Annual Repair And Maintenance Of Gpra, Motinagar Shillong (Sh: Maintenance Works Of Civil, During 2025-26, Shillong-Meghalaya

annual repair and maintenance of Gpra, Motinagar Shillong (Sh: Maintenance Works Of Civil, During 2025-26---Correction. Nil Deletion. Nil Insertion. Nil Overwriting. 1 Earth work 1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 1.1.1 All kinds of soil 1.1.1.1 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 2 Concrete Work 2.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 2.1.1 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 2.1.2 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 3 Masonary Work 3.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 3.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) 3.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 3.2.1 Cement mortar 1:4 (1 cement :4 coarse sand) 4 Sub-Head : Wood and P.V.C. Work 4.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters Correction. Nil Deletion. Nil Insertion. Nil Overwriting. 4.1.1 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 4.2 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 4.2.1 250x16 mm 4.3 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 4.3.1 200x10 mm 4.3.2 150x10 mm 4.4 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 4.4.1 100 mm 4.4.2 75 mm 4.5 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 4.5.1 Twin rubber stopper 5 Sub-Head : Flooring 5.1 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

Refer document

INR 86209.0 /-

INR 43.10 Lakhs /-