SPECIAL REPAIRS TO CERTAIN BLDGS IN UNIT LINES UNDER B/R-II FOR GE (SOUTH) AMBALA CANTT; 1 Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed 2 Supply & fixing Steel water tubing of 15 mm bore, medium grade galvanized, ISI marked with all fittings laid in floor with wall and on ceiling, complete all as specifiedand directed. 3 Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed 4 Supply & fixing Steel water tubing of 20 mm bore, medium grade galvanized, ISI marked with all fittings laid in floor with wall , complete all as specifiedand directed . 5 Material & Labour for cutting chases for concealed water tubing and making good, (cutting not exceeding 10 cm girth) (brick walls) in cement mortar (1:3), complete all as specified. 6 Material & Labour for PVC water storage tank 500 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified.including dismantling of old tanks ofany description complete all as specified. 7 Material & Labour for PVC water storage tank 1000 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified.including dismantling of old tanks ofany description complete all as specified. 8 S & Fin repair Chromium plated (CP)grating round 100/125 mm size as in repairs all as directed 9 Supply & fixed (in repair) 15mm fancy type, chromium plated, angle cock,/ stop cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified.(Note : Weight of stop cock shall not be less than 0.575 Kg) 10 Supply & fixed (in repair) stop cock, fancy type, chromium plated, long sank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified.(Note : Weight of stop cock shall not be less than 0.575 Kg)(Note : Weight of stop cock shall not be less than 0.575 Kg) 11 Supply & fixed ( in repair)CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated`with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg) 12 S&F in repair Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. 13 S&F (in repair) CP Wall Mixer 2-in-1 with Flange screwed down for iron pipe and fixed complete all as specified and as directed. Make : PARRYWARE : Uno (Quarter-Turn Range with Ceramic Inner-Head) Cat Part No.T5016A1 14 S&F in repairs Chromium plated shower roses 125 size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. 15 S&F in repair toilet paper holder chromium plated all as specified and directed 16 S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. 17 supply and fixingsoap dispenser with glass bottle fixed with and including chromium plated brass screws complete all as specified. Make : PARRYWARE :Cat Part No. T6706A1 18 S&F in repair Soap dish, any type, fixed to plugs with chromium plate brass screws complete as specified and directed by Engr in charge. 19 Supply and fixing Chromium plated hand shower (Health Faucet) with 8mm dia, 1metre long flexible tube & wall hookcomplete all as specified and directed Make : PARRYWARE :Cat Part No. T9875A1 20 Supply & fixing in repair of 5.5 mm thick bevelled edge looking mirror of, selected quality and glazing wooden beadin square/ rectangularexc 0.5 Sq m each in panes, mounted on 6 mm thick AC bldg board or commercial plywood, fixedwith aluminium angled frame and two CP MS hanging arrangements all complete all as specified and directed. 21 S&F, in repairs, 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg Board or commercial plywood, fixedwith aluminium angled frame and two CP MS hanging arrangements all complete. 22 S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brackets guard and railing 60cm long fixed in repairs complete as specified and directed by Engr in charge. 23 Supply & fixing in repair PVC connection 450 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe all as specified. 24 S&F in repair 32/38 mm PVC waste pipe for urinal , wash hand basin and sink all as specified. 25 Supply and fixing in repair floor mounted coupled WC ,bowl for coupled WC with US soft close slim seat cover, Hinges, cistern fixed accessories and accessories set, size 695 x 385 x 770mm P trap size 180mmcomplete all as specified and directed. Make : PARRYWARE : Omega Cat Part No.C8906(S-300) 26 Supply & Fixing bottle trap with fully casted body (with internal partition) 32mm with 190mm & 125mm long connecting pipes & wall flange complete all as specified and directed.Make : PARRYWARE :Cat Part No. T3203A1 27 Supply & fixed (in repair) vitreous China wash hand basin with pedestal of any colour flat back of size (560 x 470 x 805mm) including CI brackets and PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including32 mm dia PVC waste pipe etc., complete all as specified. Make : PARRYWARE : Inslim Cat Part C8924 for Basin & C8925 for Pedestal-Long 28 Supply and Fixed (in repair) for vitreous China squatting pan of Orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of anypattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified. 29 Supply & fixed (in repair) vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified. 30 Supply & fixed (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap, PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including32 mm dia PVC waste pipe etc., complete all as specified. 31 S & F Vitreous china urinal half stall back or corner type complete incl providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge 32 Supply & fixed in repair 10 litre capacity flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified. 33 S&F in repair for fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Make : Jaquar/ Cera/ ESS ESS/GEM 34 Supply and fixingBall brass valves, of 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed as in repairs 35 Demolition and breaking up drain pipes100/75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified. 36 S&F PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall /floors or in trenches etc complete as specified and directed by Engr in charge. 37 S&F PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or in floor complete as specified and directed by Engr in charge. 38 S&F PVC (SWR) bends 110 mm bore complete as specified and directed. 39 S &F in repair PVC (SWR) bends of 75mm radius 40 S & F PVC (SWR) vent cowl of 75mm dia complete as specified and directed by Engr in charge. 41 S& F PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door all as specified . 42 S &F in repair 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door 43 Blank 44 M & L PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer diameter outlet of 75mm as in repairs complete as specified and directed by Engr in charge. 45 Demolition of brick work built in cement mortar including all quoins pillars etc complete all as specified . 46 Material andlabour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), with necessary scaffolding etc complete all as specified and directed. 47 Material & Labour for Brick work with sub class ‘B’ bricks, (Except brick) locally known as “Awwal” straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6), complete all as specified., complete all as specified. 48 Taking down cement plaster from brickorconcrete surfaces including raking out joints, hacking keys, scrubbing down with water etc. complete all as specified and as directed. 49 Material and labour for rough cast plastering including 15 mm thick rendering in CM 1:3 complete as specified in SSR Part I, clause 14.22.(Note : Rough cast finish to be as below :-After applying the under coat of cement mortar 1:3 and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even.The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. 50 M&L for 15 mm thick rendering on brick or concrete surfacesin CM 1:4with , finishing the surface even and smooth without using extra cement.(Note: to use only Yamuna sand ) 51 M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified. 52 M&L for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement. Complete all as specified and directed. 53 M&L for 10mm thick rendering on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified. 54 Material andLabour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. Carrying out efflorescence treatment to exposed and prepared wall surface in the following sequence.(a) Prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent : -(i) Pidicrete URP of M/S Pidilite. (ii) Sika Latex of M/S Sika.(iii) Nitobond SBR Latex of M/S FOSROC.(b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied “BY HAND” while the prime is tacky. PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer’s instructions: -(i) Pidicrete URP of M/S Pidilite.(ii) Sika Latex of M/S Sika.(iii) Nitobond SBR Latex of M/S FOSROC. 55 (c) PMM surface should be allowed to dry for one day. After that it should painted with two coats of one of the following compound mixed with cement only in ratio of 1 (selected compound) : 1:5 (Cement) : - (i) Pidicrete URP of M/S Pidilite.(ii) Sika Latex of M/S Sika. (iii) Nitobond SBR Latex of M/S FOSROC.(d) Now apply two coats of one of the following compound over the surface. These compounds are to be used as per manufacturer’s instructions: -(i) Pidifin 2K of M/S Pidilite(ii) Brush Coat of M/S Sika.(iii) Brush Bond of M/S FOSROC. (ii) Every stage of work will be approved by GE, then only next layer will be executed by contractor. NOTES : (a) The efflorescence treatment shall be carried out by the manufacturer or his authorised representative only. (B) The efflorescence treatment shall be carried out after taking down existing plaster redoing external/internal plaster under respective Items. (b) Make: Pidilite, DR Fixit or Equivalent make as approved by GE. 56 Material & Labour for two coats of oil bound distemper over a coat of primer incl preparation of new plastered surfaces of walls and applying 3mm thick (Minimum) white cement based wall care putty in two coats, finished even and smootcomplete all as specified. 57 Material andlabour fortwo coats of exterior emulsion paint, on new surface on walls, chajjas etc over a coat of primer of same manufacturers of as emulsion including necessary scaffoldings upto 12 mtr or more height, complete all as specified and directed. 58 M&l for two coats of cement base paint over a coat of alkali resistant primerof new surfaces of walls and incl preparationcomplete all as specified. 59 M&L for two coats of oil bound distemper incl preparationof new surfaces of ceiling complete all as specified and directed. 60 M&l for preparing old surface on wall and applying one coats of cement base paint over a coat of alkali resistant primercomplete all as specified. 61 M & L for preparation and complete removal of existing old plastered surface of wall and applying twocoats of oil bound distemper incl chalk whitener and one coat of putty etc complete all as specified and directed. 62 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debris out side defence area complete all as specified and directed. 63 Material and labour for Premium quality, glazed coloured ceramic tiles 600 x 300 x 7mm thick on vertical faces including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified. 64 Material & Labour for Verified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand includingcement screed bed 15mm thick in screed bed (1:4) base, complete all as specified. 65 M&L for Vitrified ceramic tiles 10mm thick (square / rectangular) polished, light shade as in skirting / dadosetc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl. 10mm thick backing coat in CM 1:4 complete all as specified and directed. 66 Material & Labour for Non - skid coloured Ceramic tiles (400x400mm) 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includingcement screed bed 15mm thick in screed bed (1:4) base, complete all as specified. 67 M&L forcoloured glazed ceramic tiles coloured (300x 450x 7mmthick) in vertical surfacesand jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 complete all as specified and as directed. 68 M&L 20 mm thick black granite (of any type)(table rubbed and polished) in steps, jambs, pillars, window cill, cooking, set in 10MM thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed. 69 Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongery hold fasts etc., complete all as specified. 70 Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), areaexceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as spd. 71 Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 75 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantNote: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 72 Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantNote: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 73 Supply and fixing ofFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws 74 Supply and fixing of providing30 mm thick factory made 100% Solid WPC (Wood polymer Composite) Jointless gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),calcium Carbonate and natural fibres ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminium Jali and Stainless wire mesh as per required. complete all as specified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company 75 S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised .complete as specified and directed . 76 S&F 200mm long aluminium anodised barrel tower bolts of extruded section .complete as specified and directed . 77 S & F 300mm, ordinary rat tail rod pattern springs including roller and roller plate completeif fixed to steel/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete as in repairs 78 Supply & fixing250 mmaluminium anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminium alloy, complete all as specified. 79 Supply & fixing aluminium anodised extruded fabricatedtype handle 100mm long complete all as specified & directed. 80 Supply & fixing150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed. 81 Supply & fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm longand fixingwith bolts extruded sections complete all as specified & directed. 82 Supply & fixing of stainless steel butt hinges 100 mm long medium weight completeall as specified & directed. 83 Supply & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished with suitableprovision for Window AC including taking down of existing window completeall as specified and directedby the Engr-in-Charge (Make:A2Z Infra Solutions/ Elixir Met form Pvt Ltd./ Urban Spaces) 84 Supply and fixing in repair stainlesssteel curtain rod (Grade 304) 25mm dia having wall thickness 1.6mmfixed with and including stainless steeldecorative brackets, two lotto for each rod length at both endetccomplete all as specified and as directed by the Engineer-in-Charge. 85 Providing & fixing of three shutter vajra series Sliding Windows made of Pre PaintedSteel and Galvanised Steel (Base Steel as per IS 513,D quality ,galvanised as per IS 277 with zinc of 120 GSM),using factory made section powder coated with pure polyester powder up to 50-60 microns thick with total coated thickness of 0.58mm for outer frame and 0.58mm thickness for Sliding Shutter Section, the outer frame for three tracks with grill provision size of 107mm x 44 mm and the window shutter section of 58 mm x 36 mm and the outer frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the shutter / sash frame and also have a groove of 21mm x 5mm to provide additional track and facilities with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass reputed make and fixed with EPDM weathering seal resistant accessories and S.S. Mesh for fly mesh shutter (304 grade) incl handle made of aluminium 1 Nos per each shutter and cut to length mitre jointed with corner brackets including installation of window system at site using anchor fasteners ,inclusive of conveyance of all materials accessories ,labour charges and erection at site with complete finished item of work including taking down of existing window. Complete all as specified. (Make:A2Z Infra Solutions/ Elixir Met form Pvt Ltd./ Urban Spaces) 86 S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Complete as specified and directed 87 M & L for cleaning the roots top surfaces, brick tiles or concrete surfaces by picking, vegetation roots, sweeping clean and washing down with water to remove dust etcand filling & damaged joints of brick tiles in CM 1:4 complete all as specified. 88 Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 89 M&L 40mm thick average thicknessPCC (1:2:4) type B-0(using 12.5mm graded stone aggregate) as in roof padding, levelling course and finishingtop surfaces even and smooth using extra cementto receive APP membrane , complete all as specified and directed 90 Material and labour for providing 3 mm thick APP(Atactic polypropylene polymer) modified prefabricated five layer, weight not less than 3.6 Kg/Sqm water proofing membrane, black finished, reinforced with Non-woven polyester matt make as approved over roof consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25º C temperature and viscosity 70-160 Cps. over the primer coat of industrial bitumen 85/25 @1.2 ltr/kg, the layer membrane shall be using butane torch and sealing all joints etc. after preparing the surface complete as per standard practice as per manufacturers instructions all as specified and directed.The vital physical and chemical parameters of the membrane shall be as under : -(i) Joint strength in longitudinal and transverse direction at 25º C as 650/450 N/5 Cms.(ii) Tear strength in longitudinal and transverse direction as 300/250N/5 Cms. Softening point of membrane not less than 150º C cold flexibility up to 20º when tested in accordance with ASTM (D-5147).(iii) The laying of membrane shall be carried out through the manufacturer or their authorized applicator only with Guarantee of 10 years by contractor. 91 M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed 92 Supply and fixing in repairs of 10 mm thick colour/laminatedPVC flitted sheet hollow interlocking wall panelling of width 250/300 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC U and L beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panelling including cover fillets of any type and thick complete all as specified and as directed. NOTE: - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings etc and making good to match with existing surface effected for this area etc complete all as specified and directed. n of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. Make : Decoinn, Giza, Rajshree 93 Supply and fixingof 5 mm thick solid coloured/textured PVC sheet, SolidPVC wall panelling/ liningPVC sheet inclusive of solvent cement and fixing at site with and including5 mm thick PVC sheet fillets of width 35 mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down ofexisting wall lining, board or insulation boardincluding cover fillets of any type and thick complete all as specified and as directed. NOTE: - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings etc and making good to match with existing surface effected for this area etc complete all as specified and directed. n of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. 94 Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqmincluding both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, crossT of size 15 x32 mm of length 1200mmand secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiling using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm.galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws.The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed. 95 Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified and directed. 96 S&F structural rolled mild steel Fe 410-00 (Gde E-250) as in roof trusses(framed), trussed, purlin,, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat section)including distance pieces, cleats etccompleted all as specified and directed. 97 M/L two coat of synthetic enamel paint on new steel surfaces of any description, over 10cm in width or girth, not otherwise described incl preparation of surfaces all as specified 98 Supply andfixing of pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa tensile strength as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc complete including dismantling asbestos cement corrugated or semi-corrugated sheets etc; complete all as specified and as directed. 99 Supply andfixing of pre-painted galvalume aluminium zinc coating GI based galvanised plain mild steel sheeting 0.50 mm thick of any colour, having 550 Mpa tensile strength as in roof covering/ ridges and fixed with self tapping screws or J type hooks including rubber washer etc complete including dismantling asbestos cement corrugated or semi-corrugated sheets etc; complete all as specified and as directed. 100 Supply andfixingof rolled mild steel works as in bands, straps, wind ties, angle cleats and similar small articles etc conforming to Fe-290 Gde E-165 including dismantling existing mild steel complete all as specified and as directed. 101 Supply and fixing in repairs sink made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever MS/PVC brackets and connecting union to pipe over all size 485x420 mm bowl size 410x330x160 mmafter taking down sink as existing at site complete all as specified and as directed.. 102 Supply and fixing in repair stainless steel plate rack of size approx 750x 600x 250mm made out of 1.0 mm thick steel sheetafter taking sown sink as existing at site complete all as specified and as directed. 103 Material and labour for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in plinth protection finished surfaces even and smooth without using extra cement and joint will be filled by mix of 85/25 bitumen and sand complete all as specified and directed. 104 M&L for 50mm thick Cement Concrete 1:3:6, type C-2( Using 40 mm Graded Stone aggregate-gate) as in plinth protection, laid in alternate bays , finished Concrete Surfaces Even and Smooth without using Extra Cement, expansion joint filled with 85/25 bitumen & saw dust as complete as specified and directed. 105 Demolition of cement concrete(un-reinforced) of any descriptions, in ground floors not exc 150mm thick, above or below ground level complete all as specified and directed. 106 M&L for 100 mm thick PCC 1:3:6 type C-2 (using 40 mm grades stone aggregate)as in subbase of floor, etc complete all as specified and as directed. 107 M & L for Sand filling/ cushioning in floors including levelling, watering and consolidation, complete all as specified and directed 108 M&L for Machine pressed precast concrete inter locking paver blocks of any shape andsize conforming to IS 15658- 2006of 60 mm thick M-35 grade with grey cement andpigment ,including removing of debris out side MD land complete all as specified and directed.. 109 M & L for PCC 1:4:8, type D2 using 40mm graded stone aggregate 75mm thick as in subbase for laying floor finishes, complete all as specified and directed 110 M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment with designed pattern, complete all as specified and directed 111 Surface Excavation in soft and loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed. 112 M & L for hardcore of gauge n. exc. 63mm deposited spread, levelled in layers n. exc. 15cm thick watered & rammed to a true surface. 113 Excavating in trenches not exc 1.5 mtr wideand depth exc1.5 mtr but n.exc 1.5 min depth, and getting out insoft/ loose soil. 114 Removing excavated soil n.exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil. 115 Removing excavated material exc 500m but n exc. 1500m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified and as directed 116 M& L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in lean concrete. 117 Supply & fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified. 118 Supply & fixed factory made 30 mm PVC rigid foam panel door shutter made from mild steel tubular frame of size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top & bottom rails and covered with 5 mm thick head moulded PVC channel having width of 50 mm to form stiles & PVC street of width 75 mm to form rock rail, bottom rail & top rail or either side having panels inserted with 5 mm thick PVC sheet sealed with solvent cement adhesive to the stiles and rails with 5 mm x 25 mm PVC sheet beading on either side including three Nos. aluminium hinges for each door complete all as per manufacturer instructionscomplete all as specified. 119 Supply, fabricate and fixing in repair position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5.5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed.(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831)(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832)(c) Top & side Members of shutter Section shall beof size 18.00 x 40.00 x 1.55 (Section No 20738)(d) Shutter Interlock Section shall beof size 18.00 x 40.00 x 1.45 (Section No 20737)(e) Bottom Members of shutter Section shall beof size 18.00 x 40.00 x 1.55 (Section No 20736)Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mentionedin relevant Appx 120 Supply andfixing (in repair) aluminium alloy anodized (powder-coated) door frame and partly glazed shutters with hollow aluminium anodized sections including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip, jointing cleats, rubber packing, gasket, dead lock 4 levers, 02 Nos aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members etc. with rawl plugs complete all as specified and directed. Sections of frame and door shall be as follows : -(a)Door Frame single groove 101.6 mm x 44.45 mm x 2.15mm thick (b)Shutter top 47.62 mm x 44.45 mm x1.95 mm thick. (c)Shutter bottom 114.30 mm x 44.45 mm x 2.1 5mm thick.(d)Shutter vertical 85 mm x 44.45 mm x 1.80 mm thick.(e)Shutter middle 83.5 mm x 44.45 mm x 2.40mm thick.(f) Gauging clip weighing not less than 0.097kg/metre.Notes :-1.Glass pane shall be measured and paid separately.2. Manufacturers of section : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or equivalent make as specified in appendix B. 121 Supply and fixingof 5 mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC U and L beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panellingincluding cover fillets of any type and thick complete all as specified and as directed.NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. 122 Dismantling/taking down carefully aluminium/ copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls, ceilings etc. complete all as specified and directed. 123 Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flushboxes made out of 1.2mm thick of any module from 2 to 18module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paintincluding modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbedsurfaces as per existing for one light / fan / Bell point controlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed.NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately.2. All chases will be cut by chase cutter only. 124 Description all as per item 122 here in before but for socket out let point 5 Amps on same board complete all as specified and directed. 125 Description all as per item No 122 here in before but for socket out let point 5 Amps on independentboard complete all as specified and directed. 126 M&L for point wiring with FRLSH PVC insulated and unsheathed cable 1.5 Sqmm (nominal area) ISI marked multi-stranded copper conductor single core including minimum 20mm dia medium grade PVC conduit concealed in wall / false ceiling, consisted metal flush boxes, including white cover plates with frame for fixing of modular switches/sockets etc with all accessories inducing 15 Sq mm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly including colour codingof cable shall be Phase - Red, Neutral- Black and Earth- Green complete all as specified and directed by Engr-in-charge for Notes: Cost of making good disturbed surfaces matching with existing shall be deemed to be included in the quoted rate 127 One light/fan point/Exhaust fan controlled by one, one way switch 6 amps. 128 One 5 pin, 5 Amp switch socket out let on the same board with other switches 129 M&L for point wiring with FRLSH PVC insulated and unsheathed cable 4 Sqmm (Nominal area) stranded copper conductor single coreincluding ISI marked 20 mm dia medium grade PVC conduit for point wiring, concealed in wall/metal flush boxes including white cover plates and frame for mounting switch/socket (modular) with all accessories including 4 Sqmm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly for one 20 Amps AC switch socket out let point on an independent board including colour coding of cable shall be Phase- Red, Neutral-Black and Earth- Green complete all as specified and directed by Engr-in-chargeNotes: Cost of making good disturbed surfaces matching with existing shall be deemed to be included in the quoted rate 130 S&F modular switch flush type, 5 Amps, single pole, one way 1 module complete all as specified and directed 131 S&F modular socket, 5 pin, 5 Amps, multipurpose 2module complete all as specified and directed 132 Description all as per srl item No 124 above but point wiring for one socket out let 15&5 Amps (independent) controlled by one switchwith using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed. 133 Supply and fix modular switches, one way,6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. 134 Supply and fix modularswitches, oneway, 16Amps, one module, 230 volt , AC supply, complete all as specified and directed. 135 Supply and fixmodular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed. 136 Supply and fix modular socket outlet 6/16 amps,3 pin, 2 module, complete all as specified and directed. 137 Supply and fix fan regulator step type one module / 2 module, 100w 230 Volts, 50 Hz, AC complete all as specified and directed. 138 Supply and fix modular switches, bell push,6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. 139 Supply and fix modular blanking plate 1 module complete all as specified and directed. 140 Supply and fix ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. 141 Supply and fix door bell electric ,ding dong /musical type, single phase 230 volts, ISI marked complete all as specified. 142 Supply only lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed. 143 Supply and fix sheet metal enclosure SP with two pin and earth plug and socket including metal clad topwith one single pole MCB 32 Amp complete all as specified and directed. 144 Supply and fixing of LED light fitting 1x20W (lumen efficacy of >100 lm/W) , 220V, AC with aluminium housing with batten type with driver , holder including 20W LED tube light for connecting up with three core flexible copper conductor cable of suitable size from celling rose to connector complete all as specified and directed 145 Supply and fix batten type withsurface mounted LED tube light fitting with high efficient diffuser mirror light, aluminiumhousingin CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. 146 Supply and fixbulk head light fitting, 10 watt, energy efficient withlamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting completeincluding disconnecting and taking down old existing light fitting of any descriptioncomplete all as specified and directed. 147 Supply and fixbracket for security light made up of 25/40/50mm dia suitable for security light, 0.6 metre long GI pipe,light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed. 148 Supply and fix LED security light luminaire 30 watt , pressure die cast aluminium housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiple LEDshaving optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mmcopper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down oldunserviceable security light fitting of any description and in any positioncomplete all as specified and directed. 149 Material and labour for sub main wiring with two single core FRLSH PVCinsulatedunsheathed copper conductor cable 6sqmm drawnin and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories onwall or ceiling withone additional PVC insulated , strandedcopper conductor FRLSHof 6 sqmm, green colourfor earthcontinuity conductor including taking down old unserviceable sub main wiringand making good the disturbed surface complete all as specified and directed. NOTE:-3 run of 6.0 sqmmcable with concealed conduct shall be measured as 1 unit. 150 Material and labour for sub main wiring with two single core FRLSH PVCinsulatedunsheathed copper conductor cable 4 sqmm drawnin and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories onwall or ceiling withone additional PVC insulated , strandedcopper conductor FRLSHof 4 sqmm, green colourfor earthcontinuity conductor including taking down old unserviceable sub main wiringand making good the disturbed surface complete all as specified and directed. NOTE:- 3 run of 4.0 sqmmcable with concealed conduct shall be measured as 1 unit. 151 Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and includingMCCB 4 pole thermal release type ,125AMPS ,25 KAas incomer and MCB sas out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed. 152 Supply and fixing in repairSPN distribution board 8 way, double door, IP 43, as per IS 8623including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets complete all as specified and directed. 153 Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, B curve 6 to 32 Amps, ISIcomplete all as specified and directed. 154 Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, B curve 40 to 63 Amps, ISI marked complete all as specified and directed. 155 Supply and fixing in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz,B Series complete all as specified and directed. 156 Supply and fixing recess/ surface mounted LED flat panel 2 x 2 with high efficient LEDs and glare free full decorative light fitting, 36 watt, energy efficient provided withincluding LED36 watt withprovision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and completeincluding disconnecting and taking down existing light fitting and removal complete all as specified and directed. 157 Material & labour for earthing with Galvanised Steel earth plate electrode 60cmx 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by usingGalvanised Iron wire 4mmas earthing lead(upto terminal point) by means ofbolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm diaGI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6)type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type ofsoil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 ofSSR 1991(Part-I) Taking out old unserviceable earthing complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire mesh, CI cover, etc shall be deemed to beincluding in quoted rates. 158 Supply and lay cable XLPE Insulated screenedPVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4core. 159 Supply and fixing of LED lamp 9 watt B-22 base with 3 to 4 hours battery back up, complete including taking down old existing lamp any type complete all as specified and directed. 160 Supply and fixing of LED based Bollard light not less than 15 Watt warm white with powder coated PDC aluminium body with glare free PMMA Diffuser, IP 65 of height not less than 1000mm and dia not less than 65mm including necessary excavation & PCC block of size 250mmx250mmx250mm etc complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. 161 Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable circular of size 10Sqmm including all incoming and outgoing connection with proper size of thimble complete all as directed and specified. 162 MCB DB sheet enclosure Double Door, single pole and neutral 240V with 100 Amp suitable size plate and common neutral link all fixed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 as per IS 8629 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed 163 S&F in repair single pole and neutral enclosure with 2 pin plug and socket with one MCB 32 Amps, 10KA C curve complete all as specified and directed. 164 S&F MCB, single pole & neutral, 240 Volts 40-63 Amps, 10KA C curve complete all as specified and directed 165 SAF MCB, single pole, 240 Volts (05 to 32) Amps, 10KA C curve complete all as specified and directed 166 S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size 167 Supply and fixing LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. 168 Excavation in trenches in soft/loose soil n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation of poles, cable laying etc, including forming bottom surface to required level all as specified and directed. 169 Returning, filling in soil/loose soil including spreading, levelling watering & well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge 170 Removing of surplus spoil to a distance not exceeding 50m and depositing where directed at a level not exceeding 15m above the starting point complete all as specified and directed by Engineer-in-Charge. 171 Material and labour for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick alter laying of cable to trenches and punning down complete all as specified and directed by Engineer-in-Charge 172 Material and labour cover to underground cable with one laver of bricks using sub class B bricks laid flat across the cable complete all as specified and directed by Engineer-in-Charge. 173 Note:-Amount of credit ofRs. 1,80,105.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 24 & 25 of tender documents in pdf form which will be deducted offline while acceptance of tender.
