|
| 1 | Sub-Head :- Appraoch Road |
| 2 | Providing laying & Compacting granular base/sub base according to lines, grades & cross sections by using naturally occuring sand gravel/conforming to IRC Grade 2 of MOST specification free from organinc or other deleterious constituents compact by rolling of the road surface to proper level and grade 30cm width edging on both sides etc complete as directed by the Engineer in charge |
| 3 | Sub-Head :- Main Building |
| 4 | Form Work :Centering and Shuttering including strutting, propping etc and removal of form for |
| 5 | a) Columns, Pillars, Piers, abutments, Posts and Struts |
| 6 | b) Suspended floors, roofs, landings, balcoinies and access platform |
| 7 | c) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 8 | Reinforced cement concrete work in walls(any thickness), including attached pillasters, buttresses, Plinth and string courses, fillets, columns, Pillars, Piers, abutments post and struts etc above plinth level upto floor five level excluding cost of centering and shuttering, finishing and reinforcement |
| 9 | a)1: 1.5: 3 ( 1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral stair cases above plinth level upto floor fove level, excluding the cost of centering shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarsed sand: 3 graded stone aggregate 20 mm nominla size) |
| 11 | Reinforcement for RCC Work including straightening, cutting bending, palcing in position and binding all complete. Above Plinth level |
| 12 | Thermomechanically Treated bars |
| 13 | 15 mm cement plaster on rought side of single of half brick wall finished with a floating coat of neat cement mix ; 1 : 3 ( 1 cement : 3 fine sand) |
| 14 | Providing wood work in frames of false ceiling, partitions etc sawn and put up in position |
| 15 | Local best quality Tolhao wood |
| 16 | Providing wood work in farmes of doors, windows, celestory windows and other farmes, wrought famed and fixed in position with hold fast lugs or with dasg fastener of required dia and length (hold fast lugs or dash fastener shall be paid seperately): |
| 17 | a) Local best quality Tolhao wood |
| 18 | Providng and fixing panelled or panelled and galzed shutters for doors, windows and celestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding planelling which will be paid seperately, all complete as per direction of Engineer-in-chargea) 30 mm thick shutters |
| 19 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shape washers etc complete; a) Hot Finished welded type tubes |
| 20 | Providing and fixing precoated galvanised iron profile sheets( size, shape and pitch of corrugation as approved by Engineer- in charge) with Zinc coating 120 grams per sqm as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoidscratches durinf transportation and should be supplied in single length upto 12 m or as desired by Engineer in charge. The Sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with 1) Precoated galvanised iron profile sheets 0.40 mmthick |
| 21 | Providing and fixing insulating board ceiling of approved quality eith necessary nails etc. complete (frame work to be paid separately): White face insulating board- 12 mm thick |
| 22 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc inlcuding welding grinding, buffing and polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size on the top of the floors or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge ( for payment purpose only weight of stainless steel members shall be paid excluding fixing accessories such as nuts, bolts, fasteners etc) |
| 23 | Supplying and fixing rolling shutters of approved make, made of required size MS laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shafts with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing 27.5cm long wire springs grade No.2 and MS top cover of required thickness for rolling shutters. |
| 24 | 10.6.1 80x1.25mm MS laths with 1.25mm thick top cover. |
