Tender For Spl Repair To Bldg No P-28 At Base Camp Ex 190 Mh Under Ge 873 Ews; 1 Dismantling of tiles of any description or thickness in floors,complete all as specified and as directed. 2 M&L 25mm thick plain cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate) as in floor complete all as specified and directed 3 M & L non skid ceramic tile 7 to 8mm thick (square / rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement match, 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed. 4 M&L for non skid ceramic coloured tiles (Premium quality) (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6.complete all as specified and directed. 5 Ditto as per item no 39 above but in vertical surfaces such as skirtings, dados and risers to steps etc dado/skriting etc 6 M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:3 as in back coat complete all as specified and directed. 7 M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for in steps, jambs, pillars, window-cills, cooking platforms and like cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture ofpigment to match with shade of granite moulding of edges, screed bed/ backing coat and rubbing, polishing complete all as specified and as directed.complete all as specified and as directed. 8 Dismantling wall and ceilling board (fibre, pulp, insulation etc) or insulation board/slabs/blanket any thickness including cover fillets all as specified and as directed 9 M&L 9 mm thick prelaminated partical board, interior grade ,prelaminated one side withdecorative choice lamination and other side balancing white lamination ,fixed with nails as in wall panelling, complete all as specified and directed 10 M&L 9 mm thick prelaminated partical board, interior grade ,prelaminated one side withdecorative choice lamination and other side balancing white lamination ,fixed with nails as in ceiling works, complete all as specified and directed 11 Dismantling timber framed in fillets, rails, posts rafters, purlines, etc under 40 Sq cm in section complete all as specified and directed. 12 S&F in repair second class hard wood plain fillets,rectangular in section, clean sawn, secured with nails exc 13 and n.exc 25, complete all as specified and directed 13 S&F in repairs 2nd class hard wood plain fillets, square, rectangular in section, sectional areaexe 3 sqcm & n. exe 6 sqcm clean sawn, secured with nails or bradscomplete all as specified. 14 S&F solid PVC Wall Lining for wall panellingconsisting of 5 mm thick wood grainprintedcolour PVC sheet inclusivefixing with all accessoriesat site as per specifications and drawing complete all as specified and directed. 15 M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specified & directed. 16 S&F GI powder coated snap grid frame work for false ceiling all as specified of grid 605 x 605 including GIhangersof suitable dia and fixed to purlin/rafters/ceiling incluing fixing arrangement complete all as specified and directed. 17 M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame.complete all as specified and directed. 18 Dismantlingof plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering all as specified and as directed . 19 S&F Galvanised MS sheeting of 0.63 mm thickwith Zinc coating of 275 corrugated ISI Marked and made with two corrugation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall complete all as specified and directed 20 S&Fplain, galvanised MS sheeting of 0.63 mm thickin ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed 21 M&LPreparing new or previously untreated steel & iron surfaces of any description over 10Cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed 22 M&L for preparation of old painted steel surfaces & applyingtwo coat of synthetic enamel paint on steel surface of any description over 10 cm in width or girth complete all as specified and as directed. 23 Dismantling/ demolition ofpolymeric water proofing membranesingle layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of materialand debris away from the site etc complete all as specified and directed. 24 Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting and roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing complete all as specified and directed. 25 M&Lcement concretetype B-0, 1:2:4 mix ( 12.5 mm graded agg) in padding, roof kerbs or mud stops, rounded or chamfered on edgesand similar workall as specified and directed. 26 M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :-(a) M&L for preparation of roof surfaces by brushing, cleaning and Applying a priming coat with bitumen primer @ 0.5 ltr/Sqm (b) Applying a hot blown bitumen grade 85/25 @ 1.2 Kg/sqm(c) Laying APP modified water proofing membrane weighing not less than 3 Kg/Sqm will be laid over applied bitumen.(d) Applying a tack coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm and sand in confirming to Zone II in dry condition will be dusted over the bitumen @1.00 Kg/Sqm 27 M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. 28 Taking down chowkats or frames with shutters (without taking offf shutters from the frames) not exc. 1.5 sqm each. (Steel/Wooden/aluminium) complete all as specified and directed 29 Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.(Steel/Wooden) complete all as specified and directed 30 S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinnedat joints complete all as specified and directed. 31 S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed 32 S&F Glazed and skeleton shutters of 30mm thick2nd class hardwood ,open rebated and prepared to receive glass,gauze etc.(without sash bars),edges of framing plain chamfered or rounded.fitted with cut and mitred beads for securing etc if windows,ventilators etc. 33 S&F powder coatedanodized aluminium door & framewith reqd size of aluminium sections weighing 0.55 kg/mincluding 5 mm thick tinted glass coloured in half portion andin other half portion 4 mm thick ACP sheet of any colour complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No Hydraulic door closer for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 101.50x44.45mm(b)Aluminium style/top & middle rails of shutter = 83.5x44.45mm(c) Aluminium bottom rail of shutter = 114.50x44.45mm(d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. 34 S & F powder coatedAnodised aluminium three track sliding window made of extruded profiles with reqd size of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixedwith stainless steel wire staples on one shutters with two nylon roller on each shutters including star lock handle complete all as specified and directed by Engineer-in-charge. 35 S&F powder coatedof any colour (thickness or powder coating not less than 50 micron)anodised aluminium partition wall/ window and ventilator shutters including frame of required , side hung type without sash bars, aluminium sections weighing 0.55 Kg/M including necessary joining cleats,glass(min thickness 4mm) ,wiremesh, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 No.) suitable handle (1 no.) completeallasspecified 36 S&F aluminium anodised grill (DG 104) 10mm x 5 mm thick on Deco grill or equivalent fixed with F section approved make complete all as specified and directed. 37 S & F factory made steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 Z section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leafdovetailed or welded complete all as specified and directed. 38 S & F steelventilators with top hung shutter & glazing bars hinges, steel peg stay etcdovetailed or welded, size and thickness of members confirming to IS 1038 complete all as specified and directed. 39 S & F in repairs Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 40 Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified & as directed. 41 S&F for 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed. Make : Saint Gobain, Modiguard, Pilkington 42 M & L Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10Cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primercomplete all as specified and directed 43 S & F 3.00mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m in each pane complete all as specified and directed. 44 S & F butt hinges 100mm mild steel cold rolled, medium weight complete all as specified and directed. 45 S & F butt hinges 75mm mild steel cold rolled, medium weight complete all as specified and directed. 46 Supply & fix MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed. 47 Supply & fix MS barrel tower bolt 150mm long stove enamelled black, complete all as specified. 48 S & Fof Extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and directed. 49 S & F of Extruded aluminium alloy handles fabricated type anodised 125 mm size complete all as specified and directed. 50 Supply & fix MS barrel tower bolt 100mm long stove enamelled black, complete all as specified. 51 S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed, complete all as specified and directed. 52 S & F Aluminium extruded section body door closer hydraulically regulated, designation No-3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and fixed, complete all as specified and directed. 53 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and thrown away from the site, complete all as specified and as directed. 54 M&L for PCC 1:3:6 type C2 75mm thick using 20 mm graded stone aggregate as in plinth protection and Finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed. 55 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed 56 M & L Framed brecket of angals or tee with web and flanges cut to shape, drilled and countersunk for screw,including bending and wending angles as necessary gusset plates, riveting, etc n exc 10 kg each brackets conforming to Fe-290 Gde-E-165 Brackets over 10 kg each to be measured under Structural Steel)complete all as specified and directed. 57 M & Lfor Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. complete all as specified and directed. 58 S & F Steel work in tubular trusses including special shaped washer etc. completed using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified and directed. 59 Dismantling of water tanks500 litres capacity of any description and removing to store complete all as specified and directed. 60 S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed. 61 S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)and making good to floor, complete all as specified and directed 62 S & F in repair stainless steel squatt pan/WC Orissabattern with integral foot rest (excluding flushing system and flush pipe) including P or S trap, set in incl concrete bedding etc as in repairsincl making good complete all as specified and as directed by engr-in-charge. 63 S & F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and directed 64 S&F in repairs 15mm bore bib taps cast copper alloy, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete and fixed in repairs all as specified. 65 S&F in repairs 15mm Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed complete all as specified and directed 66 S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and fixed, complete all as specified and directed. 67 S&F in repair vitreous china wash basin, white ( flat back or angle back type ) of size 550x400 mm including cutting for andpinnning in ends of brackets or erecting stand and 32mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms / 40mm- 60 gms) including of fixing of supply and waste pipe, complete assembled all as specified and directed. 68 S & F in reapirsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 69 S&FPVC connection of 15 mm size with PTMT nuts of length 450 mm,complete and fix in repairs all as specified and directed 70 S&F in repair Towel rail 450mm long PTMT fixed with and including cromium plated and wooden plastic clits complete all as specified. 71 S&F in repair stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. 72 Supply and fix in repairs PVC waste pipes of 40/32mm bore heavy dutythick type suitable for wash hand basins/sinks complete all as specified & directed. 73 S&F in reapirs 15mm bore fancy type pillar taps cast copper alloy with capsta heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed for iron pipe complete and fixed all as specified. 74 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia incl taking up or down steel tubing and connections,including cleaning for refixing or removal to store all as specified and directed. 75 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 25 mm dia incl taking up or down steel tubing and connections,including cleaning for refixing or removal to store all as specified and directed. 76 S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor 110mm bore complete all as specified and directed. 77 PVC bend any radius size 110mm bore with access doors complete all as specified and directed. 78 M&L in repair PVC(SWR) floor trap plain with gratings including jointing to waste pipes with solvent cement size 75mm bore complete all as specified and directed. 79 Supply & fixing in repairC.P. grating 100/125 mm dia including one large hole for connection with waste pipe of WHB as reqd at site complete all as specified and directed 80 S & F in repairs Curtain rail Harrison rails, mild steel, chromiumplated with fixing brackets, stops,rollers etc and fixed, complete all as specified and directed. 81 Demolition of block masonary built in cement mortar including all quoins, arches, pillars, etc. and rubbish off the premises complete all as specified and directed. 82 M&L for Pre-cast cement concrete Type C1, 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10cm in width and setting in CM 1:6, complete all as specified and directed 83 Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 84 M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed. 85 M&L for 15mm thick rendering in CM 1:4 on brick or concretesurface with water proofing compound @ 3% by weight of cement finished other than fair complete all as specified and directed.Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’. 86 Supply only integral water proofing compoundcomplete all as specified and directed. 87 M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application on new plastered surfaces complete all as specified and directed. 88 M&L for complete removal of extg treatmentof oldplastered surfaces of wall and applying two coat of oil bound distemper with roller on old decorated wall surfaces over 3 mm thick white putty complete all as specified and directed. 89 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surface complete all as specified and directed. 90 M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer etccomplete all as specified and directed. 91 Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed. 92 M&L for 100 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broom finish complete all as specified and directed. 93 M&L for Chequered cementconcrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cementslurry in floors including over 15mm thick screed bed in CM 1:6 complete all as specified and directed. 94 M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge.Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws. 95 (a) One light/fan point controlled by one 5 Amps one way switch 96 (b) One 3 pin socket outlet 5 Amps on independent board 97 (c) One 3 pin socket outlet 5 Amps on same board 98 M&L point wiring for power point with 2.5 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run)with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge.Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws. 99 S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed. 100 S&F socket outlet 2–in–1, 3pin, 6A (multipurpose) suitable for 3 pin/5 pin plug flush type complete all as specified and directed by the Engineer–in–Charge 101 S&F switch socket combination 3 pin, 5 Amps, 2–in1, flush type (multipurpose) 2 pin /3 pin plug complete all as specified and directed by the Engineer–in–Charge. 102 S&F switch socket combination 2–in–1, 3 pin, 5/15 Amps, flush type (multipurpose) complete all as specified and directed by the Engineer–in–Charge 103 S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by the Engineer–in–Charge. 104 Supply and fixingRechargeable LEDBulb 9 W ,220 V, white color all as specified and as directed. 105 S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. Make- Havells/Wipro/CG/Philips or equivalent 106 S&F Ceiling rose surface backelite ISI marked with 3 terminalincluding connecting and testing complete all as specified and directed. 107 S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unusedway suitable for 12 way complete all as specified and directed. 108 S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unusedway suitable for 8 way complete all as specified and directed. 109 Supply and fixing 240V, 10 KA B curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. 110 Supply and fixing 240V, 10 KA B curve miniature circuit breaker (MCB) of single poles and current carrying capacity 16 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. 111 Supply and fixing MCB SPN240V, 10KA C curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. 112 Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.Make- Havells/Wipro/CG/Philips or equivalent 113 M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed. 114 M & L for GIPipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer complete all as Specified and directed. 115 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. 116 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm. Make- Havells, Ventiair Dxor or equivalent) all as specified and directed. 117 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 118 Taking down of MCB DB/TPNall type including MCB SP/SPN and making good of wall complete all as specified and directed by the Engineer–in–Charge. 119 Taking down carefully damaged copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as perconditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by the Engineer–in–Charge. 120 Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 121 One bell/ buzzer pointcontrolled by one push buttonon the same board with otherswitches or independent withcables1.5 sq.mm. size 122 Bell push, flush type, 5 amp . 123 Buzzer, Ding Dong AC. 230 volts, single pole 124 Deduct Schedule of Credit of Rs (-) 1,02,130 (Minus) as listed in Schedule A Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount.
