Tender For Provision Of Certain Minor Works At Af Station Jaipur; 1 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of area not exc 1.5 sqm eachcomplete all as specified and directed. 2 M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 3 S&F 18 mm thick ply wood with 1 mm thick sunmica on both sides, including first class hard wood beading (decorative) type for lipping, moulding of edges etc as in cupboard shutters, shelves, drawer etc with and including brass fitting such as hinges, handles, locking arragement, drawer pulls, drawer roller etc complete all as specified and directed. 4 S&F soft close mechanism high quality cold rolled steel, nickel plated, noiseless working hydraulic hinges for cup board / door of thickness 2.5 mm finished type complete all as specified and directed. 5 S&F PVC hinges of 100 mm long complete all as specified and directed. 6 S&F 300mm long antique finish brass handlefor door is made of aluminum & zinc alloy material with a brass antique finish, which has a strong and sturdy build that resists daily scratches, corrosion, and tarnishing and also provided long last durability complete all as specified and as directed. 7 S & F 200 mm long brass barrel tower bolts with cast or sheet barrel and rolled cast bolts and fixed complete all as specified and as directed. 8 S&F brass mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and directed. 9 S&F floor door stopper of brass body and tongue with hard drawin steel spring having overall length of cover plate 150 mm complete all as specified and directed. 10 S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all all as specified and directed. 11 M&L for cutting in stone walls built in cement mortarfor inserting hold fasts and making gooddismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required for depth of embeded portion of hold fast exc half brick and not exc one brick complete all all as specified and directed. 12 S&F for 8mm thick toughened glass of any size including cutting to shape as in windows/ventilator and fixed in frame of sliding track (three track) including necessary fittings, such as handles, sliding roller, locking arrangment complete all as specified and directed. 13 S&F for 10mm thick toughened glass of any size including cutting to shape as in door and fixed to frame/opening including necessary fittings as required complete all as specified and directed. 14 Providing and fixing factory made uPVC white colour Sliding window Three track for area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) 15 Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). (Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) 16 Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge 17 Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-inCharge. (Glass shall be paid separately) (Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) 18 Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed. 19 M&L for rendering 15 mm thick on fair faces of stone masonary in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed. 20 M&L for finishing walls with textured interior paint of required shade, design new work (two or more coats) over and including 3mm thick wall care putty applied @ 3.28 Ltrs/10 Sqm over and including priming coat of primer applied @ 2.20 Kg/10 Sqm on textured wall surface complete all as specified and directed. 21 M & L for preparation of new undecorated surfaces of ceiling and applying two coat of oil bound distemper over and including a coat of primer and 2 mm thick wall care putty complete all as specified and directed. 22 M&L for 10mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:4) finished the surface even and smooth without using extra cement complete all as specified and directed. 23 M&L for preparing newly plastered wall surface and applying two coats of oil bound distemper over and including a priming coat of alkali resistant primer with over and including 3mm thick (average) wall care putty complete all as specified and directed. 24 M&L for twocoats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed. 25 M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including beading lipping in joints or corners wherever requires complete all as per specifications and drawing and directed. 26 S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and or riveted or forged into spikes, framed, barred iron door, ladders, fencing work ect. conforming to Fe-290 Gde E-165 complete all as specified and directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account. 27 M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as per specifications and drawing and directed. 28 M&L for 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. complete all as per specifications and drawing and directed. 29 S&F Gl frame work for seamless ceiling for grid size 605x605mm comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as per specified and directed. 30 Providing and fixing factory made uPVC white color Sliding window Two track for area not exceeding 2.0 Sqm each made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) 31 M&L for 18-20mm thick Granite (of any type) (table rubbed and polished) as in steps, skirting, dado,jambs, pillars, window-cills, cooking platforms and like laid/bedded over and including 15mm thick screed bed in CM (1:4 ) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 32 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 33 Taking down chowkhats or frames with shutters (including steel/aluminium windows) ( without taking off shutters from the frames) of size Area exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed. 34 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 35 M&L for 100 mm thick PCC (1:4:8) type D2, (40 mm graded stone agg) as in sub base of floor complete all as specified and directed. 36 M&L for 20mm thick Granite (of any type) tiles machine cut in floors and kitchen plateform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete bedded over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. 37 M&L for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors over and includig screed bed or bedding layer of 20mm thickin CM (1:4) for laying floor finishes completeall as specified and directed. 38 M&L for coloured, glazed ceramic tiles size 350x250x7-8mm or 450x350x 7-8mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over 10mm thick rendering in CM (1:3) all as specified and directed. 39 M&L for powder coated aluminium three track and three shutter (of equal width) sliding type window without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings two Nos for each shutter with 4.00mm thick sheet glass for glazing shutters & stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm for wire gauge shutters usingpowder coated sections as approved by AGE(I) complete all as specified & as directed.Note :-(i) The window opening shall be provided with three shutters of equal width. (ii) Two shutters shall be glazed shutters & one shutter shall be with stainless steel wire cloth all as specified hereinbefore. (iii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window and at time the same can be utilized as partly glazed and partly gauzed window. (iv) The thickness of powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (v)Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window. 40 S&FAluminium powder coated single leaf partly glazed and partly panelled door in two panels having 12mm thick MDF board both side laminated as bottom panel & 8mm thick toughened glass on top panel on pivots alongwith hydraulic door closer (Aluminium Extruded section), Brass door lock with four levers, 02 Nos of aluminium handles of 250 mm, 01 No tower bolt 150 mm, 100 mm SS butt hinges 4 Nos & all connected accessaries with rubber beading and glazing clips and usingpowder coated sections as approved by AGE(I) complete all as specified & as directed. Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by AGE (I). 41 S&F welded steel wire fabric of weight exceeding 4kg per sqm fixed to wood or steel members complete all as specified & as directed.
