Tender For Construction Work Of Mini Meeting Room In Collectorate Campus. - Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. For door/ window/ clerestory window.DSR No 14.4.1 2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and belowDSR No 15.12.1 3 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metresDSR No 15.12.2 4 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mmDSR No 15.23.1 5 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.DSR No 15.57 6 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR No 15.2.1 7 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.DSR No 15.60 8 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead : 320 x 120 cm (outside to outside)DSR No 15.55.3 9 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar DSR No 15.7.4 10 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR No 13.91 11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR No 13.80 12 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of sizeSize of Tile 600 x 1200 mmDSR No 11.41A.2.2 13 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR No. 8.31) DSR No 8.31 14 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)DSR No 13.46.1 15 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)DSR No 13.4.1 16 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)DSR No 6.4.1 17 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsDSR No 9.21.1 18 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal woodDSR No 9.1.2 19 5 mm thick solid foam PVC panel of required size with moulded/ extrudedbeading of appropriate design shape and size as per manufacturer’sspecifications ( to secure the panel insert tight in place within the styleand rails of shutter) matching the colour and shade of shutter frame. Non decorative type. DSR No 9.124.1 20 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type)DSR No 9.47.2 21 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mmDSR No 9.74.1 22 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.DSR No 9.88 23 Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mmDSR No 9.92.1 24 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan orEuropean type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hingesand rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flushbend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling ofapproved municipal design complete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever requiredWhite vitreous china dual purpose WC pan with white solid plastic seat and lid with whitevitreous china flushing cistern and C.P. flush bend.DSR No17.68.1 25 Providing and fixing white vitreous china flat back or wall corner type lipped front urinalbasin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushingcistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clampscomplete, including painting of fittings and brackets, cutting and making good the walls andfloors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern DSR 17.4.1 26 White Vitreous China Wash basin size 550x400 mm with a 15 mm CPBrass single hole basin mixer DSR NO 17.7.11 A 27 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabilityfor hot & cold water supply, including all CPVC plain & brass threaded fittings and fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm Noninal Dia pipe DSR No 18.8.1 28 As in item above but for 20 mm Noninal Dia pipe DSR No 18.8.1 29 As in item above but for25 mm Noninal Dia pipe DSR No 18.8.2 30 As in item above but for 32 mm Noninal Dia pipe DSR No 18.8.3 31 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in Charge. External workPN - 10 Pipe, 110 mm OD (SDR-11)DSR No 18.6.9 32 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore DSR No 18.15.1 33 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore DSR No 18.15.2 34 Rectangular shape 1500x450 mm Mirror with Plastic moulded frame DSR No 7115 35 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms DSR No 17.73.1 36 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) DSR No 4.1.4 37 Supply and Fixing Highback EXECUTIVE CHAIR (Geeken/Featherlite/Neeman or Eq.) 38 Supply and Fixing Lowback EXECUTIVE CHAIR (Geeken/Featherlite/Neeman or Eq.) 39 Supply and Fixing General CHAIR (Geeken/Featherlite/Neeman or Eq.) 40 Supply and Fixing TABLE (Geeken/Featherlite/Neeman or Eq.) 41 Supply and Fixing SOUND SYSTEM (SPEAKER&MIC) 42 Supply and Fixing Ultra HD SmartTV (65 INCH) 43 Supply and FixingAC (1.5 TON ) 44 Supply and FixingLOGO 45 Supply and Fixing Cabinet 46 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.: Group A DSR NO.1.10.1 47 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR NO.1.12 48 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR NO.1.14.2 49 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.: single pole DSR NO.2.10.1 50 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR NO.2.13.2 51 LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS :10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin),SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminum Body including trim : 12-15 watt DSR NO. 1.1.3(E&M Vol. II-2025) 52 As in Item above but for 30 watt DSR NO. 1.1.6(E&M Vol. II-2025)
