Tender For Construction Work Of Atal Knowledge Center In Kuiyan Gram Panchayat Kuiyan. - Atal Gyan Kendra Construction Work Khuiyan Gram Panchayat Khuiyan. - Excavate Soil Up To 1.5 M Depth In Foundation, Trench And Drain, Level The Sides, Take Out The Ex, Hanumangarh-Rajasthan

Tender For Construction Work Of Atal Knowledge Center In Kuiyan Gram Panchayat Kuiyan. - Atal Gyan Kendra Construction Work Khuiyan Gram Panchayat Khuiyan. - Excavate soil up to 1.5 m depth in foundation, trench and drain, level the sides, take out the excavated soil, fill the empty spaces with soil again after filling the foundation and dispose of the remaining soil up to 50 m.2 In cement concrete foundation or floor, mix 40 mm measured brick aggregate in cement sand mortar 1 cement 5 sand: 10 aggregate ratio and tamp it, including tampering.3 Masonry of first class bricks in foundation and plinth in cement gravel 1:6 including closing the side cracks and including tampering.4 Pour and supply cement concrete in the prepared cement concrete mixture of 1:1.5:3 and press it in roof slabs, eaves, beams, lintels etc., level the surface in 1:3 mortar, including tampering. 5 Masonry of first class bricks in superstructure in cement gravel 1:6 ratio including closing of side cracks and leveling.6 Cutting, bending, fixing and tying of iron for RCC work along with supply.7 Installation of centering shunting for laying RCC roof slabs, balcony, lintel etc. upto 4.5 m height and removal as per specifications.8 Earth work in HkjkbZ, carrying out 1km by lifting 1.5 m and installing dog well, applying camber, grade in well and levelling and raking of the soil carried out.9 1 m wide and 2 m deep made of 22 gauge plain GI sheet. Supply of 25x25x3 mm conical iron frame with 40x40x3 mm angle iron door as per map no. 14. With angular sliding bolt, latches and holding strips. (M.S. sheet)10 0.6 m wide and 1.8 m high window made of 22 gauge plain GI sheet in which entire frame is 25x25x3 mm conical iron 10 mm grill and 3 mm thick glass at the top, with angular, latches 2 pieces and 4 pieces of strips, as per map no. 3. Supply per sq.m. (Analysis for 1.08 sq.m.) GI Plain Sheet Unit per sq.m. (M.S. Sheet)11 Fitting and supplying iron mesh of 14 to 24 gauge in iron window and fixing it with 20x3 mm beading and screwing it. Unit per sq.m. Analysis for 0.72 sq.m. window of size 1.2x0.60 m.12 Cement plaster on wall in 12 mm including scraping and tamping of joints by mixing cement-gravel in 1:6 ratio.13 Polishing/rough quota stone flooring over 1:4 cement-gravel mixture in 20 mm thickness, laying of skirting and joining joints by filling them with cement slurry etc. 14 Providing & applying wall putty (JK/Birla or equivalent) or POP filling complete to achieve fine finish (one or more coats) (as per PWD BSR)15 Two or more coats on new work including preparation of base with primer, putty lippy complete in all respect add extra if apex royal or other equivalent exterior paint used instead of plastic emulsion (as per PWD BSR)16 Applying enamel paint to make even surface on new work17 90 mm pvc pipe for rain water18 Light Point19 1.50 sq. mm. down rod of standard length (upto 30 cm) of ceiling fans Installation, testing and commissioning of FR PVC insulated copper conductor single core cable including wiring20 Supply and installation of light fitting work including equipment (ISI Mark) and sanitary fittings21 Information board and photographs etc.

INR 1000 /-

INR 8 Lakhs /-