Renovation And Modification Of Annexe 1A Inside Factory Area.-1 Carriage of material up to 1 km lead by Mechanical transport including, loading, unloading & stacking - 1.1.1 a) Lime, Moorum, Building rubbish 1.1.2 b) Earth - 1 Km lead 2 Earth work in surface excavation not exceeding 30 cm in depth butexceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:: 2.1.1 All kinds of soil. 3 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kind of soil 4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .(Excluding the cost of Cement which shall be supplied free of cost by BHEL) 4.1.3 a) 1:2:4 (1 cement : 2 coarse sand (zone-III) : graded stone aggregate 20 mm nominal size) 4.1.5 (b) 1:3:6 (1 Cement : 3 coarse sand (zone-III) : graded stone aggregate 20 mm nominal size) 6 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :.(Excluding the cost of Cement which shall be supplied free of cost by BHEL) 5.1.2 a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): graded stone aggregate 20 mm nominal size) 7 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :.(Excluding the cost of Cement which shall be supplied free of cost by BHEL) 5.2.2 a) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : graded stone aggregate 20 mm nominal size) 8 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)..(Excluding the cost of Cement which shall be supplied free of cost by BHEL) 9 Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.1 a) Foundations, footings, bases of columns, etc. for mass concrete 5.9.2 b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 10 Ana. 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level (Reinforcement bars will be supplied free of cost from BHEL store). Thermo-Mechanically Treated bars of grade Fe-500D or more 11 ** Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : (Excluding the cost of cement which shall be supplied free of cost by BHEL):- 6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) 12 ** Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(Excluding the cost of cement which shall be supplied free of cost by BHEL):- Granite of any colour and shade 8.2.2.2 Area of slab over 0.50 sqm 13 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete..(excluding cost of cement which shall be supplied free of cost by BHEL) (Make of Vitrified Tile shall be Nitco/Kajaria) 14 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (Make of Door Closer shall be Godrej/Kelvyn/Hardwyn ) 15 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws, etc., complete. 9.96.1 300x16 mm 16 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 9.97.4 :150x10 mm. 17 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 9.100.1 :125 mm 18 Providing and fixing aluminium hanging floor door stopper, ISImarked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 9.101.2 Twin rubber stopper. 19 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm both directions with wire of dia. 0.50 mm all complete. 9.135.2 With 12 mm mild steel/ aluminium U beading 20 Ana. 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(Structural steel will be issued free of cost from BHEL stores). 13285.00 21 ** Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Excluding the cost of cement which shall be supplied free of cost by BHEL):-(Make of Vitrified Tile shall be Nitco/Kajaria Double charged) 11.41.3 Size of Tile 800x800 mm 22 11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. (Excluding the cost of cement which shall be supplied free of cost by BHEL):- 23 11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 24 ** Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (Excluding the cost of cement which shall be supplied free of cost by BHEL):- ( Make-Nitco/ Kajariya/ Double charged) 11.46.3 Size of Tile 800x800 mm 25 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in charge. 11.48.3 Size of Tile 800x800 mm etc
