Tender For Comprehensive Maint Under Zone A At Mil Stn Gaya; 1 Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 2 M&L Brick work using old size bricks with sub class B bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 3 Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-charge. 4 M&L for rendering 10mmthick in ceiling on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. 5 M&L for rendering 10mm thick internal surfaces walls on fair faces of brick work or concrete in cm 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. 6 M&L for rendering 15mm thick external surfaces on brick/concrete walls in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement complete all as specified and directed by engr in charge. Note:-WPC measured and paid separatly 7 Supply only integral water proofing compound of approved brand/make.completeall as specified and directed by Engr-in-charge. 8 M&L preparing Old plastered surfaces of wall and applying complete wall with1.0 mm Wallputty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge. 9 M&L preparing newly plastered surfaces of wall and applying complete wall with1.0 mm Wallputty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge. 10 M&L preparing Old plastered surfaces of Ceiling and applying complete wall with1.0 mm thickputty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge. 11 M&L preparing newly plastered surfaces of Ceiling and applying complete wall with1.0 mm thickputty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge. 12 Preparing Old plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed by engr in charge. 13 Preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed by engr in charge. 14 Dismantling stone slab of any description laid beddded & pointed in any mortar complete specified and directed complete all as specified and directed by engr in charge 15 M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed by engr in charge. 16 Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by engr in charge. 17 M&L for glazed ceramic coloured tiles in verticle surface 450mmx350mmx7-8mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed by engr in charge. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE. 18 Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) complete all as specified and directed by engr in charge 19 M&L for 25 mm thick PCC 1:2:4 (20mm graded ) type B0 in levelling course of floor complete all as specified and directed by engr in charge 20 M & L Machine cut Kota stone slab flooring 18-22mm thick over cement screed base laid floor/skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified and directed by engr in charge. 21 M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in C:M 1:4 etc. complete all as specified and directed by engr in charge. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE. 22 S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exceeding 0.36 sqm, infloors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in C:M 1:4 complete all as specified and directed by engr in charge complete all as specified and directed by engr in charge. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE 23 Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by engr in charge. 24 M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc complete all as specified and directed by engr in charge 25 M & L for TMTbars 8 mm dia & over cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by engr in charge. 26 Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. 27 S&F in repair for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or inwalls of 110 mm bore of pipe etc complete. 28 S&F in repair PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or inwalls of 75 mm bore of pipe etc complete all as specified and directed by engr in charge. 29 S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed by engr in charge. 30 S&F PVC (SWR) bends ISI marked any radius of 75 mm borewithaccess door complete all as specified and directed by engr in charge. 31 S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed by engr in charge. 32 PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and directed by engr in charge. 33 PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement complete all as specified and directed by engr in charge. 34 S & F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by engr in charge 35 S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by engr in charge 36 S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without letteredHot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by engr in charge 37 S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by engr in charge 38 S & F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by engr in charge. 39 S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by engr in charge 40 S &F in repair chromium plated Shower rose 15 mm size, 125mm long with armscomplete all as specified and directed by engr in charge. 41 S&F in repair vitreous china wash basin , white , flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets , waste coupling complete all as specified and directed by engr in charge. 42 S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover etc complete all as specified and directed by engr in charge. 43 S&F in repairs vitreous china Orissa pattern size 580mm x440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rest any pattern complete all as specified and directed by engr in charge. 44 S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed by engr in charge. 45 S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by engr in charge. 46 S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by engr in charge. 47 S&F in repair20mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and as directed by Engr-in-charge. 48 Disconnecting existing tanks exc 250ltr but n exc 500ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by engr in charge . 49 Disconnecting existing tanks exc 500ltr but n exc 1000ltrsetting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by engr in charge . 50 S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position complete all as specified and directed by Engr-in-charge. 51 M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by engr in charge 52 S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges complete allas specified and directed by engineer in charge . 53 S&F tubulartowel ring 165mm external dia complete all as specified and directed by engr in charge. 54 S& F in repairs PVC ( SWR ) nahani ntrap / floor trap with grating 75 mm dia complete all as specified and directed by engr in charge 55 S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by engr in charge 56 S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by engr in charge 57 S&F in repair brass CP wall/basin mixer, 15mm bore ,for mixing hot & cold water screw down for iron pipe ,complete all as specified and directed by engr in charge. 58 S&Fin repairs PVC waste pipe size 32 mm X 800 mm flexible with coupling for Urinal/wash basin etc. complete all as specified and directed by engr in charge. 59 S & Fin repair of whiteseat cover for pedestal pattern water closet including fixing bolts complete all as specified and directed by engr in charge 60 S & F sinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by engr in charge 61 Taking down of existing GI Tubing 15 mm dia complete all as specified and directed by engr in charge 62 Taking down of existing GI Tubing 20 mm dia complete all as specified and directed by engr in charge 63 Supplying and laying as in repair of CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/floors complete all as specified and directed by Engr-in-charge. 64 Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/floors complete all as specified and directed by Engr-in-charge. 65 S & F of CPVC pipes MBTA/FBTA fittings such as tee, elbow, socket and Tank union etc of 16 mm outer dia complete all as specified and directed by engr in charge 66 S & F as in repair of CPVC pipes MBTA/FBTA fittings such as tee, elbow and socket etc of 20mm outer dia complete all as specified and directed by engr in charge 67 Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed by engr in charge 68 Taking down chowket or frame with shutter (without taking off shutters from the frames) areaexceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and directed by engr in charge 69 Taking down re-fixing Shutters of any description but exc 1 sq. m and n exc 2 sq. m each in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builders hardware articles, if specially ordered, shall be paid for at supplied only rates complete all as specified and directed by engr in charge 70 M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed by engr in charge. 71 M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed by engr in charge. 72 M&Lfor 35mm thicksecond class hardwood glazed and skelton doorshutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a)complete all as specified and directed by engr in charge 73 M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sidesincluding 5 mm thick edging/beading on exposed to view on sides & topcomplete all as specified and directed by engr in charge 74 S&F 125 mm long Stainless steel butt hinges with steel hinge pin etc complete all as specified and directed by engr in charge 75 S&F 200mm long aluminium anodised barrel tower bolt and fixedcomplete all as specified and directed by engr in charge 76 S&F 150mm long aluminium anodised handle cast type and fixed D Typecomplete all as specified and directed by engr in charge 77 S&Falluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed by engr in charge. 78 S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by engr in charge 79 M&L two coat of synthetic enamel paint over new woodensurfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primerincluding preparation of surfaces complete all as specified and directed by engr in charge. 80 S & F Powder coated aluminium frame/shutters for doors, windows, ventilators sliding/openable etc with joining cleat for fixing, locking arrangement, rubber beading, screws,etc including taking down and making the surface good complete all as specified and directed by engr in charge.Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight(iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. 81 S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. 82 M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed by engr in charge 83 M&L for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified and directed by engr in charge. 84 S&F 5mm thick tinted glass in aluminium doors & windows with rubber packingincluding hacking out old broken glass ( any thickness, size from aluminium beading ) complete all as specified and directed by engr in charge. 85 Taking down existing aluminium doors/windows and re-fixing after tightening loose screw including replacement of unserviceable screw, aluminium beading, rubber packing (including taking down carefully glass panels & re-fixing the same and other hardware fitting such as hinges, tower bolt , handle etc complete all as specified and directed by engr in charge. (Note:- floor door spring,mortice lock,tinted glass will be measured and paid saperatly). 86 S&F in repairs aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 yo 80 kg snf complete all as specified and directed by engr in charge. 87 S&F in repair mortice lock vertical type& 4- levers of 100mm brass body with two keys complete all as specified and directed by engr in charge. 88 M&L for welding in repairs n. exceeding 2.50cm in length thickness of metal to be weldedn.exc 9mm complete all as specified and directed by engr in charge. 89 M&L for welding in repairsexceeding 2.50cm but n.exceeding 5 CM in length thickness of metal to be weldedn.exc 9mm complete all as specified and directed by engr in charge. 90 S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc complete all as specified and directed by engr in charge. 91 S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame complete all as specified and directed by engr in charge. 92 S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed by engr in charge. 93 S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed by engr in charge. 94 S&F 125mm long aluminium anodised handle cast type and fixed D Type complete all as specified and directed by engr in charge. 95 Supply & fixing in repairs 300 mm,Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete. 96 Dismantling of wall and ceiling boards, any thickness including cover fillets complete all as specified and directed by engr in charge. 97 S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by engr in charge. 98 S&F 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system complete all as specified and directed by the Engineer-in-Charge. 99 Dismantling of asbestos cement corrugated sheets as in roof coverings complete all as specified and directed by engr in charge. 100 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. 101 S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc nd similar work conforming to Fe.290. Gde-E-165 complete all as directed & specified. 102 S & F of Pre-painted galvalume aluminum zinc coatingAZ-150 GI based tile profile galvalum sheet 0.50mm thick of red colour as in roof covering/cladding to wall inlcuding cutting, moulding in shape fixed with self tapping screws complete all as specified and directed by engr in charge. 103 Prepainted galvanume aluminium zine coating GI based plain steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws complete all as specified and directed by engr in charge. 104 M&L for 50 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair complete all as specified and directed by engr in charge. 105 M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed by engr in charge. 106 M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cementcomplete all as specified and directed by engr in charge. 107 M & L for providing cement concrete cas in situ 1:2:4, type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including use of formwork complete all as specified and directed by engr in charge. 108 M&L for Cement concrete 1:3:6type C-1 (using 20 mm gradedstone aggregate)75 mm thick as in plinth protections, surface finished even and smooth w/o using extra cement including 3 mm thick glass dividing strip of figured glass , pin headed type, 38 mm wide inserted in position complete all as specified and directed by engr in charge. 109 Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site.
