Tender For Special Repair To Bldg No P-516 At Transit Camp Under Ge 865 Ews; 1 Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thick (below or above ground level) and removing debris off the premises complete all as specified and as directed by Engr-in-Charge. 2 Demolition of precast concrete block walling, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and/or as directed by Engr-in-Charge. 3 Taking down cement plaster on brick/PCC block or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and/or as directed by Engr-in-Charge. 4 M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and/or as directed by Engr-in-Charge. 5 M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and/or as directed by Engr-in-Charge. 6 M&L for 5mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and/or as directed by Engr-in-Charge. 7 M&L for three coats of white wash on newly plastered surfaces of ceiling inclpreparation complete all as specified and as directed. 8 M&L for preparation of new plastered wallsurface of any description and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and as directed. 9 M&L preparing newly plastered wall surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint. 10 Taking down chowkat or frame with shutters (without taking of shutters from the frame)not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and/or as directed by Engr-in-Charge. 11 Taking down chowkat or frame with shutters (without taking of shutters from the frame)exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and/or as directed by Engr-in-Charge. 12 M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated, including backing with thermocol sheets or as specified by manufacturer including dismantling complete all as specified and/or as directed by Engr-in-Charge. 13 M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & liningfixed with nails exc 13 sqcm and not exc 25 sqcm in section including dismantling, complete all as specified and/or as directed by the Engr-in-Charge. 14 M&L for 2nd class soft wood clean sawn as in beading for edges of ceiling, lining or wooden flooring work fixed with nails exc 6 sqcm and not exc 13 sqcm in sectionincluding dismantling complete all as specified and/or as directed by the Engr-in-Charge. 15 M&L for9mm thick prelaminated particle boardmedium interior grade, prelaminated oneside with decorated choice lamination & other side balancing whitelamination fixed with screws to timber frame work as in wall panelling, shelves/boardingincluding dismantling complete all as specified and as directed. 16 All as per serial item no. 15 above, but as in ceiling. 17 M&L non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. 18 M&L for glazed (coloured) ceramic tiles of size (350 x 250mm) x7 mm / (450mm x 350mm) x 7mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc. to matchwith the shade of tiles including rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles all as specified and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 19 Demolition of stone slabs and tiles of any description or thickness in floors aprons etc. laid bedded and pointed in any mortar. 20 M&L for machine cut Kota stone slab flooring 20-25 mm thick over & including cementscreed bed 20mm thick in CM 1:6, set and jointed in neat cement slurrylaid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed. 21 M&L for precast solid blocks in cement concrete 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in block masonry, exc. 10cm in width and set in cement mortar 1:6, complete all as specified and/or as directed by Engr-in-Charge. 22 M&L forchequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments and laid over & including 20mm thick cement screed base (1:6) complete all as specified and/or as directed by the Engr-in-Charge. 23 M&L for 75 mm PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement, complete all as specified and/or as directed by the Engr-in-Charge. 24 M&L for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade A in plinth protection, complete all as specified and/or as directed by the Engr-in-Charge. 25 S&F mild steel work as in hold fastsand similar work confirming to Fe-290 or Gd -E 165 complete all as specified and/or as directed by the Engr-in-Charge. 26 M&L for PCC 1:3:6, type C1, (using 20 mm graded stone aggregate) as in hold fast, bed block and like of any description complete all as specified and/or as directed by the Engr-in-Charge. 27 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling& fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge. 28 S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge. 29 S&F for 30 mm thick2nd class softwood plain framed panelled shutters (any number ofpanels) with panels of timber flat on both sides (feather edged), or ofveneered particle board medium density, wood particle board with commercial face veneers, supply and fixed to chowkats, complete all as specified and/or as directed by Engr-in-Charge. 30 S&Fpowder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and/or as directed by the Engr-in-Charge. 31 S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, including aluminium jali fixed in one side, side hung type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long(1 No) hinges type B-21 100mm long (3 Nos) suitable handle (1 No) etc. complete all as specified and/or as directed by the Engr-in-Charge. 32 S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. 33 M&L sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane complete all as specified and as directed. 34 S&F 150mm long aluminium anodized, barrel tower bolt of extruded sectioncomplete all as specified and/or as directed by the Engr-in-Charge. 35 S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and/or as directed by the Engr-in-Charge. 36 S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and/or as directed by the Engr-in-Charge. 37 S&F floor door stopper (length of cover plate) 150mm long aluminium alloy body and tongue anodised with hard drawn steel springfixed in floorcompleteall as specified and as directed. 38 S&F 100mm long aluminium anodized, butt hinges of extruded sectioncompleteall as specified and as directed. 39 S&F in repair250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed 40 S&F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindrical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and taking down the existing ones, complete all as specified and directed by Engr-in-Charge 41 S&F in repairs 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule . 42 S&F in repairs 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR. 43 S&F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule. 44 Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store. complete all as specified. 45 S&F 25 mm dia3 layer PP-R polypropylene random copolymer concealedpipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and directed by Engr-in-Charge 46 All as per serial item no 45 above,but 32 mm bore pipe. 47 S&F in repairs vitreous China squatting pan or Orissa pattern580 x 440 mm white with integral foot rest (excluding cistern)with front or back inlet ant pattern as in repairs incl bedding with PCC 1:2:4, type B-I, (using 20 mm graded crushed stone aggregate), complete all as specified and/or as directed by the Engr-in-Charge. 48 Supply only 10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and/or as directed by Engr-in-Charge. 49 S&F PVC (SWR) S’ trap of 110 mm bore. 50 M&L for PVC (SWR) pipe single socketed, 110mm soil, waste and rain water drainage pipes fixed to wall and jointed all as specified . 51 S/F 110 mm dia (SWR) bend any radius complete all as specified and/or as directed by the Engr-in-Charge. 52 PVC (SWR) vent cowl of 110mm bore. 53 M&L for Cast iron Nahani trap 75mmwith grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), complete all as specified and/or as directed by Engr-in-Charge. 54 S&F PVC connections 15 mm size with PTMT nuts (length 600mm). 55 S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and/or as directed by the Engr-in-Charge. 56 S&F in repair 1200mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and/or as directed by the Engr-in-Charge. 57 M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge. 58 S&F Vitreous China wash basin white flat back size 550 x 400 mm including including CI brackets embedded in PCC block with PCC 1:2:4 type B-1 & CP grating with holes fixed in repairs complete all as specified and directed by Engr-in-Charge. 59 S&F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible waste pipe for sinks / wash hand basins. 60 S&F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams). 61 M&L for preparation of old plastered ceiling surface of any description and applying two coats of white wash complete all as specified and as directed by Engr-in-Charge. 62 M & L for complete removing of existing treatment on old wall surfaces and applying two coats of distemper oil emulsion complete all as specified and/or as directed by Engr-in-Charge. 63 M&L for preparation of old plastered surface and apply two coats of cement base paint complete all as specified and directed by Engr-in-Charge 64 S&F in repair19mm dia mild steel, chromium plated curtain rods,withbrackets, end bulbs all as specified and as directed by Engr-in-charge. 65 S&F in repairs Soap dish Chromium plated. 66 S&F in repairs Towel rail 600mm long Chromium plated (Minimum weight 190 gms). 67 Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) including complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed. 68 Point wiring complete with 1.5 Sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts FRLS cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor FRLS cable as continuous earth leadall as specified and directed for the followings:- 69 One light/exhaust fan point controlled by one way switch. 70 One lightpoint controlled by twoway switch. 71 One switch socket outlet 6 Amps, 230 volts point on same board. 72 One switch socket outlet 6 Amps, 230 volts point on independent board. 73 All as serial item No 69 above, but using cables 4 Sq mm size. 74 Supply and fix switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed. 75 Supply and fix switch piano flush button single pole 06 Amps 230 volts two way complete all as specified and directed. 76 Supply and fix socket outlet two in one5 pin 6 Amps flush type.230 volts complete all as specified and directed. 77 Supply and fix switch Socketcombination outlet two in one5 pin 6 Amps flush type.230 volts complete all as specified and directed. 78 Supply and fix switch Socket combination outlet multi purpose 5 pin 6 Amps and 16 Amps 230 volts complete all specified and directed. 79 Supply and fix ceiling rose, surface Bakelite three terminals complete all as directed. 80 Supply and fix in replacement of sheet metal enclosure for DBs double door when MCBs to be used single pole & neutral 240 Volts 12Way completeall as specified and directed. 81 Supply and fix in replacement of sheet metal enclosure for DBs double door when MCBs to be used single pole & neutral 240 Volts 08Way complete all as specified and directed. 82 Supply and fix MCB SPN 63 Amp 240 Volts, 50 Hz AC, C seriescompleteall as specified and directed. 83 Supply and fix MCB SP 6-32 Amps. 240 Volts50 Hz AC, C series completeall as specified and directed. 84 M&L for submain wiring along with earth wire FRLSH insulated copper conductor, single core cable in surface/recessed as required in & including PVC casing caping wire size 2x10.0 sq. mm + 1x10.0 sq. mm earth wire, including taking down, complete all as specified and directed. 85 S&F in replacement 4 x 1 (feet) LEDlight fitting 32 Watt, 220 V, AC surface mountedbox type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 86 S&F LED light fitting 1x9W/1X10Wbulkheadluminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 87 S&F in replacement 4 Way double door Tripple Pole Neutral vertical load line Distribution Board suitable for flush mounting and surface mounting with 250 A copper bus bar with neutral bars and earth bars with including MCCB 160 TPN as incomer and SP/TP MCBs as out going and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. 88 M&L for Earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and including 4 mm dia GI wire as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 3 of MES SSR Part I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS frame and cover 6 mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed. 89 Supply, install, testing complete water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 Litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc. including taking down old unserviceable geysers, complete all as directed. Note :- Old geyser retrieved from site should be deposited to MES store. 90 Supply and fix in of exhaust fan any type and size with Plastic body 300 mm sweep including taking down the existing unserviceableexhaust fan and making necessary arrangements for fixing of plastic body 300 mm sweep and confectioning with flexible three core cable from the ceiling rose complete all as directed. Note :- Old UNSV fans retrieved from site should be deposited with MES store. 91 Supply and fix LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completeall as directed. 92 Material and labour for removing all existing connection like inlet/outlet pipe, bracket, gate valves, connection line from FCU keeping it in safe custody and refixing the same post completion of all works complete all as specified and directed.
