|
| 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as directed. |
| 2 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing given in SSR complete all as spfd and directed. |
| 3 | S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing given in SSR complete all as spfd and directed.Note :- PVC fillets & PVC strips shall be measured and paid for separately. |
| 4 | S&F false ceiling with 10mm thick plaster of paris board (Gypsum anhydrouse) of size 600x600mm with machine screws on and including GI channel 18 gauge thick grid work, main pst placed at 750mm, cross joints placed at 450mm centre to centre, hanging with 6mm dia GI wire suspenders from roof, J hook bolts and nuts etc and treating POP sheets with thin layer of POP with gypsum anhydrouse binder and preparing surface till a smooth surface is achieved and applying two coat of plastic emulsion paint over a coat of primer matching with colour of ceiling sheets complete all as specified and as directed. |
| 5 | Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and directed. |
| 6 | M&L for 15mm thick rendering with cement mortar (1:4)on fair faces of brick work in two layers (10mm& 5mm) seperately mixed with water proofing compound in top layer as per manufacturer\"s instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 7 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 8 | M&L rendering 10mm thick plaster on other than fair faces of brick or concretesurfaces in CM (1:6) finished the surface even and smooth without using extra cementcomplete all as specified and directed . |
| 9 | Material and Labour for preparing newly plastered surfaces and applying two coats of white wash on walls complete allas specified and as directed. |
| 10 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as spfd and directed. |
| 11 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 15 mm thick 1:6 complete all as specified and as directed. |
| 12 | M&L for Non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but notexceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar (1:6), all as specified & as directed. |
| 13 | M&L for glazed ceramic colour walls tiles in vertical surfaces 7-8mm thick of size 350x 250x 7 mm/ 450X 350X 7mm set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering backing coat on vertical surface of wallin 10 mm thick cement mortar (1:4) complete all as specified and as directed. |
| 14 | M&L for 18-20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in over and including20mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary dismantling of existing unserviceable one complete all as specified and as directed. |
| 15 | M&L for rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed. |
| 16 | Supply and fixingin repair PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as directed. |
| 17 | Takingup or down 15 mm bore GIpipe and connection complete all as specified and as directed. |
| 18 | M&Lfor15 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floorscomplete all as specified and directed. |
| 19 | Takingup or down 20 mm bore GIpipe and connection complete all as specified and as directed. |
| 20 | M&Lfor20 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floorscomplete all as specified and directed. |
| 21 | S & F in repair, 10 ltr capacity PVC valve less, syphonic action type,flushing cistern, low level, withinlet ball valve, float and brackets includingflush pipe and PVE connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as specified and as directed. |
| 22 | Supply and fixing in repairs coloured plastic water closet seatcover, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 23 | Supply and fixing Hand Shower ABS body (Health Faucet) with 8mm dia 1.2 metre long flexible tube with wall hook complete all as specified and as directed. |
| 24 | Supply and fixing in repairs 15 mm dia Bib cock fancy type with chromium plated screwed down,screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 25 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)complete all as specified and as directed. |
| 26 | S & Fin repairs vitreous China wash basin, white, flat back, single 550 x 400mm excluding taps, waste pipe, chain and plug and porcelain stopper but includingbrackets, waste coupling, short connection pipe complete all as specified and as directed. |
| 27 | S&F in repair 15 mm bore pillar taps,fancy type cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 28 | Supply and fixing in repair 600 x 450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed |
| 29 | Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia,D Type 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (mimimum weight 190 gms), complete all as specified and as directed. |
| 30 | S & F in repair brass chromium plated shower rose 125mm size with or without swivel joint including fixing to steel pipe or union complete all as specified and directed. |
| 31 | Supply and fixing as in repairscast Copper alloy, chromium plated, fancy type, 15 mm bore angular stop valve with wall flange,screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 32 | Supply and fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 33 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and as directed. |
| 34 | S & F in repair 32 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as in waste pipe laid in trenchescompleted all as spd and directed. |
| 35 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 36 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heatmoulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail;Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cementcomplete all as specified and as directed. |
| 37 | Supply and fixingSolid PVC Door Frame of size 50mm x 47mm made out of 5mm Prelam colour PVC sheet & edges painted to match with prelam sheet reinforced with M.S. Square tube, & fixing in opening complete asper specification & drawing as specified in SSR Part I, Section 8 and as directed. |
| 38 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paidseperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 39 | Supply and fixing 4mm thick frosted one side sheet glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed. |
| 40 | Supply and fixing in repair 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to timber frame work complete all as specified and as directed. |
| 41 | Supply and fixingcontinuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap (when open) 30mm complete all as specified and as directed. |
| 42 | Supply and fixingof ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 43 | Supply and fixingofstainlesssteel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 44 | Supply and fixing200 mmlong Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 45 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 46 | Supply and fixing100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 47 | Supply and fixingof aluminium door closer hydraulicallyregulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 48 | Supply and fixingof brass mortice lock, vertical type, size 100 mm, 4 Levers with escutcheon plates & two keyscomplete all as specified and as directed. |
| 49 | Supply and fixingof 140mm (overall length of cover plate), floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 50 | Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as directed. |
| 51 | Supply and fixingof clean sawn timber of second class hardwood in scantlingfixed as in purlins rafters etc complete all as specified and directed |
| 52 | M&L for 75mm PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/ paving finish even and smooth without using extra cement,including joint filling with bituminus filler of grade 82/25 grade complete all as specified and directed. |
| 53 | Supply and fixing anodized aluminium snap grid frame work for false ceiling, size of grid 605mm x 605mm complete all as specified & as directed. |
| 54 | M & L for 4 mm thick, Non asbestos fibre cement building boards fixed in ceiling or laid/ inserted to timber/GI/Aluminium frame work with screws, etc complete as specified and as directed. |
| 55 | Supplyand fixing Prepainted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 56 | S&F Mild steel framed work in tubular trusses and tubular posts using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. with and including one shop coat of zinc chromate primer paint complete all as specified & as directed. |
| 57 | M&L preparation of new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and as directed. |
| 58 | Supply and fixing100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 &ISI marked complete all as specified and directed. |
| 59 | Supply and fixing150 mmlong Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 60 | Supply and fixingstainless steel curtain rod of 25 mm dia thickness not less than 0.75mm, including decorative stainless steel curtain holding braket and decorative stainless steel finial end cap suitable for curtain rod of25 mm dia fixed in walls with screwswith 6 Nos of curtain ring per RMcomplete all as specified and directed. |
| 61 | S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specifiedand as directed. |
| 62 | Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed. |
| 63 | Materials and labour for Brick work with sub class \"B\" bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed. |
| 64 | Material and Labour for preparing newly plastered surfaces and applying two or more coats of Acrylic Smooth exterior paint of required shade : New work @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. |
| 65 | Material and Labour for preparation of newly plastered surfaces of wall and applying twocoatsof water based acrylic distemper over a coat of primer over a coat of 1mm thick wall care puttycomplete allas specified and as directed. |
| 66 | Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-Iincluding dismantling of old existing water tank and removing from site complete all as directed. |
| 67 | Supply and fixing 500 liters rotational moulded polyethylene water storage tank, multi layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-Iincluding dismantling of old existing water tank and removing from site complete all as directed. |
| 68 | Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe and including taking down old unserviceable pipe complete all as specified and as directed. |
| 69 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to floor for 110 mm bore of pipe complete all as specified and directed. |
| 70 | Supply & fixing as in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and as directed |
| 71 | S & F in repair 40 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as in waste pipe laid in trenchescompleted all as spd and directed. |
| 72 | E/M PORTION |
| 73 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed. |
| 74 | Material & labour for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathedFRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC Concealed conduit,medium grade minimum 20 mm dia ISI marked and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete andmaking good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.2 mm MS sheet, 3mm thickModular top cover for mounting of modular fittings,switches,sockets outlets,regulators etc and provisining of 1.5 sqmm PVC insulatedunsheathed FRLSH cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for the following :- |
| 75 | One light/Fan/Bell point controlled by one one/way switch complete all as specified and as directed. |
| 76 | One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed. |
| 77 | One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size. |
| 78 | All as per item No.3 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 6 pin 6/16 Amps switch socketcombination on independent board. |
| 79 | S&F Modular switchone way 10 Amp ,1 module,240 Volts complete all as specified and as directed. |
| 80 | S&F Modular socket, 2/3 pin combined 2 module, 6 Amps, 2 module240 Volts complete all as specified and as directed. |
| 81 | S&F Modular switchone way, 16 Amp,1 module, 240 Voltscomplete all as specified and as directed. |
| 82 | S&F Modular socket, 2/3 pin combined 2 module, 6/16 Amps, 2 module240 Volts complete all as specified and as directed. |
| 83 | S&F ceiling rose surface bakelite two to three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and as directed. |
| 84 | S&F modular fan step regulator, 100W, 2 Module A/C 240 Volts complete all as specified and as directed. |
| 85 | Supply and fixing as in repair LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 86 | Supply and fixing as in repair LED luminaire 300 mm x 300 mm, 18 watt, 220 V AC recessed mounted inverted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 87 | Supply and fixing as in repair round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed |
| 88 | Supply and fixing Lamp holder PVC polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and as directed. |
| 89 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 90 | Material & labour for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 20mm dia rigid non metalic PVC concealed conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathedincluding taking down old submain wiring of any type, complete allas specified and as directed.NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of concealed conduit with accessories shall be measured as one length. |
| 91 | Supply and fixing as in repair factory made board distribution in sheet steel enclosure double door glazed with 200 Amps ratedbus bar, SPN, 12 ways, 240 Volts suitable for housing MCBs.complete all as specified and as directed. |
| 92 | Supply and fixing as in repair factory made board distribution in sheet steel enclosure double door glazed with 200 Amps ratedbus bar, SPN, 8 ways, 240 Volts suitable for housing MCBs.complete all as specified and as directed. |
| 93 | Supply and fixingin repair MCB, TPN, 415 volts, \"B\" Curve, 40 to 63 Amps, 10 KA complete all as specified and as directed. |
| 94 | Supply and fixingin repair MCB, SPN, 415 volts, \"B\" Curve, 40 Amps, 10 KA complete all as specified and as directed. |
| 95 | Supply and fixingin repair MCB, SP, 240 volts, \"C\" Curve, 10 to 32 Amps, 10 KA complete all as specified and as directed. |
| 96 | Material and labour for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 25×4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SI Part I all as specified and testing on completion includingprovisionof earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc including taking down old earthing complete all as specified and as directed.Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m. |
| 97 | Supply and fixing ceiling fan complete with brushless direct current (BLDC) motor class of insulation B, power factor not less than 0.9, service value (CMM/W) minimum 6.85 air delivery not less than 230 cum/min, 350 RPM (tolerance as per IS 374-2019), THD less than 10% including remote and electronic regulator unit for speed control and all remaining accessories including safety pin, nuts, bolts, washer, temparturerise =75 degree C (maximum), insulation resistance more than 2 megha ohm suitable for 230V, 50Hz, single phase AC, complete all as specified and directed. |
| 98 | Supply and fixing exhaust fan, heavy duty, metal body, complete with three blade and louvers shutter, voltage 230V, 50Hz, 1200 RPM, copper winding 450mm sweep complete all as specified and as directed.The quoted rate deemed to be included cutting suitable hole and making good the surface after cutting the hole, painting plastering etc. |
| 99 | Supply and fixing electric water heater (Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.vertical type, digital temperature displayed with suitable size of fastener and including provision and connected up up of SS braided pipe with adoptor for inlet and outlet water connection, copper element corrosion resistant antisaling magnisium anode, having adjustable knob for temperature control and inner tank material of supirior glass line coating/coating with single weld line tank and outer body material, ABS with high pressure withstand capacity upto 8 bar pressure, multiple safety system for protection against dry heating, over heating and over pressure, IPX4 water proof technology for longer product life having heating element 2 KW and minimum 2 year warranty on product and minimum three year warranty of heating element and 5 year warranty of tank complete all as specified and as directed. |
| 100 | Supply and fixingSingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 32 Amp rated capacitycomplete all as specified and as directed |
| 101 | Material & labour for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 20mm dia rigid non metalic PVC concealed and conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed including taking down old submain wiring of any type, complete all as specified and as directed. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 102 | Material & labour for sub main wiring using two single core 10 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 20mm dia rigid non metalic PVC concealed and conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 10 Sqmm earth wire, PVC insulated & unsheathed including taking down old submain wiring of any type, complete all as specified and as directed. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 103 | Supply, laying, jointing including testing of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable 16Sqmm x 4core, heavyduty, with aluminium conductor, 1100 Volt grade,laid in treanchs/ ducts/ along wall / under road etc complete all as specified and directed. |
| 104 | Excavating in trenches. n exc 1.5 m wide and n exc 1.5 m in depth ; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting put complete all as specified and as directed. |
| 105 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cmcomplete all as specified and as directed. |
| 106 | Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 107 | Supply and layingdry river sand cushioning for cable protection with a layer of 8cm deep before laying and 15cm after layinggentlypunned down to 10 cm on top of the cable as per SSR Part-I complete all as specified and as directed. (Note : Punned thickness shall be measured). |
| 108 | Material and Labour for bricks common burnt clay, building brick, sub class B designation 75 old size bricks laid in trenches flat over sand cushioning for cable protection complete all as specified and as directed. |
| 109 | Supply and fixing as in repair LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 110 | Supply and fixing LED tubelight fitting mirror type with high out put diffuser 2 feet, 5W, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 111 | Supply and fixing as in repair factory made board distribution in sheet steel enclosure double door glazed with 200 Amps ratedbus bar, SPN, 4 ways, 240 Volts suitable for housing MCBs.complete all as specified and as directed. |
| 112 | Supply and fixing exhaust fan, heavy duty, metal body, complete with three blade and louvers shutter, voltage 230V, 50Hz, 1200 RPM, copper winding 300mm sweep complete all as specified and as directed. |
| 113 | Supply, laying, jointing including testing of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable 35Sqmm x 3.5core, heavyduty, with aluminium conductor, 1100 Volt grade,laid in treanchs/ ducts/ along wall / under road etc complete all as specified and directed. |
| 114 | Supply, laying, jointing including testing of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable 16Sqmm x 34core, heavyduty, with aluminium conductor, 1100 Volt grade,laid in treanchs/ ducts/ along wall / under road etc complete all as specified and directed. |
| 115 | Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 116 | Supply and fix sheet metaldistribution board 415volt, Vertical TPN 8 Way with provision for DHx100 series MCCB of 63 Amp 4 pole and provided with CRCA sheet steel powder coated double door rfeady to use DBs provided with insulated vertical phase bus bar, neutral bar, earth bar, sticking saddle, colour coded inter connecting wire set, cable ties, balnket plates etc for IP 43 & IP 54 DB\"s protection complete all as specified & as directed. |
