|
| 1 | Item No. 1:- Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 2 | For FF + add 1% |
| 3 | For SF + add 2% |
| 4 | Item No.2:- Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc. |
| 5 | SSR I - 46.11 +10% Hilly Area +1% for FF |
| 6 | Item No.3:- Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. |
| 7 | Rate as per SE Paripatrak Item no.6 + 10% Hilly Area +1% for FF |
| 8 | Rate as per SE Paripatrak Item no.6 + 10% Hilly Area +2% for SF |
| 9 | Item No.4:-Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed design sand drawing or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) |
| 10 | SSR I - 25.31 +10% Hilly Area +1% for FF |
| 11 | SSR I - 25.31 +10% Hilly Area +2% for SF |
| 12 | Item No.5:-Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete .(Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)etc.complete.With fine aggregate (Crushed sand VSI Grade) |
| 13 | SSR I - 25.50 +10% Hilly Area +1% for FF |
| 14 | SSR I - 25.50 +10% Hilly Area +2% for FF |
| 15 | Item No. 6:- Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 16 | SSR I - 33.20 +10% Hilly Area+1% for FF |
| 17 | SSR I - 33.20 +10% Hilly Area+2% for SF |
| 18 | Item No. 7:- Providing and fixing solid core flush door shutter in double leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. SSR I - 39.95 +10% Hilly Area +1% for FF |
| 19 | Item No.8:- Providing and fixing in position (as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90mm at weight 0.637Kilogram/ One Running Metre. with window frame bottom track section 92x31.75x1.30mm at weight 1.070Kilogram/One Running Metre Top and side track section 92x31.75x1.30mm at weight 0.933Kilogram/Running metre. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417Kilogram/One Running Metre. Interlocking section 40x18x1.10mm at weight 0.469Kilogram/Running metre. and handle and top section 40x18x1.25mm at weight 0.417Kilogram/Running metre. As per detailed drawing s and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box |
| 20 | SSR I - 39.44+10% Hilly Area+1% for FF |
| 21 | SSR I - 39.44+10% Hilly Area+2% for SF |
| 22 | Item No.9:- Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 23 | SSR I - 40.02+10% Hilly Area +1% for FF |
| 24 | SSR I - 40.02+10% Hilly Area +2% for SF |
| 25 | Item No.10:- Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50metres or spreading in the compound and cleaning the site etc. complete. |
| 26 | SSR I - 32.33+10% Hilly Area +1% for FF |
| 27 | SSR I - 32.33+10% Hilly Area +2% for SF |
| 28 | Item No 11:- Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR I - 26.33+10% Hilly Area +1% for FF |
| 29 | Item No.12:- Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/ using cement with waterproofing compound curing, formwork etc. complete. SSR I - 31.01+10% Hilly Area |
| 30 | Item No.13:- Providing waterproof plaster 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete. (As directed by Engineer in Charge) SSR I - 31.06+10% Hilly Area |
| 31 | Item No 14:- Providing & laying in situ cement concrete of M10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary formwork compacting and curing etc. complete. with reversible Drum Type mixer with SCADA. With crushed sand . S.S.R. P/I….../ 11.03 + Add 10% for Hilly Area +1% for FF |
| 32 | Item No.15:- Providing internal cement plaster 12 mm thick in a single coat, in cement mortar 1:4 with neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing complete. |
| 33 | SSR I - 32.04+10% Hilly Area +1% for FF |
| 34 | SSR I - 32.04+10% Hilly Area +2% for SF |
| 35 | Item No 16:- Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc.complete as directed. |
| 36 | P / I36.19 + 10% for Hilly Area +1% for FF |
| 37 | P / I36.19 + 10% for Hilly Area +2% for SF |
| 38 | Item No. 17:-Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. SSR I - 32.34+10% Hilly Area+1% for FF |
| 39 | Item No 18:- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (including the primer coat.) etc. complete. |
| 40 | P/I 36.11 +35.26 + 10% for Hilly Area+1% for FF |
| 41 | P/I 36.11 +35.26 + 10% for Hilly Area+2% for SF |
| 42 | Item No.19:-Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: ForItem One Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 43 | P / I35.15 +10% for hilly area+1% for FF |
| 44 | P / I35.15 +10% for hilly area+2% for SF |
| 45 | Item No.20:- Providingandfixingframeworkofanodisedaluminiumsectionsforsuspendedfalse ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 Kilogram/m. at 60 cms c/c andfixed with( 15 x 15 mm) flanges weighing 0.119Kilogram/m suspended on6 mm dia.mildsteelrodweighing0.22Kilogram/mfixedonwallandbeamsincluding rounding of the edges with aluminium T of 50 mm x 40 mm weighing 0.39 Kilogram/m etc. including all labour etc. complete. SSR I - 38.14 +10% Hilly Area+1% for FF |
| 46 | Item No.21:- Providingandfixingfalseceilingof10to12mmthickdecorativeboardsoffibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices,coves,domes, cups as per detailed drawings and three coats of spray painting to boards etc.complete.(excludingframework,runnersandmildsteel suspenders). SSR I - 38.17 +10% Hilly Area+1% for FF |
| 47 | Item No.22:- Providing&Fixinginposition, Partitionmadefrom12mmthickGypsumfromboth sides on 50 x 50 mm Sal-wood frame of 600 x 600 c to c, havingof 800 gsm synthetic wool 50 mm thick in between, including cost of required Cut-Outs & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc completeSSR I - 51.12 +10% Hilly Area+1% for FF |
| 48 | Item No.23:- CHANNELLED WALL PANELLING OF SIZE: 192X2400X15MM Providing and FixingChannelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut,InteriorWhite,AluminaPearl)andamelamine balancing layeronthe reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or 21mmofvisiblepane(G-13/G-21).Theedgesofthepanelshallbe“tongue-and- grooved”tofixspecialclipsforinstallationandseamlessvisual.Thebackofthe perforatedpanel shall have soundabsorbing non-wovenSoundtexacoustical fleece hot pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13. (Average value of Absorption Co-efficientreadingstakenat250Hz,500Hz,1000Hzand2000Hz)asperASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm andbowless than1mm/300mOne MetricTonnehe panelsshallbe mountedonspecial aluminium splines (keel) using inside clips providedby Manufacturer and approvedby the Architect/ Engineer-in-Charge. |
| 49 | Item No.24:- Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding shutters for loft of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box |
| 50 | Item No.25:- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete SSR I - 23.01 +10% Hilly Area+1% for FF |
| 51 | Item No.26:- Providing and fixing colour coated Zincalume (R) AZ 150 (min 150gms/sq.mt.total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5mmTCT), Hi-strength steel with min. 550MPa yield strength, metallic hot dip coated with Aluminium-Zincalloy (55%aluminium 43.4%zinc 1.6%silicon) with COLORBOND (R) steel quality superdurable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050mmeffectivecoverwidthandnominal25-30mmdeepribswithsubtlesquareflutinginthefivepanatnominal180-250mmcenter-to-center.Theendribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeedmaterialshouldhavecoilmanufacturersproductdetailsmarkedaregularinterval.Includingfastenerswithmin.fastenedwithmin.25umZinc-Tinalloycoated,Hexhead,self-drillingscrewetc.complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 52 | Item No.27:- Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.). SSR I - 38.05 +10% Hilly Area+1% for FF |
| 53 | Item No.28:- Providing and laying ceramic tiles of having size 30cm. x 30cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR I - 33.24 +10% Hilly Area+1% for FF |
| 54 | Item No.29:- Providing and laying Antiskid Ceramic tiles of approved quality of size 30cmx30cm and confirming to IS15622-2006 (Group-BIIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete SSR I - 33.67 +10% Hilly Area+1% for FF |
| 55 | Item No. 30:- Providing & fixing Information sign board of size 90cm X 60cmprepared on 16 gauge M.S. sheet with angle iron frame. etc. complete. |
