Tender For Construction Of Samajbhavan At Bhosala Vihar Colony In Pr. No.18 - Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of50m.beyondthebuildingareaand stacking and spreadingas directed,dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. By Mechanical Means(Spec. No. : Bd.A. 1 Page 259/CSR I Page No. 148) 3 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of50m.beyondthebuildingareaand stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. By Mechanical Means(Spec. No. : Bd.A. 1 Page 259/CSR I Page No. 148) 4 Providing soling using80mm sizetrapmetalin15cm.Layer includingfilling voidswith Crushed sand/grit, ramming, watering etc. complete. 5 Providing and laying Castinsitu/Ready Mix cement concrete in M- 10oftrap/granite/ quartzite/gneissmetalforfoundationand beddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfully automaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 6 Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalforR.C.C.work infoundationslike raft,stripfoundations,grillageand footingsofR.C.C.columnsand steelstanchions etc.includingbailingoutwater, Steel centering formwork,laying/pumpingcoverblocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 7 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20 oftrap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).withfullyautomaticmicroprocessorbasedPLC withSCADA enabledreversibleDrumTypemixer/concreteBatchmixplant(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 8 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20 oftrap/granite /quartzite/gneissmetalforR.C.C.beamsandlintelsasperdetailed designsanddrawingsoras directed including steel centering, formwork,cover blocks,laying/pumping,compactionand roughening the surface if special finish is to be provided and curingetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabledreversibleDrumTypemixer/concreteBatchmixplant(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 9 Filling in plinth and floors with contractorsmaterial /brought from outsideandapprovedbyEngineerinchargeinlayers of15 cmto 20cmincludingwateringandcompactionetc. complete. 10 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/ quartzite/ gneissmetalforbedblocks, foundationblocksand suchotheritems includingbailingoutwater, Steelcentering,formwork,laying/pumping,compacting, roughening themifspecialfinishistobeprovided,finishingunevenand honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc.(Woodencenteringwillnotbeallowed.),withfully automaticmicro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 11 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20 oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandings asper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish isto be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 Providing secondclassBurntBrickmasonrywithconventional/I.S. typebricksincement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. 13 Providingsecond class Burnt Brick masonry with conventional/ I.S. typebricksincement mortar1:6insuperstructureincluding strikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 14 Providing secondclassBurntBrickmasonrywithconventional/I.S. typebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 15 Providing internal cement plaster 12mmthick in single coat in cementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 16 Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:5without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete 17 Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. 18 Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. 19 Providingandapplyingtwocoatsofexterior weathershieldpaintof approved manufactureandofapprovedcolourtotheplastered surfaces including cleaning ,preparing the plastersurface ,applying primercoat,scaffoldingifnecessary,andwateringthesurfacefortwo daysetccomplete. NOTE: ForItem Number 15 to 18 prior approval of Superintending Engineer will be necessary 20 Providingandapplyingtwocoatsoflead/zincbaseoil paint/ bituminiouspaintofapprovedcolour to new structural steel work andironworkinbuildingsincludingscaffoldingif necessary, cleaningandpreparingthesurfaceetc. complete.(excludingprimer coat). 21 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre asperdrawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete. 22 Providingandfixinginposition.(asperI.S.1868/1982)Aluminium slidingwindowoftwotracks with rectangular pipehavingoverall dimension63.50x38.10x1.02mm atweight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm atweight0.695Kilogram/Running metre.Top andside track section61.85x31.75x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10mmatweight0.469Kilogram / Runningmetre.Andhandlesection 40x18x1.25mmatweight0.417Kilogram/Runningmetre.andtop section 40 x 18 x 1.25 mm at weight 0.417 Kilogram /Runningmetre.As perdetaileddrawingsandasdirectedbyEngineerincharge with allnecessaryAluminium sectionsfixturesandfasteningssuchasroller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. 23 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 24 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panelswithoutventilatorasper detaileddrawingexcludingthedoorframe,stainlesssteel fixtures and fastening and finishing the wood work with oil painting 3 coats complete 25 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12mmwithrollerwheelsconfirmingtogradeF.G.150fittedwithsnapheaded rivetsof minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clearspaceof150mmbetweentwo setsofcrossingswithholdfasts,stoppers,spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). 26 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 27 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 28 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4cementmortarincludingneatcementfloat,fillingjoints,curing andclearing etc. complete. 29 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete 30 Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP- 42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. 31 Providing and fixing board displaying information, such as Name of work, Tender cost,NameofContractor,Workcompletionandliability periodetc,havingrectangularshapeof1.20mx0.90msize madeout18 gauge(1.25mm)thickmildsteelsheetpaintedwith onecoat ofZinc chromate stoving primer and two coats ofenamelpainton front side and greystoveenamelonbacksideandborder/messages/symbolsetc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3mmframewithproperlycrossbracedM.S.anglesofsize 35mmx35mmx3mmdulypaintedincludingTwoM.S.angleironpostsof size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x75cmincluding, excavation, refilling, transportation, and labour etc complete. Spec. Number As directed by Engineer in Charge 32 TransportationofMaterialobtainedfromdebriesofvarioussorts including necessary excavation / loosing including loading,unloading and conveying and disposing as directed.
