Infrastructure Upgradation Of Veterinary Dispensary At Burla In Sambalpur District.- 1 Clearing & grubbing shrub, jungles including uprooting stumps of trees and trees below 1.0 m. girth and thick bushes including bamboo clamps based on pre-measurement disposing the debris away from the work site with all leads,lifts and delifts with cost of all labour,T & P, hiring and running charges of all machineries, cess complete as per direction of Engineer-in-Charge. 2 Earthwork in all kinds of soil for excavation of foundation with initial lead and lift including dressing and leveling the beds etc. completein all respects as per direction of the Engineer-in-Charge. 3 Dewatering of standing / ponding water by using 10HP diesel dewatering pumps of average depth of standing water0.5m depth and discharging the same outside the working area with cost of all labour, T&P, taxes, POL etc. complete as directed by the Engineer-in-Charge. 4 Supplying and filling the foundation & plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150cm thick watering & ramming including cost, conveyance, royalty and taxes of all materials, cost of all labours, T & P etc as required for the work complete as per direction of the Engineer-in-Charge. 5 Providing & laying plain cement concrete 1:3:6 (1 cement: 3 sand: 6 stone aggregate 20mm nominal size) as levelling course in foundation & plinth etc including tampering, curring, shuttering etc. complete all depth and height including cost, conveyance, royalty and taxes of all materials, cost of all labour, T & P etc as required for the work complete and as direction of Engineer-in-Charge. 6 Providing and laying Cement Concrete M20 using 20mm size down graded Black H.G. crusher brocken chips for R.C.C. works including cost, carraige, rayality of all materials and machinaries and labours with all leads, lifts etc completeas per approved drawings & specification & direction of the Engineer-in-charge. 7 Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete in R.C.C. footing, column, slab, stair case, landing, lintel including cost, conveyance, royalty and taxes of all materials, cost of all labour etc as required for the work complete and as direction of Engineer-in-Charge. 8 Footing, Plinth Beam 9 Roof Beams,column,girder and bressmer 10 Lintel 11 Roof slab & Chajja 12 Cutting, straightening colled or bent up M.S. rods, HYSD steel or Tor steel or grade Fe-415 confirming to I.S.-1786 - 1985 welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of m.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod, HYSD steel or Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost). 13 Fly Ash brick masonary in Sub structure in cement mortar (1:6) in using Fly ash Bricks of 23cm x 11cm x 8 cm having crushing strength not less than 75 Kg/Cm2including watering, curing and cost, conveyance, royality of all materials & cost of labour charges etc complete. 14 Fly Ash brick masonary in Supper structure in cement mortar (1:6) in using Fly ash Bricks of 25cm x 12cm x 8 cm having crushing strength not less than 75 Kg/Cm2including watering, curing and cost, conveyance, royality of all materials & cost of labour charges etc complete. 15 6mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T & P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. 16 Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. 17 Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. 18 2.5cm thick grading concrete (1:2:2) on roof6mm c.b.h.g. chips 19 Providing and laying Vitrifiedtiles 600x600 mm. 1st quality laid on 25mm thick cement mortar 1:6 (1cement:6coarse sand) including pointing the joints with white cement and matching pigments, etc. complete design/drawings including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labourrequired for the works etc. complete in all respect as directed by the Engineer-in-Charge. 20 Providing and laying Anti-skid ceramic floor tiles 300x300 mm approved make conforming to IS:13755 1st quality laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete design/drawings including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labourrequired for the works etc. complete in all respect as directed by the Engineer-in-Charge. 21 Supplying, fitting & fixing of 30cm x 30cm/40cm x 40cm special plain/printed series Wall Ceramic tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge 22 Finishing wall surface of walls with Acrylicwall putty (water based) ofapproved make and finished smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials, taxes, labour, T. & P. etccomplete. 23 Providing and applying to outside walls with two or more coats of -Fungal weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, and direction of Engineer-in-Charge at all elevations including all material labour complete. 24 One coats to wall with any approved primer of approved shade including cost, carriage, taxes of paints, brush, putty, scaffoldind charges, labour charges, cess etc. complete as per direction of Engineer-in-Charge. 25 Painting two coats with plastic emulsion paint over a coat of water as per the direction of Engineer-in-Charge at all floors and all heights including all material & labour complete. 26 Providing & painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the direction of Engineer-in-Charge at all floors and all heights including all material & labour complete. 27 Providing, fitting and fixing of aluminium door with aluminium door section of 9202 as vertical member 9201 as top member and 9200 as bottom and middle member and with 12mm thick glass fixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour and T & P hire charges of drilling mechine, labour charges etc. as per the direction of Engineer- In- Charge. 28 Supplying,fittting,fixing of window(Sliding Type) made of Aluminium section 9778 as window frame,section No 4095,4096 and 9777,3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber bidding including locking arrangement, including all fitting ,including cost of materials, all taxes/labour,T&P etc complete as per direction of Engineer -in- Charge 29 Supplying,fitting and fixing general iron grill,door and window etc. complete with clamps including making good to the wall,ceiling and floor all complete as per specification (Local Market Rate) 30 Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge 31 Provide and apply 2 coats of acrylic based polymer modified water proofing coatingapproved brand and manufacture including cost, carriage, taxes of paints, brush, putty, scaffoldind charges, labour charges, cess etc. complete as per direction of Engineer-in-Charge. 32 APPROACH ROAD WORK 33 Earthwork in all kinds of soil for excavation of foundation with initial lead and lift including dressing and leveling the beds etc. completein all respects as per direction of the Engineer-in-Charge. 34 Supplying and filling the foundation & plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150cm thick watering & ramming including cost, conveyance, royalty and taxes of all materials, cost of all labours, T & P etc as required for the work complete as per direction of the Engineer-in-Charge. 35 Providing & laying plain cement concrete 1:3:6 (1 cement: 3 sand: 6 stone aggregate 20mm nominal size) as levelling course in foundation & plinth etc including tampering, curring, shuttering etc. complete all depth and height including cost, conveyance, royalty and taxes of all materials, cost of all labour, T & P etc as required for the work complete and as direction of Engineer-in-Charge. 36 Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete in R.C.C. footing, column, slab, stair case, landing, lintel including cost, conveyance, royalty and taxes of all materials, cost of all labour etc as required for the work complete and as direction of Engineer-in-Charge. 37 Providing and laying of Granular Sub-base course using coarse graded aggregate by providing the materials conforming to Grading-III of Table 400-1 complete as per Technical Specification Clause 401 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) and as per the direction of the Engineer-in-charge. 38 Supplying and fixing of 60mm thick cement concrete interlockingpaver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. 39 (B) Electrical Work 40 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5sqmm FR copper conductor single core cable in surface/ recessed medium class PVC conduit with piano type switch , phenolic laminated sheet , suitable size MS box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required. (make- HAVELLS /HPL / VGUARD/ FINOLEX/ ANCHOR) 41 GROUP A 42 GROUP B 43 GROUP C 44 Recessedwiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor forloop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/Great White/HPL) Separate 45 Separate 46 Supply and fixing of 5Amp plugwith switch on existing board (Piano type)1.25.1+1.25.2 47 Supply and fixing ofmetal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona/Great white/HPL) 48 Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire -Finolex/L&T/Havells/V-Guard/Great White/Mescab/HPL/KEI) 49 2 X 1.5sq.mm +1 X 1.5sqmm 50 2 X 2.5sq.mm +1 X 1.5sqmm 51 2 X 4sq.mm +1 X 1.5sqmm. 52 2 X 6sq.mm +1 X 2.5sqmm. 53 4X6sq.mm+2X2.5sq.mm 54 INVERTER WIRING with 1.5sqmm PVC S/C multistrand Copper wire 55 Supply and fixing of superior type call bell of ISI marked, on 6 X4conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/1988 (make-Cona/Anchor/Benlo) 56 (Ding Dong) call bell . 57 S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . 58 Supplying and fixing of stepped type electronic fan regulator on the existing switch box including connections but excluding laminated sheet etc.asrequired. 59 Supply and fixing of Computer Board having 5amp 3 nos Switch & Socket 60 Supply and fixing of 63Amp DP main Switch (Make-Hager/ scheinder / Siemens ) 61 Zero maintenance chemical earthing 6FT 62 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 63 SPN 8 way (8+12) IP 30 (MAKE Legrand model EKINOX3 ETPN DB CATNO. 507601 or its equivalent ) 64 TPN 4 way (8+12) IP 30 (MAKE Legrand model EKINOX3 ETPN DB CATNO. 507660 or its equivalent ) 65 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 66 C Curve SP MCB 240/410V 6-32A (MAKE Legrand model DX3 MCB or its equivalent to Hager/ scheinder / Siemens ) 67 C Curve DP MCB 415V 6-32A (MAKE Legrand model DX3 MCB or its equivalent to Hager/ scheinder / Siemens ) 68 C Curve FP MCB 415V 6-32A (MAKE Legrand model DX3 MCB or its equivalent to Hager/ scheinder / Siemens ) 69 Supply & installation of Panel Board wall mounted size 18 X 13 X 6 made out of 16 SWG CR sheet with powder coating & with following arrangement. -1) 63Amp 4P 16Ka MCCB-1no (Legrand/ Snider)(3) 63A cu B/B -1nowith digital instruments with voltmeter,transparent glass, amperemetre, CT coil, Selector switch, Panel fuse & RYB indicator. 70 Supply and fixing ofA.C Ceiling fan 48 size. (Make-Polycab -Vital / Crompton -Jura/ Havells-Velocity/ Usha-striker/Orient-new breezee/Summer Cool , Polar -Model Win-R etc). 71 Supply and fixing of Exhaust fan 9/10 size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Usha or equivalent). 72 Supply and fixing of Wall mounted fan 16 size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Polycab or equivalent). 73 Supply & Fixing of 15Watt circular/ round recessed fitting(Make-Bajaj/ Philips / Crompton/ Havells/ Panasonic)(for Corridoor) 74 Supply & Fixing of 20Watt LED Tubet light (Make-Bajaj/Philips /Crompton/ Havells/Wipro/Halonix/Panasonic) 75 Supply & Fixing of 30Watt LED Tubet light (Make-Bajaj/Philips /Crompton/ Havells/Wipro/Halonix/Panasonic) 76 Supply & Fixing of 36Watt 2X2 Recessed fitting(Make-Bajaj/Philips /Crompton/ Havells/Wipro/Halonix/Panasonic) 77 Supply & Fixing of 60Watt LED street light (Make-Bajaj/Philips /Crompton/ Havells/Wipro/Halonix/Panasonic) 78 Supply & Fixing of 90Watt LED street light (Make-Bajaj/Philips /Crompton/ Havells/Wipro/Halonix/Panasonic) 79 S/F of 15 Amp Top 80 Sypply of 16 mm2 4 core alluminioum armoured cable (Polycab/ Havels/ KEI/ Finolex) 81 Supply of 16mm2 Cable Turmination 82 Laying of 16sqmm 4core Al. Arm Cable on wall Surface Horizental & Vertical 83 S/F OF100A/415V KIT KAT REWIREABLE FUSE TO BE INSTALLED AFTER ENERGY METER AS PER RECOMMENDATION OF WESCO ENGINEERS 84 (C)PH Work 85 Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge 86 25mm dia PVC ASTM pipe (sch-80) 87 32mm dia PVC ASTM pipe (sch-80) 88 Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. 89 15mm dia CP angle stop cock (FLR-ACR-5053N Jaquar make) 90 15mm dia CP two in one bib cock (FLR-CHR-5041N Jaquar make) 91 15mm dia CPbib cock (Jaquar Make) 92 25mm dia brassfull way valve (Shakti make) 93 32mm dia brassfull way valve (Shakti make) 94 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) 95 15mm CP Extension piece 96 125mm CP grating 97 15mm size C.P. flange 98 Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge 99 2000 liters capacityPVC water storage tank 100 Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. 101 Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge 102 Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. 103 Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 104 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) 105 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) 106 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) 107 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) 108 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) 109 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) 110 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) 111 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) 112 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) 113 Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI p or s trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 114 580mm size Orissa pan (Hindware/Parryware/Neycer make) 115 Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 116 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) 117 Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 118 European water closet with p trap plain(Hindware/Parryware/Neycer make) 119 Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 120 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal 121 Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink 122 Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 123 25mmx600mm long CP towel rail 124 Towel ring 125 Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 126 600mmx125mm plate glass shelf with CP/NP guard rails. 127 Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 128 600mmx450mm size B.E mirror (swivelled type) 129 Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 130 CP soap holder 131 Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge 132 Inside size 76cmx76cmx46cm with 18” dia RCC MH cover 133 Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. 134 Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 135 Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge ) 136 Kajaria/Somany/Johnson tile 30cmx30cm 137 Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. 138 Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) 139 Kajaria/Somany/Johnson tile 45cmx30cm 140 Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 141 Ext. S/D Portion 142 Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufactures specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 143 100mm dia P.V.C. pipe 144 Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. 145 MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) 146 Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. 147 Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 40 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 40 liters along with noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge 148 Aqua guard pure Chill 40 PSS UV 149 1 no of 20 Users septic tank of size 2.30m x 1.10m x 2.10m Internal size 150 Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1 x 3.40 x 2.30 x 1.50 = 151 Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. 1 x 3.40 x 2.30 x 0.60 = 152 Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. 153 Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. 154 1 x 3.40 x 2.30x 0.15 = 155 Supplying all labor T&P &Providing C.C. (1:2:4)with 12mm size brokenhard granite chips including watering curing &lead of all materials to site etc. all complete. 156 1 x 3.40 x 2.30 x 0.10 = 157 1 x 2.30 x 1.10 x 0.05 = 158 Supplying all labor T&P &Providing C.C. (1:2:4)with 12mm size brokenhard granite chips including watering curing &lead of all materials to site etc. all complete. 159 ProvidingC.C. (1:1½:3) with 12mm size hard granite chips of RCC workincluding hoisting and laying and curing with leadof all materials to site.1 x 2.80 x 1.60 x 0.10 = 160 Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.0.448cum x 2.50x 35.32 = 39.55 kg say rs 161 Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor. 162 RCC floor, roof slab chhaja up to 4.430 m height 163 1 x 2.30 x 1.10 = 164 2(2.80+1.60) x 0.20 = 165 Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor. 166 Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site. 167 1st footing 168 2 x3.10 x 0.40 x 1.40 = 169 2 x 1.10 x 0.40 x 1.40 = 170 2nd footing 171 2 x 2.80 x 0.25 x 0.70 = 172 2 x 1.10 x 0.25 x 0.70 = 173 Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site. 174 Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site. 175 1 x 2.30 x 1.10 = 176 2(2.30+1.10) x 2.10 = 177 2(2.80+1.60) x 0.60 = 178 Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site. 179 Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.Same as plastering 180 Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. 181 Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. 182 Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 1 x 3.40 x 2.30 x 0.15 = 183 Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories 184 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only 185 Drilling of 200mm dia bore 186 00 mtr to 30mtr 187 30 mtr to 45mtr 188 Drilling of 150mm dia bore 189 45 mtr to 213 190 Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 191 200mm dia PVC pipe 192 00 mtr to 45 mtrs 193 Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber O ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 194 200mm dia PVC (sch-80) pipe 195 Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) 196 Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge 197 By DTH Rig 198 Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: 199 Rocky terrain with boulder formation for 300m depth 200 Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 201 1H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm 202 DOL Control panel 203 40mm dia steel short piece 204 Well cap 205 50mm size CI bracket 206 2.50sqmm flat cable 207 Steel rope with cover 208 Labour charges for lowering including transportation 209 Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge 210 32mm HDPE pipes (Finolex/Supreme make)
