Renovation And Modernization Of Protection And Measurement System Of 3 No. Stage-2 Power Houses Of Ubdc Hydel Project, Malikpur By Design, Manufacture, Supply, Erection, Testing And Commissioning Of New C And R Panels Equipped With Numerical Relays , Part I : Supply , Numerical Generator, Generator Transformer, Unit Auxiliary Transformer (Uat) Protection And Bus-Bar Protection Scheme (Complete) With Four Nos 132Kv Feeders Having Disturbance Recording And Sequence Of Event Recording Features For 15.45 Mw Capacity Hydro Machine At Ubdc Ph No.1, Stage-Ii Along With Unit Control, Annunciation Scheme And Aux Relays Mounted On Duplex Type Control And Relay Panels Duly Wired As Per Details Given Under Specifications. , Numerical Generator, Generator Transformer, Unit Auxiliary Transformer (Uat) Protection And Bus-Bar Protection Scheme (Complete) With Six Nos 132Kv Feeders Having Disturbance Recording And Sequence Of Event Recording Features For 15.45 Mw Capacity Hydro Machine At Ubdc Ph No.2, Stage-Ii Along With Unit Control, Annunciation Scheme And Aux Relays Mounted On Duplex Type Control And Relay Panels Duly Wired As Per Details Given Under Specifications. , Numerical Generator, Generator Transformer, Unit Auxiliary Transformer (Uat) Protection Scheme (Complete) Having Disturbance Recording And Sequence Of Event Recording Features For 15.45 Mw Capacity Hydro Machine At Ubdc Ph No.3, Stage-Ii Along With Unit Control, Annunciation Scheme And Aux Relays Mounted On Duplex Type Control And Relay Panels Duly Wired As Per Details Given Under Specifications.. , Cubicle Panel (Sensor/Transducer Panel) Having Arrangement To Convert Analog Low/High Signals From Various Rtd/Temperature-Transducers And Integrating The Signals With Local Scada Of This Scheme. Also Included, An Annunciator For Alarm Or Trip Signals Emanating From Temperature Transducer And Provision Of Stator Temperature Scanner On This Panel (Scada Integrated), As Per Specifications. (For Ubdc Ph 1, 2 & 3) , New Control/Synchronizing Desk With Unit Control System For Operation Of Machine And Fixed Auto/Manual Synchronization Systemas Per Specifications. , Operator Scada Station In Control Room For Operational Control, Viewing Real Time Trends Of Various Parameters, Accessing The Data Of Event/Disturbance Recorder And Including Printer, Cables And Related Mounting Base Furniture. , Engineering Station (Laptop) For Each Power House To View/Modify Relay Settings Or Access Data Of Event/Disturbance Recorder, As Per Specification Including Requisite Cables For Communication And Printer. , Control Cables Required For Installation Of Above Detailed Panels/Equipments , Field Instruments And Transducers , Set Of Spares As Per Clause 1.18 Of Technical Specification Section Iii. , Part Ii : Dismantlement,Erection, Testing And Commissioning , Dismantlement Of Existing Panels, Cables, Control Desks, Instruments, Equipmentetc For The Purpose Of Replacement Anderection, Testing & Commissioning As Detailed In Technical Specifications & Scope Of Work
