|
| 1 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. |
| 2 | All kinds of soil. |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 4 | In cement mortar |
| 5 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 6 | Hot finished welded type tubes. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 9 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth. |
| 10 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. |
| 11 | Beyond 30 cm girth up to and including 60 cm girth |
| 12 | Cleaning terrace , sunshades,stair lobby etc…including disposal of debris etc… complete |
| 13 | Cleaning floor,bath/wc wall tiles,sanitary fxtures of each block with stone wash acid or detergents as directed by the engineer in charge. |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 15 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 16 | Supplying & setting Concrete well ring of 90 cm dia ,30cm height & average 50mm thick for collecting domestic wastes. |
| 17 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 18 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 19 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 20 | Dismantling all connecions and lifting down 3.0 nos 500 ltr pvc tank as per the direction of the engineer in charge. |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 22 | 25 mm nominal outer dia .Pipes. |
| 23 | 40 mm nominal outer dia. Pipes. |
| 24 | Providing & fixing CPVC ball valve of approved quality |
| 25 | 25 mm dia |
| 26 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 27 | 15 mm nominal bore |
| 28 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 29 | 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms. |
| 30 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 31 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 32 | Providing and fixing PTMT bib cockof approved quality and colour. |
| 33 | 15 mm nominal bore, 122 mm long. Weighing not less than 99 gms. |
| 34 | Repairs to pvc flush tank by replacing syphon system/ pvc float etc..complete |
| 35 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 36 | Semi rigid pipe 32 mm dia |
| 37 | Providing and fixing P.V.C. low level flushing cistern (Cera/Parryware) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 38 | 10 litre capacity - White |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(Sintex or equivalent) |
| 40 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 41 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 42 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 43 | Clearing & cleaning the terrace/wall/AC sheet roofing with pressurewash including the cost of scaffolding etc.complete |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 45 | One or more coats on old work. |
| 46 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 47 | On steel work |
| 48 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 49 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 50 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 51 | One coat. |
