complete with electronic type regulator and remote accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fabricating and fixing ofFan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessarynuts and bolts complete all as specified and directed. 92 S&F Water heater storage type,electric, capacity 25 litres AC single phase 230/ 240 V o and connecting upincluding making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 blockcomplete all as specified and directed. 93 S & F in replacementDistribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed
