Tender For B/R & E/M Repair And Services For Pocket A & C ,B & H Under Ge (N) Akhnoor; 1 Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc all as specified and directed. 2 Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. 3 Rendering 15mm thick on fair faces of brick work or cement concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed. 4 Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed. 5 Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. 6 Brick work with old size sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified. 7 Description all as per item No.06 above, but except bricks, all as specified and directed. 8 Brick work with sub class B brick straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and directed. 9 Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. 10 Preparation of newly plastered surfaces of ceilingand applying three coat of white wash, complete all as specified and directed. 11 Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. 12 Preparation of new treated surfaces and apply two coat of oil bound distemper to walls over one coat of chalk whitening primer complete all as speicfied and directed. 13 Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of oil bound distemper complete all as specified and as directed. 14 Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of cement base paint white or tined on wall complete all as specified and as directed. 15 Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. 16 PCC 1: 2 : 4type B-1 ( using 20mm graded crushed stoneagg.) 40mm thick as in floor finishing surfaces of conc topping even and smooth without using extra cement . And base of water storage tanks,including necessary form work for rough finished surfaces etc. 17 50mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in bays n.exc 2.00 Sqm complete including finishing the surface of concrete topping even & fair. The joints shall be filled with mastic filling, complete all as specified and as directed. 18 75mm thick PCC (1:3:6) type C-1 (using 40mm graded stone aggregate) as in PCC path complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed. 19 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 20 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub floor under tiles, complete all as specified and as directed. 21 Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in cement and sand mortar 1:6,complete all as specified and directed. 22 ditto all as per item No 21 but in skirting over and including 10mm thick rendering in CM 1:4 23 Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick back coat layer plaster in cement mortar 1:4,complete all as specified and as directed. 24 Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. 25 Description all as per Item No 24 here-in-before, but in skirting/dado over and including 10mm thick rendering in CM 1:4. 26 Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons,walls etc, complete all as specified and directed. 27 20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed.Note:-(Size of Kota Stone slab shall be 52 cm x 52 cm). 28 Description all as per Item No 27 here-in-before, but in skirting/dado over and including 10mm thick rendering in CM 1:4. 29 20 mm thick makrana white marble as in border/cooking platform etc, bedded and jointed over20mm thick screed in cement mortar 1:6including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed. 30 Dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed. 31 Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed. 32 Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified. 33 Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. 34 Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. 35 Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including ceiling framework, complete all as specified. 36 4mm thick prelaminateddesigner ceiling board over & including GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm fixed along wall perimeter, main runner Tof size 25x40x3mm , secondary runner T of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/cof ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels, complete all as specified and as directed. 37 Vitreous china squatting pan Orissa Pattern size 580 x 440 mmin white colour with integral foot rest incl lime mortor, S trap fixed in repairs complete all as specified and directed.Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE. 38 Vitreous china wash down water closet pan pedestal pattern including seat cover white excluding flushing cistern and flush pipe fixed in repairs complete all as specified and directed.Cat Part No. 20086 (P-18) of Hindware (Model-Malibu) or its equivalent in Supreme, Parryware, Polytuff & Commander. 39 PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe etc. fixed in repairs,complete all as specified and as directed. 40 Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs, complete all as specified. 41 Vitreous china wash basin, white, flat back, size 550x400mm with full padestal with & including CP basin mixer including waste pipe porcelain stopper a pair of CI brackets fixed in repair complete all as specified and as directed by Engineer-in-Charge.Cat Part No-10100 of Hindware for Wash basin or its equivalent cat part of make specified in list make as approved by GE. 42 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs, completeall as specified and as directed. 43 PVC connection 15 mm size, of length 450 mm, with PTMT nuts fixed in repairs, completeall as specified and as directed. 44 Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed. 45 Description all as per item No. 44 above but 20 mm bore. 46 Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified. 47 Description all as per item No 46above but 20mm bore. 48 16mm outer dia ofCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors, complete all as specified and as directed. 49 20mm outer dia ofCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors, complete all as specified and as directed. 50 Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings, complete all as directed. 51 Description all as per item No. 50 above but 20 mm bore. 52 Angle/ Stop valves (Concealed type), cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15mm bore pipe fixed in repairs, complete all as specified and directed. 53 Bib taps15mm, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm fixed in repairs,complete all as specified and as directed. 54 Pillar taps 15mm bore cast copper alloy CP, fancy type with capstan head with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut fixed in repairs, complete as specified and as directed. 55 Chromium plated cast copper alloy Health faucet with one mtr long stainless steel flexible tubeand wall hook fixed in repairs, complete as specified and as directed. 56 Plastic water closet seat cover white closed patternwith flat bottom and cover including chromium plated hinges device fixed in repairs,complete all as specified and as directed. 57 Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe20 mm dia (minimum weight 210 gms) fixed in repairs, complete all as specified and directed. 58 Plate rack made of stainless steel 0.8mm thick overall size 786mm x 610mm x 254mm fixed in repairs complete all as specified and directed. 59 Brass chromium plated fancy type wall mixture for mixing hot and cold water supply screwed down incl connecting leg & wall flange for iron pipe 15mm bore fixed in repairs all as specified and directed 60 Stainless Steelsinks with drainage board made of stainless steel (1mm thick) kitchen or laboratory with plugs,washers and wastes pipes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets fixed as in repairs and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. Make of Prayag of its equivalent of the makes to P.S. as approved by GE. 61 20mm bore gun metal glove or gate valve with iron wheel head screwed bith end for iron pipe and fixed in repairs,complete all as specified and as directed. 62 Rotational moulded polyethylene water storage tanks of 1000 litres capacity,three layered and white in colour(cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. 63 Rotational moulded polyethylene water storage tank 500 litres Capacity, three layered and white in colour(cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. 64 Taking down chowkhats or frameswith shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed. 65 Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and as directed. 66 Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and directed 67 Taking down and refixing incl resecuring and easing shutters areaexceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed. 68 Pressed steel frames of sizes 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia threshold bar and filling hollow of frame,all as specified and directed. 69 Pressed steel frames of sizes 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia threshold bar and filling hollow of frame ,all as specified and directed. 70 Plain Cement Concrete 1:2:4 type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame complete all as specified. 71 PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate for hold fast blocks, including necessary form work, complete all as specified. 72 35mm thick, 2nd class soft wood glazed & skelton factory made shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plan, chamfered or rounded fitted with cuts and metred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section-8, Clause 8.20 (a) complete all as specified and as directed. 73 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified. 74 Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing. 75 Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading andjointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed. 76 Aluminium powder coated sliding window,chowkat of size 63mm x 40 mm x 1.3 mm thickwith aluminium powder coated two track frame of size 63 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thickscrewed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel includingnecessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mmcomplete all as specified and as directed. 77 Aluminium powder coated sliding window,chowkat of size 92mm x 40 mm x 1.3 mm thickwith aluminium powder coated three track frame of size 92 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thick screwed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel includingnecessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grillfitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed. 78 Aluminium powder coated door shutter with powder coated frameof size 65mm x 50 mm x 1.6 mm thick fixed with hinges and shutter with top rail,bottom rail, middle railand style of size 85mmx 44mm x 1.6 mm thick with 200mm size aluminium handle on both side of shutter aliminium tower bolt 150 mm long 2 Nos per leaf including 5.5 mm thick selected quality , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed hydraulic door closer for each leaf , mortic lock 4 levers with 2 Nos key , 3Nos butt hinges of stainless steel for each shutter including provn of 8 mm dia nut and bilt on both side of top rail and bottom rail complete all as specified and as directed. 79 Powder coated aluminium door/ partition sections with standard aluminium sections for frame work, for glazed shutters, partitions, ventilators with one or more rebates including joiining cleats, aluminium beadings etc for fixing etc. complete all as specified. 80 Powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (glass & wire mess shall be measured and paid separetely)including necessary joining cleats, glazingrubber packing, anodised aluminium clips, snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 N.) and 100 mm long aluminium tower bolt (02Nos) per shutters complete all as specified 81 Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed. 82 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed. 83 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed. 84 Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed. 85 Door closer of aluminium (Die cast body), hydraulically regulated,designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed. 86 Aluminium mortice lock (4 levers) 100 mm long vertical type fixed in repairs, complete all as specified and as directed. 87 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed. 88 25 mm dia stainless curtain roadcomplete with stainless bracket and side caps fixed in positionby drilling holes in walland fixed the bracket with rawl plug and SS screw fixed in repairs, complete all as specified and as directed. 89 Taking down eaves gutters and PVC(SWR) pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. 90 110 mm diaPVC (SWR) Type-B pipes single socketed in any length with rubber ring joint laid in trenches or in floor all as specified and directed. 91 110 mm diaPVC (SWR) Type-B pipes single socketed in any length with rubber ring joint fixed to wall with PVC/MS holderclamp all as specified and directed 92 75 mm diaPVC (SWR) pipe single socketed in any length with rubber ring joint laid intrenches or in floor all as specified and directed 93 75mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC/MS holderclamp etc complete all as specified and as directed 94 PVC SWR reducer 110mm to 75 mmcomplete all as specified and as directed, 95 PVC SWR vent cowl75 mmcomplete all as specified and as directed. 96 PVC (SWR)bend 110 mm dia any radiusall as specified and directed 97 PVC (SWR)junction single (single T) equal or unequal provided with access door 110 mm diaall as specified and directed 98 PVC (SWR)bend 75 mm dia any radiusall as specified and directed 99 PVC (SWR)75 mm dia floor trap plain with grating including jointing with solvent cement fixed in repairs, all as specified and directed 100 PVC (SWR)junction single (single T) equal or unequal75 mm diaall as specified and directed 101 Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes window shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame withside hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 8mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1302/2009 Sh No 1/1 to 1/3 . 102 -Ditto- all as per item No 101 above but without glazing bars and without grill/guard bar. 103 Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium framesincluding punching or drilling out old glazing pins/spring clips complete all as specified and as directed. 104 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. 105 3 mm thick sheet glass figured (frosted), ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. 106 5.5 mm thick tinted sheet glass, selectedquality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane, complete all as specified and as directed. 107 4 mm thick tinted sheet glass, selectedquality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane, complete all as specified and as directed. 108 Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. 109 Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed. 110 Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed. 111 Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paintof Ist quality over a coat of pink primer,complete, all as specified. 112 Preparation ofold steel surfaces of any descriptionexc 10 cm width or girth, and applying one coats of synthetic enamel paint complete all as specified and directed. 113 Preparation of old wood or wood basedsurfaces of any description not otherwise described over 10 cm in width or girth, and appying one coat of synthetic enamel paint complete all as specified and as directed. 114 Taking down and refixing in the same position of aluminium door shutters of any size and description and making functional by way of repair/ replacement of floor spring, hinges, lock, rubber packing etc as required complete all as specified and as directed. 115 Sunken Floor treatment :- Providing and laying of water proofing treatmentto sunken portion by applying cement slurry mixed with acralic based polymer modified cementitious composite compound of make as approved including demolition and filling of sunken floor by PCC 1:5:10 (Using aggregate).(a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours.(b) Second layer of slurry of cement Q 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/ Sqm his layer allowed to air cure for 4 Hours. Note :- 1. Concrete for sunken slabs shall be mixed with WP compounds asmanufacturdrs instructions before carrying out water proofing treatment the sunken slabslab shall be tested with water for 48 hrs for any leakage/dampeness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested ( Water proof compound rate is superatly.2. 50mm thick PCC at the bottom of slab and slopeshall be 1:20 toward the corner of outer wall and GI pipe of 50mm dia (Med grade) be inserted at corner projecting outside 20 cm . 3.15 mm plaster mised with WP Compound shall be provided while concrete is green. 4.Only floor area shall be measured for payment purpose. 116 Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power)complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed 117 Materialand labour for point wiring complete with 1.5 sqmm PVC insulated, FRLStype, ISI marked,conforming to IS-694/1990 unsheathed,multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawn through and including PVCConduit 20 mm dia medium grade andincluding cutting, chasing work at any height and all accessories are concealedinwalls / roofs / floors / ceiling etc. metal flush boxwith top,bottom,side/back wall knockout for conduitentry from any direction made out of 1.60mm thick suitable for fixing ofmodular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved colouresandincluding 1.5 Sqmm PVC insulated multistranded FRLStype unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providingputty and white cementfor smooth finishing of existing surfacecomplete all as specified and directedfor the following:- 118 One light point/fan /bell pointcontrolled by oneswitch. 119 One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . 120 One 5 pin 6 amps socket point controlled by one 6 amps switch on same board . 121 All as per item No 2 (b) above but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:- (a) One 6 Pin 16/6 amps socket outletr point controlled by one 16 amps switch on independent board. 122 Modular type switch 10 Amps, single pole,1way,1/2 module,240V, ISI Markedcomplete all as specified and directed. 123 Modular type switch 16 Amps, single pole, 1way,1 module, 240V, ISI Marked Complete all as specified and directed.Make- Crabtree (Havells) or its equivalent in Anchor(Roma), Legrand, Seimens as approved”. 124 Modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module, 240V, AC ISI Marked Complete all as specified and directed. Make-Crabtree (Havells) or its equivalent in Anchor (Roma), Legrand, Seimens as approved”. 125 Modular type socket 16 Amps, 2/3 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI MarkedComplete all as specified and directed . Make-Crabtree (Havells) or its equivalent in Anchor (Roma), Legrand, Seimens as approved”. 126 Angle lamp holder, insulated body with back plate for LED lamp including removing old unsv itemcomplete all asspecified and directed. 127 Ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed 128 LED light fitting 1x20W, 4 feet, 220V, general purpose surface and wall mounted LED batten with aluminium housing integrated electronic driver LED fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose as approved by GE fixed in repairs complete all as specified and directed.LUMILINEOBS20WLED840SPCWH of Havells or equivalent cat part of make HPL, BAJAJ, SURYA, BENLO as approved by GE. 129 LED light fitting 1x10W, 2 feet, 220V, general purpose surface and wall mounted LED batten with aluminium housing integrated electronic driver LED fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose as approved by GE fixed in repairs complete all as specified and directed.LUMILINEOBS20WLED865SPCWH of Havells or equivalent cat part of make HPL, BAJAJ, SURYA, BENLO as approved by GE. 130 LED INVERTER batten with square profile and poly carbonate channel lithium ion battery with charging time 8 to 10 hours and backup time upto 4 hoursand connecting up with twin core twisted copper wire from LED fitting to ceiling roseand removing old unserviceable fitting complete all as specified and directed.Make :- Pride plus inverter batten 4 feet, 20W 6500K of Havells or equivalent in Bajaj, Surya, Wipro as approved by GE. 131 LED bulb 12 watts, 240Volts,50Hzpin type andincluding removing old unserviceable itemcomplete all as specified and directed.Cat Part No-LHLDEUEEML8R012 Havells or its equivalent in Bajaj, Surya as approved. 132 LED secruity light fitting of capacity25 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith suitable inbuilt surge protector and cable connection from ceiling rose to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make-HavellsCat Part No-ENXTP25L WH PO PC SD of Bajaj or its equivalent in Havells or Wipro as approved by GE. 133 Supply & fixing and in repair sheet metal enclosure acrylic door 240 volts AC,SPNdistribution board 8 way suitable for flush mounting with 100amps copper busbar,neutral bar,earth barand MCB incomer of rating upto 100Amps ,MCB SPN/DP,and MCB SP as outgoing and complete connecting cable linkswith top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat No. 5076 21 8 way / Hager Cat Part No.VYS04G / L&T Cat Part No-DBSPN004GD as approved by GE. 134 MCB SP 6 to 32 Amps 10 KA,C series,AC,240Volts,50Hz , ISI marked fixed in repairs complete all as specified and directed.Make:- Legrand cat No.4085 87 to 4085 95 / Hager Cat Ref No.NCN106N to NCN132N / Havells Cat No.DHMGCSPF006-032as approved 135 MCB single pole & neutral 40 to 63 amps 240 volts 10 KA C series fixed in repair, complete all as specified.Make:-Havells cat part No-DHMGCSPF040or its equivalent cat part of make-Legrand / ABB / L&T as approved by GE 136 Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipeof 15 mm diafrom earth electrode up to test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6CM with Reinforcement bars of 8mm dia @120mm c/c excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required valueincluding removing old item completeall as specified and directed. 137 Exhaust fansingle phase metal body, AC 230 Volt, 50 Hz, 900 RPMof size 300mm sweep with louvers shutter complete with all accessories including connecting up from ceiling rose complete all as specified and directed. Make:- Cat part No:- Turbo Force 1P Grey of Havellsor its Equivalent cat part of make-BAJAJ,CROMPTON GREAVES, GEC, KHAITAN,ORIENT as approved by GE 138 Sub main wiring complete with 2 runs of 6 sqmm single core copper conductor (ISI marked)cable1100 volts grade,FRLS type, PVC insulated, unsheathed, flexible, multi strandedcolour coded cables drawn throughrigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLStype as earth continuity conductor connected to common earth dollyincluding making good the disturbed surfaces to match with existing surface including taking down of old existing submain cable complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. 139 Ceiling fans complete with blades. Down rods, electronic regulator and accessories, 230 volt, 1200mm sweep, min air delievery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) incl taking down existing and deposit with MES all as specified and directed. “Cat Part No Zinger Make Havellsstandard or its Equivalent in Orient, Usha.” 140 Vertical double door TPNin replacementare fitted with Bus bar neutral link, blanking plates of 4 way(4+12) with suitable for incomming MCCB 4 poleG frame,having isolated neutral bar, mechanical impact strength IK09, door earthing suitable for MCCB upto 125 Amp, complete all as specified.Make:-Havells Cat part No:- DHDLVDRWGOFO04or its Equivalent cat part of make of Legrand / ABB / L&T as approved by GE. 141 MCCB 04 pole 415 volts 16 KA, 63 Amp adjustable thermal & fixed magnetic setting type suitable for TPN vertical loadline DB mentioned at ser No 15 here in before fixed in replacement, complete all asspecified.Make : Havells Cat part No IHDA3BBF0063 or its Equivalent cat part of make of Legrand / ABB / L&T as approved by GE.. 142 Repairs sheet metal enclosure acrylic door 240 volts AC,SPNdistribution board 12 wayfor flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP,and MCB SP as outgoingcomplete connecting cable linkswith top and bottom removable gland plates withIP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coatall as specified and as directed. Make:- Legrand cat No. 5076 22 12 way / Hager Cat Part No.VYS12G / L&T Cat ref:-DBSPN008GD as approved. 143 Fan regulator modular type electronic compatible with BLDC fan, stepped type 100 Watts, 2 module 240Volts, AC ISI marked complete all as specified and directed.“Cat part No:- Crabtree (Havells) or its equivalent cat part of makeAnchor, Legrand, Schneider as approved by GE”. 144 Electric bell ding dong type 230 volts AC supply 50 Hz complete all as specified and directed. 145 Modular Bell push 6A 1 module, 240V, ISI Marked Complete all as specified and directed.“Cat part No ACVSBXW061 of Crabtree (Havells) or its equivalent cat part of makeAnchor, Legrand, Seimens as approved by GE”. 146 Socket outlet 3 Pin, 16 Amp, flush type all as specified and directed 147 Socket outlet 3 Pin, 6 Amp, flush type all as specified and directed 148 Switch Socket combination 2 in 1, 6A flush type all as specified and directed. 149 Switch Socket combination 3 Pin, 16A flush type, 5 in 1 all as specified and directed. 150 LED in replacement of light fitttting 1x9W/1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size
