Tender For Repair Work Of Kasturba Gandhi Residential Girls School, Kudwar, Under Assembly Constituency Isauli - Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 metre ¼200ft.) SI no. 706As Per DSR no 15.23.1 2 12 mm plaster with 1:6 cement and course sand as per dsr 13.4.2 ( 1cement:6 course sand) Per DSR no 13.4.2 3 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 metres ¼200ft½ As Per DSR no 14 4 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (As per DAR No.13.26) / As per Anlaysis 5 Finishing walls withAcrylic Smooth exterior paint of required shade :13.112.1 Old work (Two or more coat applied @ 1.43 ltr/10 sqm over existing surface. As Per DSR no 13.112.1For oldsurface 6 Two coat oil distemper on new work including supply of all materials, labour and T & P etc. required for proper completion of the work. As Per DSR no 13.81*2 7 Painting on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.As Per DSR no 13.48.1For old surface 8 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:AsPer DSR no 9.21.1For 35 mm thick including ISI marked Stainless Steel butt hinges with necessary 9 Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismantled materials as directed by the Engineer-in- charge with in a distance of 60 metres ¼200ft½ As Per DSR no 15.23.1 10 20 mm plaster with 1:4 cement and 4 course sand as per DSR 13.6.1 ( 1cement: 4 course sand) 11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. As per DSR 11 12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS: 15622, of approved make, in all colours and shades, laid with cement base high polymer modified quike set Tile Adhesiveas per DSR11.49.2side of Tile 600X600 mm 13 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 14 Renovation of existing Bathroom including supply and fixing of allother required accessories complete in all respect as per direction of E/I.Supply and fixing of Looking Mirror with H.B. 600x450mm complete with hard board 15 ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes 18.7.1 16 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 17 Supply of C.P. Brass bib cock long body 18 Supply of C.P. Brass Stop cock. 19 Supply of C.P. Brass Angle Valve 20 Supply of C.P. Jet shower 21 Supply of C.P. Towerl Rail 22 Supply of C.P. Jali 6 dia 23 Providing and fixing in floor and wall face Ringfit UPVC ASTRL ULTRA Drain conventional system for soil and waste water pipes conferming to (HSN code : 3917)Type B including jointing with seal ring. (1) Double socketed pipes, (a) 110 mm dia P.V.C. pipe completeas per direction of Engineer in Charge. 24 Supply and Fixing Nahani/Floor Trap 25 Dismantling of W/C ,flushing cistern of all types (C.I./PVC/Vitrious China), including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 26 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests 27 ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes 18.7.1 28 Supply of C.P. Brass bib cock 29 Supply of C.P. Brass Stop cock. 30 Supply of C.P. Brass Angle Valve 31 Providing and fixing in floor and wall face Ringfit UPVC ASTRL ULTRA Drain conventional system for soil and waste water pipes conferming to (HSN code : 3917)Type B including jointing with seal ring. (1) Double socketed pipes, (a) 110 mm dia P.V.C. pipe completeas per direction of Engineer in Charge. 32 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge as per dsr 18.7.6 _ 50 mm nominal dia Pipes 33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge as per dsr 18.7.2 _ 20 mm nominal dia Pipes 34 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 35 Supply & Fixing of polyethylene water storage tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes. 1000 lit. capacity including all complete nessessary items :-Opening & Removing old Tank 01 No. (L.S) 36 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per S.O.R. item no. 18.48 37 Providingandfixingballvalve(brass)ofapprovedquality,Highorlow pressure, with plastic floats complete : 25 mm nominal bore As per S.O.R. item no 18.18.3 38 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore As per S.O.R. item no 18.52.1 39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge as per dsr 18.7.2 _ 20 mm nominal dia Pipes 40 Proving and fixing of on wall face unplasticised Rigid PVCrain water pipe including all complete as per direction by Engineer in charge as per DSR 12.41.2
