Tender For Repair To Sanitary And Kitchen Of Md Accn At Jalipa Mil Stn Under Ge A Barmer.; 1 Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed 2 Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. 3 M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mmin any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. 4 M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6for laying floor finishes complete all as specified. Note : Work will be in patches or in bulk 5 M & L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. 6 All as per Sl item No. 5.00 here-in-above, but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. 7 M & L for Single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified. 8 All as per Sl item No. 7.00 here-in-above, but as in skirting over cement mortar backing plaster in CM1:3 10mm thick 9 Taking down cement or cement lime plaster, any description on brick or stone/block walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear for plastering complete all as specified and as directed. 10 M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, stone masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed. 11 M&L for rendering 5mm thick plaster in CM (1:3) onfaces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed. 12 M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of interior wall primer over 1.0mm thick wall care putty complete all as specified and directed. 13 M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. 14 M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. 15 M&L for preparing old plastered or unplastered surfaces of walls including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of oil bound distemper/ emulsion complete all as specified and directed. 16 M&L for preparing old plastered or unplastered surfaces of walls including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of white wash complete all as specified and directed. 17 M&L for preparing old plastered or unplastered surfaces of ceiling, including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of white wash complete all as specified and directed. 18 S&F in repairs 16mm bore of CPVC of food grade pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. 19 S&F in repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. 20 S&F in repairs including disconnecting tanks ,1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 21 S&F in repairs including disconnecting tanks ,S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 22 S&Fin repair 20 mm bore ballvalves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. Make: Prayag & equivalent. 23 All as per item No 22 above here-in-before but 25 mm dia complete all as specified and directed.Make: Prayag equivalent. 24 M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, fixed in repair. 25 S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floorsetc complete. 26 S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door all as specified and directed 27 S&F in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequalwith access door all as specified and directed 28 S&F in repairs PVC (SWR) bends 75 mm dia any radiusall as specified and directed 29 S&F in repairs PVC (SWR) bends 110 mm dia any radiusall as specified and directed 30 S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floorsetc complete. 31 S&F in repairs PVC (SWR) bends 110 mm dia any radius with access door all as specified and directed 32 S&F in repairs PVC (SWR) junction single,(Single T) 110mm dia equal or unequalwith access door all as specified and directed 33 M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat@1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 20mm thick in CM (1:4) mixed withWPC Conplast - 421, area of floor upto 6.00 sqm complete all as specified and as directed. 34 M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat@1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 20mm thick in CM (1:4) mixed withWPC Conplast - 421, area of floor for kitchen/WHB trap upto 0.25Sqm complete all as specified and as directed. 35 Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for 36 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles inall as specified 37 M & L for Providing precast cement concrete solid building blocks or slabs 10cmthick (with plain or interlocking joints as directed) in PCC 1:3:6 type C1 using 20mmgarded aggregate and setting in mortar 1:4 complete, in walls 38 Use and waste of form work to sides and soffits of shelves, cooking platforms etc rough finished surfaces 39 M&L for RCC 1:2:4 type B1 using 20mm graded aggregate as in shelves, kitchen platforms etc all as specified and directed 40 M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed 41 M & L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, including hole set and jointed in cement slurry over & including screedof 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified .Note : Single piece should be used in steps/cills/jambs/shelvesor equivalentas approved by accepting officer. 42 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. 43 M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointedwith grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed.Note : Work will be in patches or in bulk 44 M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thickcement plaster 1:3jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed. 45 M&L for Kota stone slab 20-25mm thick (in single piece as vertical support and horizointal base for granite top) laid over 15mm thick screed bed in cm 1:6in cooking platform, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed. 46 Dismantling wall and ceiling boarding of any description, thickness including cover fillets,particle board of any description complete al as specified and directed. 47 S & F kitchen cabinets MDFpre laminated board 18-19 mm thick of any size provided with shelves, partitions and glass shutters with stainless steel ISI markedfittings as cabinet hinges (02 Nos in each shutter),moving drawer channel (02 Nos in each shutter) handles (01 No in each shutter ), fancy Knobs (01 No in each shutter) & magnetic locks and any other fittings required, shape/pattern complete all as specified &directedby Engineer -in -Charge all as specified &directedby Engineer -in -Charge. Note : All fittings are required in making of cabinet must be make of Godrej/Hettich/Lifetime or equivalent make Kitchen Fittings ISI marked. 48 S & F Perforated Cutlery Basket with 4mm dia 100 % stainless steel, non - magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism capable of holding plates, cup, saucers, bowls and dongas with 420x485x100 mm ofcarcass complete all as specified &directedby Engineer -in -Charge. Make : Prod code No. 6133 of Godrej or equivalent make in Hettich/Lifetime 49 S & F Thali-Plate Basket baskets with 4mm dia 100 % stainless steel, non - magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism capable of holding plates, cup, saucers, bowls and dongas with 420x485x200 mm ofcarcass complete all as specified &directedby Engineer -in -Charge. Make : Prod code No. 6138 of Godrej or equivalent make in Hettich/Lifetime 50 Supply & fixedin repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracketof overall size 915x460mm bowl size 410x330x160mm complete all as specified. 51 S&F in repair 25mm dia stainless steel curtain rod with fancy type fixing brackets, stops, rollers,lattu etc. complete all as specified and directed by Engr-in-charge.(Note : Entire work will be done/ executed in patches of any qty and any size all as specified by Engr-in-charge) 52 S&F in repairs stainless steel kitchen plate rack of 600x750x250 mm fixed to wall complete all as specified and directed. 53 S&F in repair 15mm bore centre hole basin mixer fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot and `Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 54 S&F in repair 15mm bore Brass CP sink mixer fancy type with swinging casted spout (wall mounted type) for kitchen sink screwed down for iron pipe and fixed complete all as specified and directed. 55 Supply & Fixing in repair 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. 56 Supply & Fixingin repair 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. 57 Supply & Fixingin repair 25 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. 58 S&F in rep vitreous china wash down water closet pan (pedestal pattern), white including P or S trap, connection to drain (or outgoing pipe) and to flushing pipe 32mm PVC with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified. 59 S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including trap and provn of cement concrete bedding complete asfixed complete all as specified. 60 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. 61 S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. 62 S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. 63 S&F in repair 15mm bore, 600mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. 64 S&F in repair 15mm bore pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 65 S&F in repairs of32mm Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms.for kitchen sink 66 S&F Grating 140mmmade out ofround stainless steel for WHB/Sink/Bathroom/Toilet complete all as specified and directed. 67 S&F in repair 32 to 40mm dia PVC waste pipe for WHB/sink/Urinal complete all as specified and as directed. 68 S&F in repair 450mmx600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. 69 S&F in repair sheet glass corner wall mounted shelf assembly consisting of 5.50 mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. 70 S&F in repairs sheet glass shelf aasembly consisting of 5.50 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing of 600 mm long complete all as specified and as directed. 71 S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type)including cutting for and pinning in ends of brackets or erecting standinclusive of fixing of supply and 32mm PVC waste pipe etc complete all as specified and as directed. 72 S&F in repair plastic water closet seat for pedestal/semi pedestal closet pan, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. 73 S&F in repair 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe orforunion complete all as specified and as directed. 74 S&F in repair two way 15mm bore CP fancy type angle cock, cast copper alloy, screwed both ends for iron pipe orforunion complete all as specified and as directed. 75 S&F in repairs 15mm bore stop valves, angle cock, cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and as directed. 76 S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 77 S&F in repair 15mm bore two way Bib taps(for health faucet/jet spray) fancy type, chromium plated, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 78 S&F in repair 15mm bore dia pipe CP wall mixer for mixing (HOT/COLD) water, with wall cap/band of CP Brass, screwed down, screwd foriron pipes 15mm bore complete all as specified and directed. 79 S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed. 80 S&F in repair Jet Spray (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.00 metre long flexible tube including making connections and fixed in position complete in all respect complete all as specified and directed. 81 S&F in repair SS soap dish, approximate size 150x 150x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. 82 S&F in repairs Tubular towel rail brass chromium plated 20 mm diaD-type 60 cm long between flanges, including brackets and fixed to walls, complete. 83 S&F in Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified. 84 Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. 85 Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed. 86 S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSRcomplete all as specified and as directed. 87 Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all specified and as directed. 88 Supply and fixing 100 mm long butt hinges, medium weight cold rold mild steel and fixed. 89 Supply and fixing 150mm long extruded alluminium alloy handle, cast type, anodized all as specified 90 Supply and fixing 200 mm long aluminium, anodized barrel tower bolts of extruded section all as specified 91 Supply and fixing250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified 92 M&L for powder coated aluminium window / venilator frame with side hung shutters (fully glazed) and aluminium grill 7.50 mm thick as per design code No: 007 of dural grill or equivalent make as approved comprising of chokhat and shutters weight not less than 0.55kg/Rmincluding jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip, sheet glass 4.00mm thick glass of selected quality for panels, stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm, aluminium grill and aluminium hardware fitting fixed with steel chromium plated screws,100 mm size aluminium D type handles 01 No, 02 Nos 75mm size stainless steel medium weighthinges,02 Nos 100mm long aluminium tower bolts, one peg stay 150 mm long etc in each shutter, complete as per site requirement and asspecified and directed. 93 Taking down existing switch board cover with switches to faciliate the tiling work and refixing the same on existing switch boe on hylam sheet including concealed the open battens wiring whereever required on site 94 M&L for Chipping of 50mm average thickness unsound/weak concrete material from slabs, beams, columns, footings etc. and plaster with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts complete all as per direction of Engineer-In-Charge 95 M&L for Cleaning & applying rust remover onin two coats over rusted reinforcement surface of RCC membersand providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 2-3 sq. mtr/ltr not less than 50 microns dft to reinforcement surface as per manufacturer’s instructions including all machinery, tools tackles and clearing of debris.(Note : Entire Exposed Surface of RCC members after chipping shall be measured and paid.) 96 M&L for providing Micro concrete M-50 (Minimum grade) with CICO MICROCONCRETEat the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine including proper props and structural steel support for any height ,if required etc all as specified and directed.Make: CICO MICROCONCRETE of CICO Technologies Ltd or equivalent in Fosroc/STP/BASF.
