Tender For Periodical Services To Certain Md. And Otm Accn. At Smq Area At Af Stn Digaru., digaru-Assam

Tender For Periodical Services To Certain Md. And Otm Accn. At Smq Area At Af Stn Digaru.; 1 M & L preparing old decorated surfaces, plastered or unplastered and applying one coat of white wash on walls of buildings complete all as specified & directed. 2 All as per item Sl. No. 1.00 above but two coat of white (lime) wash as required basis complete all as specified & directed. 3 All as per item Sl. No. 1.00 above but on ceiling. 4 Taking down cementplaster any description on brick or stone walls etc. including rakingout joints, hacking for key, scrubbing down with water etc. complete all as specified & directed. 5 M & L rendering 10 mm thick in cement mortar 1:4 on chajjas/lintel etc and finished even and fair without using extra cement in patches complete all as specified & directed. 6 M & L rendering 15 mm thick in CM 1:6 inon surface of walls and finished even and fair (without using extra cement) in patches complete all as specified & directed. 7 M & L rendering 5 mm thick in CM 1:3 inon surface of ceiling and finished even and fair (without using extra cement) complete all as specified & directed. 8 M & L preparation of new plastered surfaces of walls/chajja/lintel and applying three coats of white wash complete all as specified & directed. 9 M & L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted overa coat of primer complete all as specified & directed 10 M & L preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed. 11 M & L preparation of old decorated surfaces, washing, rubbingdown, stopping and applying one coat of cement base painton walls, etcwhite or tinted complete all as specified & directed. 12 M & L for complete removal of existing surface and applying two coat of cement base painton walls, etcwhite or tintedcomplete all as specified & directed. 13 M & L preparation of old decorated surfaces and applying one coat of oil bound distemper on walls, white or tinted complete all as specified & directed. 14 All as per item Sl. No. 13.00 above but on ceiling. 15 Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete all as specified & directed. 16 M&L for preparation of old wall surfaces and applying onecoat ofAcrylic Smooth exterior paint of required shadecomplete all as per manufacturer instruction & directed. 17 M&L for complete removal of existing treatment and applying two coat ofAcrylic Smooth exterior paint of required shade complete all as per manufacturer instruction & directed. 18 M & L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth andapplying one coat of synthetic enamel paint (ordinary tint), any colour complete all as specified & directed. 19 All as per item No 18 but wooden surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint complete all as specified & directed. 20 M & L preparation of old painted surfaces of steel work of any description, not otherwise described, over 10 CM width or girth and applying one coat of synthetic enamel paint, any colour complete all as specified & directed. 21 All as per item No 20 but steel surfaces of any description n.exc 10 cm width or girth when unconnected with other painting orwhen painted in different tint complete all as specified & directed. 22 M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of scaled paint where ever required and applying two coats of synthetic enamel paint complete all as specified & directed. 23 M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of scaled paint and applying two coats of synthetic enamel paint for change of existing colour complete all as specified & directed. 24 M&L obliterating old writing of any description n exc 0.10 Sqm with synthetic enamel paint to match existing work and rewriting existing letter complete all as specified & directed. 25 Taking down existing wall finishes, any type by vigorously wire brushing, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in CM 1:3 & applying 02 coats wall care puttyon the surface with uniform thickness& making surface absolutely smooth& applying two coats of distemper oil emulsion white or tinted complete all as specified & directed. 26 M & L preparation of old decorated surfaces and applying one coat of plastic emulsion paint on walls, white or tinted complete all as specified & directed. 27 Taking down existing wall finishes, any type by vigorously wire brushing, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in CM 1:3 & applying 02 coats wall care puttyon the surface with uniform thickness& making surface absolutely smooth & applying two coats of plastic emulsion paint white or tinted over a coat of primer complete all as specified & directed. 28 M&L for preparation of old floor/hardstanding/pavers block/ chequered tile surface and applying one coat of floor paint after Wash surface with a hose to remove loose dust and scrub with wire brush to remove algae/fungus and moss growth. 29 M&L for preparation of old floor/hardstanding/pavers block/ chequered tile surface and applying two coat of floor paint over a self priming coat as per folllowing working specification :- (a) Wash surface with a hose to remove loose dust and scrub with wire brush to remove algae/fungus and moss growth. (b) After diluting the emulsion with 30 to 40% water, applying a self priming coat. (c) Wait for 6 to 7 hours, then add two coats offloor coat emulsion after thinning with water to obtain brushable consistency.

INR 500 /-

Refer document