}

Tender For Annual Plan-Keerampara Gp 2025-26 Proj No 35/25-26-Veterinary Hospital Maintenance Keerampara Gp-General Civil Work, Ernakulam-Kerala

Local Self Government Department has published Tender For Annual Plan-Keerampara Gp 2025-26 Proj No 35/25-26-Veterinary Hospital Maintenance Keerampara Gp-General Civil Work. Submission Date for this Tender is 11-08-2025. Building Work Tenders in Ernakulam Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

50435532
Tender For Annual Plan-Keerampara Gp 2025-26 Proj No 35/25-26-Veterinary Hospital Maintenance Keerampara Gp-General Civil Work
Tender
Indian
Kerala
Ernakulam
11-08-2025

Tender Documents

Tender Details

Tender For Annual Plan-Keerampara gp 2025-26 Proj no 35/25-26-VETERINARY HOSPITAL MAINTENANCE KEERAMPARA GP-General Civil Work-- 1 Maintenance 2 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 3 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 4 OD129192/2025-2026:Providing and fixing precoated galvanised iron Trafford sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), or nearest available thickness ,total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 5 OD65186/2025-2026:Ridge capping with pre painted galvanised steel sheet 0.35mm thick on nearest size having 45cm wide including all cost and materials labour charge etc..complete 6 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 7 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Key Value

Document Fees
INR 750 /-
EMD
INR 8470.0 /-
Tender Value
INR 3.38 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail