Tender For Estimate For The Cost Of Renovation Of Deputy Director Quarters At Anappady Under Sungam Range During 2025-26 - Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One or more coats on old work 2 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 3 13.99.1Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give aneven shade :One or more coats on old work 4 50.6.1.4Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest availablesize confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM1:6 ( 1 cement : 6 coarse sand ) etc complete 5 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 7 15.2.1Demolishing cement concrete manually / by mechanical means including disposal of material within 50metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 8 15.7.1Demolishing brick work manually / by mechanical means including stacking of serviceable material anddisposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mudmortar 9 13.88Removing white or colour wash by scrapping and sand papering and preparingthe surface smoothincluding necessary repairs to scratches etc. complete 10 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand 11 15.12.1Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats,architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below 12 15.13.1Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50metres lead:Of area 3 sq. metes and below 13 11.37Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by themanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), includingpointing the joints with white cement and matching pigment etc., complete. 14 11.16.1Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12mm, laid in floors, and 15 od24583/2025_2026Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to bespecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottlegreen, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cementslurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment ofmatching shade complete. 16 9.119Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm,made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mmlong brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out theframe. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as permanufacturers specification and direction of Engineer-in Charge 17 9.120.1Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC C channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall 18 od26460/2025_2026Providing and fixing Florentine table top wash basin with C.I. brackets, including wash basin tap, bottletraps and necessary fittings and brackets, cutting and making good the walls wherever require: TableTop Basin, Size: 520x360x125mm 19 Providing and fixing aluminium drawer glossy finished with necessary fittings etc 20 Providing and fixing aluminium composite panel of size 8×4 feet or 2440mm x 1220mm, 10×4 feet or3050mm x 1220mm, and 12×4 feet or 3660mm x 1220mm including all necessary hinges, screws andother fittings etc 21 PROVISION FOR SANITARY INSTALLATIONS 22 17.7.4Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass wasteof standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mmC.P.brasspillar taps 23 17.9.1 Providing and fixing kitchen sink with C. I brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x250 mm 24 17.12.1 Providing and fixing draining board with C.I brackets including painting of brackets, cutting and making good the walls wherever required:White glazed fire clay draining board of size 600x450x25 mm 25 17.32.4Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size withplastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangularshape 1500x450 mm 26 17.71Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance fromwall of standard shape with bracket of the same materials with snap fittings of approved quality andcolour, weighing not less than 105 gms 27 17.2.1Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting andmaking good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seatand lid 28 17.73.1Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality and colour450 mm long towel rail with total lengthof 495 mm, 78 mm wide and effective height of 88 mm. weighing not less than 170 gms
