Construction Work Of Open Gym At Panchayat Ground (Near Dharmshala) Of Village Magho Majri, Distriet Kaithal, State Haryana -- 1 NS Itmes 2 Air Swing:Providing, designing and fixing of airs swinging pair ofsize 1150x900x1250 mm fabricated with main post of140mm dia and 3.00 mm thick and other pipes of 40mmdia 3.00 mm thick all pipes made up of hot rolled tubularMS pipe and powder coated using Akzo Nobel orequivalent of 80-120 micron thick. All welding joints ofpipe are well welded with joints scalloped as necessaryand dressed off removing sharp edges and burrs. Zincprimer paint to be applied at all welding points prior tofinishing. Seat and Base plate cover shall be made upof virgin LLDPEmanufactured by rotational mouldingwith minimum thickness of plastic 4.00mm, colourfuland UV resistant environmental friendly.Bearing usedshall be maintained free, duly oiled sealed andselflubricated made by reputed company to beapproved by Engineer-in-Charge. Equipment to befitted within built limiters to prevent unwantedmovements. All open ends of pipe to be coloured byGI/LLDPE caps for user safety. The equipment to befixed on ground with concrete of minimum strength M25and J shaped welded bolts and once the concrete is set,Each 14000.00fix the equipment on to it and cover nuts andbolts withthe base plate cover, all complete as per direction andapproval of Engineer-in-Charge regarding material,shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc 3 Pull Chair:Providing, designing and fixing of Pull pair of size 2500X 800 X 2000 mm fabricated with main post of 140mmdia and 3.00 mm thick and other pipes of 40mm dia3.00mm thick all pipes made up of hot rolled tubular steeland powder coated using Akzo Nobel or equivalent of80-120 micron thick. All welding joints of pipe are wellwelded with joints scalloped as necessary and dressed offremoving sharp edges and burrs. Zinc primer paint to beapplied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubberat top end. Padals shall be made up of Nylon alloy withrounded edge of prevent any impact of injury and seat tobe made from virgin LLDPE manufactured by rotationalmoulding with minimum thickness of plastic 4.00mm,colourful and U V resistant environmental friendly.Bearing used shall be maintenance free, duly oiled sealedand self lubricated made by reputed company to beapproved by Engineer-in-Charge. Equipment to be fittedwithin built limiters to prevent unwanted movements. Allopen ends of pipe to be coloured by GI/LLDPE caps foruser safety. The equipment to be fixed on ground withconcrete of minimum strength M25 and J shaped weldedbolts and once the concrete is set, fix the equipment on toit and cover nuts and bolts with the base plate cover, allcomplete as per direction and approval of Engineer-inCharge regarding material, shape of equipment colourson metal, seat and base cover plate and fixing ofequipment etc 4 Abb Trainer/Sit Up Brench:Main Post-114mmPipe Size- 2’’x4’’Thickness pipe- 3mmPipe standard: GPPaint -Powder coating onlyPost caps- Aluminium/LLDPEScrews other- Nylon lock boltMaterial Mild SteelEach 12000.00Holding Capacity 120 kgAge Group 13 yearsplus All joint shell be lubricated made by reputed companyand powder coated using Akzo Nobel or equivalent of80-120 micron thick. All welding joints of pipe are wellwelded with joints scalloped a necessary and dressed offremoving sharp edges and burresto be approved byEngineer-in-Charge. Equipment to be fitted within builtlimiters to prevent unwanted movements. All open endsof pipe to be coloured by GI/LLDPE caps for user safety.The equipment to be fixed on ground with concrete ofminimum strength M25 and J shaped welded bolts andonce the concrete is set, fix the equipment on to it andcover nuts and bolts with the base plate cover, allcomplete as per direction and approval of Engineerin-Charge regarding material, shape of equipment,colour on metal, seat and base cover plate and fixing ofequipment etc. 5 Double cross walker:Pipe- structure made of Apollo Brand B CLASS GI. Pipe OF114 mm OD 42 mm OD And 32 mm ODConnecting Pipe –Made of Apollo Brand B CLASS GI. PipeOF 32 OD.Handle Frame - Made of Apollo Brand B CLASS GI. Pipe OF42 OD.Handle Grip - Made of food Graded RubberBearing – Ball bearing 6205zzBearing Caps - Made up of HDPE Material 62 mmSeats- Made of HR Sheet OF 2 mm Thickness.Pole Caps – Made up of HDPE Material.Flanges – 8 mm ThickPowder Coated (Thickness 90 micron) 6 CYCLE:Pipe- structure made of GI. Pipe (IS1239-2004) OF 4” OD 42OD AND 32 OD OF 3 to 4 mm thicknessArm – structure made of GI pipe 32 OD 4 mm thickness.Bearing – Ball bearingFoot Rest - structure made of M.S. SHEET OF 2 mmThickness.Bearing Caps - Made up of HDPE Material.Seats- structure made of M.S. SHEET OF 3 TO 4 mmThickness.Pole Caps – Made up of HDPE Material.Paint – Powder Coated (Thickness 90 micron) 7 LEG PRESS:Center main pipe114mm. B class(3mm to 3.5mm. thickness)2. Sitting pipe 40mm.B class(3mm to 3.5mm. thickness)3. Both side vertical structure pipe 40mm.4. Seat metallic sheet 3mm to 3.5mm. M.S5. Footrest M.S Checked plate 4mm. thickness6. Permanent lubricated sealed bearing of reputed brand.7. Nuts and Bolts Galvanized.8. Nylon covers for covering the nuts and bolts 8 PARALLEL BAR:Material GIFinish Powder CoatedProduct Area 1828 x 685 x 1524 mmSafe Play Area 2438 x 1220 mmHandle Frame 38 mm OD G.I. pipeEach 7000.00• Parallel Bar made up of 2inch B class GI pipe: Prime Standduly bend, Foundation center pipe.• All welded joint are of good quality.• High tensile steel with galvanized nut and bolts to be used.• The powder coating done with Pure polyester powder with 60to70 micron thickness. 9 PUSH UP BAR:Minimum Order Quantity 1 PieceUsage/Application Only For Outdoor UseMaterial GI, Mild SteelAutomation Grade ManualDimension 3900 X 1450 X 2350 mmMax. User Weight 110 KgPipe Dimension – Main Post 140mm dia and other post40mm dia.All joint shell be lubricated made by reputed company tobe approved by Engineer-in-Charge. Equipment tobefitted within built limiters to prevent unwantedmovements. All open ends of pipe to be coloured byGI/LLDPE caps for user safety. The equipment to befixed on ground with concrete of minimum strength M25and J shaped welded bolts and once the concrete is set,fix the equipment on to it and cover nuts and bolts withthe base plate cover, all complete as per direction andapproval of Engineer-in-Charge regarding material,shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc 10 3.Twister :-Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2`x4` rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zine primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made byreputed company to be approved by Engineer- in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE: caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. 11 Bridge Ladder :-Product type Playing ColourYour choiseSize 10’feetMaterialIron CustomizedYes Age Group8 to 20 Size2.0 X2.0 X mtr/3.0 Mtr.All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved byEngineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GIALLDPE caps for user safely. The equipment to be fixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. 12 5. SEE Saw :- Product type Playing Material Mild steel Size6 Feet Age groupup to 12Seating2 seaterAll Joint shall be lubricated made by reputed company and powder coated using Akzo or equipment of 80-120 micron thick. All welding joints of pipe are well welded with jointed scalloped a necessary and dressed off welded with joints scalloped a necessary and dressed off removing sharp edge and burrsto be approved by Engineer in charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPWE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cove nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer in Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
