Tender For Construction Of Pds Centre At Raja Colony In Ward No.54; 1 Earth work excavation for foundation in ordinary soil with initial lead and lift etc., complete 2 Open Excavation 3 Narrow Excavation 4 Supplying and filling with M sand in layers of 15cm thick including watering and ramming to consolidation etc complete 5 Plain Cement Concrete 1:4:8 mix using 40mm ISS gauge HBBG metal for foundation etc., complete 6 Providing steel centering and shuttering with necessary strutting arrangements for sides and soffits of all RCC works etc complete 7 Without strutting 8 For Column & sunshade 9 With strutting 10 Supplying cutting bending and fixing in position of RTS/MS grills including cost of steel and binding wire etc., complete 11 Reinforced Cement Concrete 1: 1.5 : 3 mix using 20mm ISS gauge HBBG metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labourcharges etc., complete as per standard specification 12 Foundation & Basement 13 Above GL Upto 4.5m 14 Brick Work in Cement Mortar 1:5 mix using country bricks of size 8¾ x 4¼ x 2¾foundation etc., complete. 15 Foundation & Basement 16 For Super structure 17 Special Ceiling Plastering for RCC slabs and beams with cement mortar 1:3 mix 10mm thick including hacking etc., complete 18 Plastering in Cement Mortar 1:5 mix 12mm thick etc., complete 19 Stucco Plastering in Cement Mortar 1:5 mix 12mm thick etc., complete 20 Weathering course with concrete broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaten with wooden beaters giving to required slope and thicknessetc., complete 21 Finishing the top with one coarse of pressed tiles of size 20cm x 20cm x 20cm thick laid in C.M 1:3 mix with water proofing compound as per Indian std specification 2% weight of cement and pointing with same mortar etc ., complete. 22 SupplyingandErectingPullandPushTypeRolling Shutter withISI make of approved size and section using 18 GI sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc. Gear Operated Rolling shutter 23 Solid PVC Door Shutters using 19 Gauge19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails.The steel tubesshallbecoveredwith5mmthicksolidPVC Sheets.Shutter using 5mm thick solid PVC Sheets for panellingshallrigidlyfixedinpositionincluding necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail,lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter (WITH FRAME) 24 Manufacturing,supplying & fixing in position Steel windows of MS sheet 20 gauge thick with openable shutter frame and shutter frame made out of steel section confirming to IS 7452/ 1990.The outer frames of windows made ofZ section (F7D) of size 25 x 20 x 3 mm confirming to IS7452/1992 mullions are made of (F4B) of section size 46x25x3mm confirming to IS7452/1990.The shutters are individual and each of them can be operated separately. Sash bars are made of Tsection (T2) of size 25x22x3m, 2nos of sturdy hinges and one numbers of handle cum slatch of special type are fixedfor with openable shutter. Suitable opening is left for its any operation. One number of adjustable stay with locking bracketof sufficient length shall be provided for each shutter 4 nos. of 40x40x3mm anngle hold fast 230mm length are welded to the outer frame at appropriate point.M.S square bars of 12mm size is welded to the inner face of the window at equal intervals not excluding 10cm spacings ,20gauge MS sheet is used for covering the shutter. Grill members are painted with one coat of primer. Also rate is inclusive of costof all materials, labour etc.complete. 25 Fabrication, Supply and fixing in position ofN type ventilators using M.S. angle of size 25x25x5 mm for frame and M.S. flat of size 20x3 mm for fixing the weld mesh and using 25X 22X 3 MM T section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fixing the weldmesh 25mm square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary clips & putties with required bolts,nuts and washers and one coat of red oxide primer etc., including necessary dismantling,making holes in RCC columns, beams,masonry wherever necessary with power drill to the extent required and made good to the original conditions after fising as directed by the departmental officers. 26 Flooring with Stain free Nano polish Vetrified flooring tiles of size 600 x 600 x 8mm of approved colour and quality of required size laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortar complete and finish very neatly etc complete 27 Flooring with Cement based Hydraulically pressed Anti skid tiles (pattern design) - 20mm thick of approved colour and quality in cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly 28 Flooring with ceramic tiles white color ceramic tiles of size 305 x 305 x 6mm with self bath way special color tiles in cement mortar 1:3 mix 10mm thick and pointing with white cement using at the rate of 0.45 kg/cm2 including finishing the joint neatly pointing flush with tiles surface etc., complete 29 Dadooing and skirting the walls with white or colour glazed tiles of size 20 cm x 20 cm x 6mm laid in cement mortar 1:2 mix 10mm thick and pointing with white cement using 0.40 Kg/m2incluidng finishing the joint and pointing flush with tiles surface etc., complete 30 Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete1:4:8 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers etc.complete. 31 Supply and fixing in position of cuddapah slabs of 40mm thick size with machine cut edge and polishing all sidesexcept bottom one line dressing etc., complete 32 Provision for Geological Investigation charge for suitable point of borewell including cost of transporting of geological survey instruments including all labour charges etc., complete 33 Drilling 6 vertical bore in hard rock area to any required depth as dilled by the board officers including labour charges for inserting casing pipes assembly in the directed hole including welding the joints if necessary groutting the casing pipes etc., and including transporting from one place to another etc., complete 34 Supply of 200 mm dia casing pipe etc., complete 35 Supply of Single phase submersible pumpset asper is 8034 without panel bord 1 H.P motor ofetc., complete (15lpmx100m) 36 Supply ofSingle phase panel board with two level guard and auto start 1 H.P etc., complete 37 Supply of 3 core 1.50sq.mm flat type copper cable conforming to IS 694/1990 etc., complete. 38 Supply and laying of following UPVC Pipes and Specials with ISI mark etc complete 39 32mm dia UPVC Pipe (Sch 80) 40 25mm dia UPVC Pipe (Sch 80) 41 32mm dia UPVC Elbow 42 32mm dia UPVC Tee 43 32mm dia UPVC Union 44 32mm dia UPVC Coupler 45 25mm dia UPVC Elbow 46 25mm dia UPVC Tee 47 25mm dia UPVC Coupling 48 160mm Dia End Cap 49 UPVC Adhesive 50 Nylon rope for Bore well 51 PVC Tank 52 PVC Screw down Tap 53 Labour charges for the Erection of Sumbersible Pump set in Bore well / Open well including fixing and jointing submersible cable with properclamp upto the starter to required depth andalso fixingriser pipes to the require depth valve erection clamp, pressure guage upto the exterior wall of pump room and erection of panel board consisting of TPICN switches, starter, voltmeter, ammeter, three pilot (indicating) lampcapacitor single phasing preventor, water level guard and laying adn jointing the cables adn twin earthing as per IE rule etc., complete and testingthe pumpset and trail run as directed by departmental officer; etc complete 54 Supply of following PVC Pipes and specials with I.S.I marketc., complete. 55 75mm dia PVC Pipe 6Ksc 56 90mm dia PVC Pipe 6Ksc 57 110mm dia PVC Pipe 6Ksc 58 75mm dia PVC Tee 6Ksc 59 90mm dia PVC Tee 6Ksc 60 110mm dia PVC Tee 6Ksc 61 75mm dia PVC Bend 6Ksc 62 90mm dia PVC Bend 6Ksc 63 110mm dia PVC Bend 6Ksc 64 PVC Adhecive 65 Laying and jointing of PVC pipe and specials to proper grade and alignment jointing with PVC coupler with cement paste and testing to the required pressure including conveyance of water for filling during testing excluding cost of materialsetc.,complete as per Std.specification 66 75mm dia 6Ksc PVC Pipe 67 90mm dia 6Ksc PVC Pipe 68 110mm dia 6Ksc PVC Pipe 69 Supplying and fixing of TNEB meter board suitble for single phase 32A service connection made up of suitable angle iron frame work of size 2feet x 1½feet using angle iron size 1½ x 1½ x ¼ rigidle fixed on wall covered with hylem sheet of size 2feet x ½ feet of 6mm thickness with necessary bolts and nuts supports and supply and fixng of 3 Nos 32 A fuse unit (500v) 1 No neutral link copper earth flat of size 1 x ¼ with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection etc., complete as directed by the departmental officers etc., complete.(SD 125) 70 Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for concealed PVC light / fan point (for elctronic regulator) SD-24. 71 Wiring with 2x1.5 sqmm (22/0.3) PVC insul unshe sc cu con of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with TW switch box and 5 A FT switch and making good concealed portion with suitable colour etc complete for Open light point (SD17) 72 Wiring with 2X 1.5 sqmm (22/0.3) PVC insulated Sc unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5A 3 pin non inter locking CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point ( SD-38) 73 Wiring with 2x1.5 sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box inflush with wall, with 3mm thick hylum sheet cover for 15A 3 pin non inter locking flush type CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable color for concealed power plug point (SD-40) 74 Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathes Cu. Conductor of 1100 V on 7/20 GI bearer wire for service connection mains SD 71 75 Supply and fixing of single box type 440W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceilig with flu tube with PVC unsheather copper leads from terminals SD(88) 76 Supply&fixingof1200mm ACceilingfancompletesetwithstepedelectronicregulatorwithexistingclamp SD no: 107. 77 White washing two coats using best shell lime including cost of materials and labours charges etc., complete. 78 Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required - 1 m2 79 Painting two coats for New iron works using best synthetic enamel paint of approved colour and high quality etc., complete. 80 Supply and fixing of vinyle name board of size 2.40x0.90 m size with corporation embalomin Tamil as directed by the departmental officers including framed with 50x25mm country wood reepers outer finished with 1”x1” Aluminium beeding with all material and labour cost for fixing etc., complete
