Annual Repair Maintenance Of To Residential And Non Residential Buildings Under Division No Iii At Hp Sectt. Shimla.( Sub Head - C/O Parking Shed At Divisional Commission Office At Chotta Shimla.), shimla-Himachal Pradesh

Annual Repair Maintenance of To Residential And Non Residential Buildings Under Division No Iii At Hp Sectt. Shimla.( Sub Head - C/O Parking Shed At Divisional Commission Office At Chotta Shimla.) A/R And M/O To Residential And Non Residential Buildings Under Division No Iii At Hp Sectt. Shimla.( Sub Head - C/O Parking Shed At Divisional Commission Office At Chotta Shimla.) , Excavation In Earth Work Etc., In All Kinds Of Soils Including Spade Work, Saturated Soil,Pick Work, Jumper Work, Blasting & Chiselling / Wedging Out Rock Etc.And Pumping Or Bailing Out Water Including Dressing Of Side And Beds And Stacking Of Serviceable Materials And Disposal Of Surplus Earth In All Leads And Disposed Earth To The Levelled And Neatly Dressed Including Carriage Of Materials All Lead And Lifte As Per Direction Of Engineer-In-Charg As Directed By Engineer-In-Charge. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. 1:2:4 (1 Cement : 2 Coarse Sand) : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Providing And Fixing 8Mm Thick Chequred Plate Complete Including Carriage Of Meterials In All Leads And Lifts. , Providing And Fixing Precoated Galvanised Iron Profile Sheets Of Tata Or Equivelent(Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.60 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.

INR 500 /-

INR 21681.0 /-

INR 10.84 Lakhs /-