|
| 1 | B-1/1.28:- Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr.:All kinds of soil |
| 2 | B-1/1.8:- Earth work in excavation by mechanical means (hydrolic excavator)/manual means in foundationtrenches or drains (not exceeding 1.5 m in width or 10sum on plan) including dressing of sides andramming of bottoms lift up to 1.5 mtr taking out the excavated soil and depositing & refilling of jhiri with watering and ramming & disposal of surplus excavated soil as directed with in a lead of 50 mtr. All kinds of soil. |
| 3 | B-3/3.1.6:- Providing and laying in position cement concrete including curing compaction etc. Complete in specified grade excluding the cost of centrering and shutteting -All work up to plinth level (A) 1:4:8 (1 cement 4 coarse sand : 8 graded stone aggregate 40 mm Nominal size.) |
| 4 | (B) M15 grade N.Mix 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm Nominal size.) (B-3/3.1.2) |
| 5 | B-4/4.1 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 6 | B-4/4.13.1:- Providing fabricating reinforcement for RCC work including straingtening, cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor Five level : cold twisted deformed bars (IS:1786). |
| 7 | B-10/10.17.1 :-Grading roof for water proofing treatment withwater proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | B-10/10.22:Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 9 | B-12/12.7:- Finishing with neat cement (punning). |
| 10 | B-14.2.1:-Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. |
| 11 | B-5/5.1.2:- Brick masonry with F.P.S. bricks of class designation 75 infoundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 12 | B-12/12.3.2:- Plaster on new surface on walls in cement sand morter 1:6 including racking of joint etc. Complete fine finished (A) 20 mm thick. |
| 13 | B-12/12.2.2:- Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish :20 mm thick. |
| 14 | B-13/13.1:- Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 15 | B-13.29 Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- Sqm 1568.00 (i) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. (ii) Applying Epoxy primer on the exposed steel bars. (iii) Applying Epoxy hardener and resin mix (as per manufectured\"s specification) on concrete and steel bars with brush. (iv) Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. (v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. (vi) Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. |
| 16 | B-12.35.7:-Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). |
| 17 | B-12/12.22.1:- Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete: New Plastered Surface (three or more coats) |
| 18 | B-12/12.37.1:- Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Newwork(twoormorecoats)overandincludingscrappingandprimingcoatwithcement primer. |
| 19 | B-12/12.42:- Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 20 | B-12/12.46.1:- Painting with enamel paint of approved brand and manufacture to give and even shade : One or more coats on old work. |
| 21 | B-11/11.38.3(A): Providing and laying ofpaver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement) : M-40,80mm thick to be used in medium- traffic ( Medium traffic is defined as a daily traffic of 150-450 commercial vehicles exceeding 30 KN laden weight, or an equivalent of 0.5 to 2.0 MSA for a design life of 20 years.) like city streets, small and medium market roads, low volume roads, utility cuts on arterial roads, etc : Category A Denated units to key into each other on four faces zigzagshape as per IRC SP 63:2004 |
| 22 | B-12.31.2: Pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : Raised and cut pointing. |
| 23 | B-12/12.65: Spray painting in approved shade and approved qualitywith Duco paint of required colour to give even shade with two or more coats by compressor including sand papering, NC putty filler coat etc complete in all respect as per design given by Engineeer incharge on new work. |
| 24 | B-13/13.4.1: Renewing glass panes,with putty and nails wherever necessary : Float glass panes of thickness 4 mm |
| 25 | B-3/3.8:- Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification : |
| 26 | B-13/13.33.(a).(ii) Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged : Style / rail of teak wood 30mm thick/ Aluminium Section 6\" wide |
| 27 | S-2/2.37.1+2.37.3:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)(a) 15 mm dia nominal bore. B Class |
| 28 | (b) 25 mm dia nominal bore. B Class |
| 29 | S-2/2.39.1:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).15 mm dia nominal bore. |
| 30 | (B) 25mm dia nominal bore |
| 31 | S-2/2.3.1:- Making connection of GI distribution branch with GI main including all fitting : Upto 25mm dia |
| 32 | S-2/2.7.4:- P&F bibcock (IS : 8931 Mark) superior quality of approved make : CP Brass long body 15 mm nominal bore |
| 33 | S-2/2.11.2 :- P & F Ball cock (IS : 1703 Mark) with Rod & P.V.C. Ball completeBrass wt. 400 gm. 20mm |
| 34 | S-2/2.12.1:- P&F inlet connection (Angle velves) superior quility of approved make for washbasin Gyset etc. CP intel connection 15 mm Brass (IS: 8931 marked) |
| 35 | S-2/2.15.1:- P&F Full way valve (IS: 778 mark) or wheel valve of approved make. (A) 2.15.1:- Gunmetal 15mm nominal bore |
| 36 | (B) 2.15.3:- Gunmetal 25mm nominal bore |
| 37 | S-2/2.26.3:- P&F PVC storage tank (IS: 12701 marked including the BIS license No.) of approved make with cover,25 mm dia IM long over flowing & 25 cm. Long wash out pipe with plug & socket, including making connection etc. Complete of approved deisgn : (A) 500 liters capacity. |
| 38 | S-3/3.16.3:- P&F rigid PVC pipe (IS:4985 mark) class II (4 KG./cm 2) appoved quality/ make incliding joint the pipe with solvent cement rubber ring and lubricant : 110 ,mm dia |
| 39 | S-3/3.17:- P&F rigid PVC pipe (IS:4985 mark) of appoved quality/ make incliding joint the pipe with solvent cement rubber ring and lubricant : 110 mm dia. (A) 3.17.9:- Bend 87.5˚ |
| 40 | (B)3.17.12:- Vent Cowel |
| 41 | (C) 3.17.15 Pipe clip |
| 42 | Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works withGalvanized box of 1.2 mm thickwith earth terminal with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outletmaking connection , testing , etc. as required. . For specification ofWiring accessories refer ChapterE - 07 related item &For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR(E-7.36) |
| 43 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/ casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR(A) 2x4 Sq.mm +1x2.5 sq.mm(E-4.1.14) |
| 44 | B-9/9.8+9.8.1 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if square,rectangular hollow tubelarsections are used or grill made by flats only |
| 45 | SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .21.7.2 1.0 HP, 1-Ø, (10-120)Mtr, (30-12) LPM E-(21.7.2) |
| 46 | S-3/3.33.4: Supplying & Fixing R.C.C. Manholes covers with frame of approved make (Light duty) : Size 600 X 600mm (Double seal) |
| 47 | B-15/15.29:- Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roofslabs/terrace/balconies/parapet wall etc.with following method/specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work. |
| 48 | B-8/8.31 Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent withpair ofCP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. |
| 49 | H-1.10.3:- Supply of PVC hose pipe of different sizes at store including transportation etc. complete.25 mm dia |
| 50 | H-1.1.4:-Supply of dry manure including loading unloading,transportation & stacking at site.Vermi compost |
| 51 | H-1.2.2:- Supply of Chemical Fertilizers at store in bags weighing not less than 50 kg each including loading unloading & transportation DAP |
| 52 | H-3.1.4: Laying of lawns including ploughing levelingbreaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to be paid separately )maintenance of lawn foe 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost : Laying of Selection No.1 grass tiles (2’X2’ size) for development of garden, including levelling of soil and spreading of manure |
| 53 | H-1.15: Supply of different varieties of indoor plantsin poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete(A)Crotons Bangalore 1.5 to 2 feet (1.15.3) |
| 54 | (B) Rubber plants etc 1.15.4 |
| 55 | (C) Song of India 1.5 to 2.5 feet 1.15.6 |
| 56 | (D) Differentfycus plants tolairy 100mm to 125 cm height 1.15.12 |
| 57 | (E) Arica palm many branches 5 to 6 feet 1.14.4 |
| 58 | (F)Raat Raniin P.B(9”X11”)- 2’-3’1.23.6 |
| 59 | (G) Raffish palm 2 to 2.2 feet 1.14.1 |
| 60 | H-1.17.4:- Supply of flower Garlands & Flower petal’s including transportation at site.(Complete)Rose Garland 1.5 feet long |
| 61 | (A) 1.17.2Merigold Garland B Class ( Small flowers) 1.5 feet long |
| 62 | (B) 1.17.7 Mogra Garland 1.5 feet long |
| 63 | (C) 1.17.8Kunj Garland 1.0 feet long |
| 64 | H-1/1.22.1: Hedges of various varieties : Golden durantain P.B(5”X6”)-6”-1’ |
| 65 | H-1/1.25.1: Different varieties of Shady plants : Height 5’-6’ (14”x14”) Many Branches |
| 66 | H-1.6.2:- Supply of different sized pots at site store including loading unloading & transportation etc. complete. Cement pot 350 mm size |
