|
| 1 | Excavationforfoundationinearth,soilofall types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreadingasdirected,dewatering,preparingthe bedforthefoundation andnecessarybackfilling, ramming,wateringincludingshoringandstrutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page No. 259 |
| 2 | Excavation for foundation in hard murum including removing theexcavated materialupto distanceof 50metresbeyondthebuildingareaandstacking andspreadingasdirected,dewatering,preparing thebedforthefoundationandnecessaryback filling,ramming,wateringincludingshoringand struttingetc.complete.(Liftupto1.50m)By Manual Means Bd.A.1 Page No. 259 |
| 3 | ProvidingandlayingCastinsitu/ReadyMix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and beddingincludingbailingoutwater,formwork, laying/pumping,compacting,rougheningthemif special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrumTypemixer/concreteBatchmix plant (Pan mixer) etc. complete.With fine aggregate ( Crushed sand VSI Grade) Bd. E. 1 Page No. 287 |
| 4 | Providingandlayinginsitu/ReadyMix cement concreteM-20of trap / granite /quartzite/ gneiss metal for R.C.C. workin foundations like raft, stripfoundations,grillageand footingsof R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks,compactionand curingroughening the surface if special finish is to be provided (Excluding reinforcementandstructuralsteel)etc.complete, withfullyautomaticmicroprocessorbased PLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Pan mixer)etc. complete. With fine aggregate ( Crushed sand VSI Grade ) Bd.F.3 Page No. 298 and B.7, Page No.38 |
| 5 | ProvidingandlayingCastinsitu/ReadyMix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping,compactionfinishingtheformed surfaceswithcementmortar1:3ofsufficient minimumthicknesstogiveasmoothandeven surfaceorrougheningifspecialfinishistobe provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automaticmicroprocessorbasedPLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand Bd.F.5 Page No. 300 and B.7, Page.No. 38 |
| 6 | ProvidingandlayingCastinsitu/ReadyMix cement concrete M-20 of trap / granite /quartzite/gneissmetalforR.C.C.beamsand lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening thesurfaceifspecialfinishis tobeprovidedand curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible DrumTypemixer/ concreteBatchmixplant(Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 7 | ProvidingandlayingCastinsitu/ReadyMix cementconcreteM-20of trap/ granite/ quartzite/gneissmetalforR.C.C.chajjaasper detaileddesignanddrawingsincludingcentering, formwork,coverblockscompacting,curing, finishing and roughening the surface if special finish is to beprovided andcuring complete.(Excluding reinforcement and structural steel).with fully automaticmicroprocessorbasedPLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) Bd.F.9 Page No. 303 and B.7, Page No.38 |
| 8 | ProvidingandlayingCastinsitu/ReadyMix cement concrete M-20 of trap/ granite / quartzite/gneissmetalfor R.C.C.slabs and landings asperdetaileddesignsanddrawings including centering, formwork, cover blocks, laying/pumping,compactionfinishingtheformed surfaceswithcementmortar1:3ofsufficient minimumthicknesstogiveasmoothandeven surfaceorrougheningifspecialfinishistobe provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automaticmicroprocessorbasedPLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) Bd.F.8 Page No. 302 and B.7, Page No.38 |
| 9 | ProvidingandlayingCastinsitu/ReadyMix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automaticmicroprocessorbasedPLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate(Crushedsand VSI Grade f) Bd.F.11 Page No. 304 and B.7, Page No. 38 |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps,footings, foundations,slabs, beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,arches etc. as per detailed designs, drawings and schedules.includingcutting,bending, hookingthe bars,bindingwithwiresortackweldingand supporting as required complete. Bd.F.17, Page No. 306 |
| 11 | ProvidingsecondclassBurntBrickmasonry withconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , strikingjoints on unexposed faces,rakingoutjointsonexposedfacesand watering etc. Complete. Bd.G. 1 Page No. 313 |
| 12 | Filling in plinth and floors withapproved excavated material in15cm. to20cm. layers including watering and compacting etc. complete. Bd.A.11 Page No. 263 |
| 13 | Fillinginplinthandfloorswithcontractors material/brought from outside and approved by Engineerincharge inlayersof15cm.to20cm. including watering and compaction etc. complete. Bd.A.11 Page No. 263 |
| 14 | ProvidingsecondclassBurntBrickmasonry withconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstriking joints,rakingoutjoints,wateringandscaffolding etc. Complete Bd.G.5 Page No. 315 |
| 15 | Providingandfixingmildsteelgrillworkfor windows,ventilatorsetc.20kg/sqmasper drawingincludingfixtures,necessarywelding& painting with one coats of anticorrosive paint & two coats of oil painting complete. Bd.U.1 Page No. 537 |
| 16 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of twotrackswithrectangularpipehavingoverall dimension63.50x38.10x 1.02mmatweight 0.547kg/Rmt.andwindowframebottomtrack section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30mmatweight0.659kg/Rmt.Theshutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x1.10mmatweight0.469kg/Rmt.Andhandle section40x18x1.25mmatweight0.417 kg/Rmt.andtopsection40x18x1.25mmat weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as As directed by engineer-in-charge. |
| 17 | Providingandfixing steel framedoor ofangle 50 x 50 x 6 mm with mild steel bars 16 mm dia. horizontally at 10mm c/c for ventilator portion includingironholdfastboxesforfixingshutters including welding, finishing, painting etc. complete. As directed by Engineer in charge. |
| 18 | ProvidingandfixingsteelwindowC.R.C.sheet as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25mmshuttersinglesheetof24gaugesingle leaf joined by fusion welding at appropriate points with verticalgrooves of 15mm wideand 15mm deep at a distance of 45 mm. The first and last rib should be 60mm awayfrom verticaledge ofthe shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate theframeintosegmentswithtwoleafshutter square12mmsquareguardbarsat120mm center with all accessories Bd-T-53, Page No. 509 |
| 19 | Providing internal cement plaster 20mm thick in singlecoatincementmortar1:4withoutneeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 |
| 20 | Providing internal cement plaster 12mm thick in singlecoatincementmortar1:5withoutneeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 |
| 21 | ProvidingandapplyingTwocoatsofwallcare Putty on plastered surface and Ceiling and Walls topreparesurfaceevenandsmoothofapproved make, etc complete. As directed by Engineer in charge. |
| 22 | Providingandlayingvitrifiedmirror/glossy finish tiles decorativetypehavingsize 590mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thicknessand confirmingtoIS.15622-2006 ( groupBla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4cementmortarincludingneat cementfloat, fillingjoints,curingandclearing etc. complete. Bd.M. 12 Page No.385 |
| 23 | Providing and applying priming coat on concrete/ masonary/AsbestosCementplasteredsurfaces includingscaffoldingifnecessary,preparingthe surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. As directed by Engineer in charge. |
| 24 | Providingandapplyingexternalraincoat paintingwithcrackfillingacrylicpolymerbased chemical compound coating to the external surface of walls to prevent water seepage in the masonry wallsduringmonsoonaddedwithrequiredshade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymerbaseprimerincludingpreparingsurface scrappingtheexistinglooseoldpaint,removing loose particles of sand on the surface opening and cleaning the cracks developed in the external As directed by Engineer in charge. |
| 25 | Providingandlayingtelephoneblack/Amba White/Cadburybrown/Rubyred/Ocean Browngranitestoneof18to20mmthickfor door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler As directed by Engineer-In- Charge |
| 26 | ROYALTY CHARGES :- Supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates.[As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt.04 June ,2021. States that the royalty charges ofRs.211.95/Cu.M. ) are considered. The surcharge levied on Royalty shall also be payable to the contractor. ROYALTY CHARGES FOR SAND |
| 27 | ROYALTY CHARGES FOR OTHER MINERALS |
| 28 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender.testing of material by Quality control and certified quality must be use by contractor. CONCRETE Compressive Strength of C. C. Cube (Set of 3 Cubes) |
| 29 | PART II- ADD 18% GST |
| 30 | 0.1% FOR LABOUR INSURANCE |
