Tender For Welcome Maintenance And Certain Misc B/R And E/M Works Md Accommodation At Mil Stn Kaluchak Under Ge Kaluchak.; 1 Complete removalof existingold decorated plastered of wall by brooming down or by steel wire brushes, scrapingdown smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coats of oil bond distemper complete all as specified and as directed. 2 Preparation of old decorated plastered of wall by brooming down or by steel wire brushes, scrapingdown smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coats of oil bound emulsion complete all as specified and as directed. 3 Complete removal of existing treatmentof any description by washing, rubbing down and stopping of distempered/painted wall surfacesand applying two coats of oil bound emulsion over a 1mm coat ofwall putty, complete all as specified and as directed. 4 Preparation of previously untreated wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. 5 Preparation of old or previously untreated steel surfaces of any description over 10cm width or girth and applying one coats ofsynthetic enamel paint, complete all as specified and as directed. 6 Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, not exceeding 1.5 sqm, complete all as specified and as directed. 7 3mm thick ordinary quality plain sheet glass glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed. 8 3mm thick figured glass, pin headed and glazing with oil puttyin square not exceeding 0.50 sqm each panecomplete all as specified and as directed. 9 Taking up or down steel tubing and connections 15mm bore, complete all as specified and as directed. 10 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting exc. 10cm girth but not exc 20cm girth in brick/stone walls, complete all as specified and as directed. 11 CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 15 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe fixed in repair complete all as specified and as directed. Note :- The rate for pipe including all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening/connections such as Bib taps/Stop valve etc. 12 Repairs Bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed. 13 15 mm boreBib tap CP two way with hand shower (health fauset , ABS chromium plated) with 8 mm dia , 1 meter long flexible tube & wall hook fixed in repaircomplete all as specified and as directed. 14 Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repaircomplete all as specified and as directed. 15 Stop/Angle valves, cast copper alloy, 15mm bore (concealed type), screweddown, high pressure with capstan head, both ends screwed for iron pipe orfor union etc., fixed in repairs, complete all as specified and as directed. 16 Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repairs, complete all as specified and as directed. 17 Brass CP(3 in 1) wall mixer for screwed down for iron pipe andfixed in repaircomplete all as specified and as directed. 18 Brass CP wash hand basin mixer for making hot and cold water screwed down for pipe andfixed in repaircomplete all as specified and as directed. 19 Grating doom 125mm dia with waste hole of PTMTfixed in repair complete all as specified and as directed. 20 Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified and as directed. 21 Vitreous china, wash hand basin, flat back, white of size 580mmx450mmwhite flat back including cast iron brackets, cutting for and pinning the ends of brackets or erecting on stand incl 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated and 32mm bore brass chromium plated waste coupling with long screed shank and fly nuts PVC flexible waste pipe ofbore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side,fixed in repair complete all as specified and as directed. 22 Vitreous china, wash hand basin with padestal, flat back, white of size 580mmx450mmwhite flat back including cast iron brackets, cutting for and pinning the ends of brackets or erecting on stand incl 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated and 32mm bore brass chromium plated waste coupling with long screed shank and fly nuts PVC flexible waste pipe ofbore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, fixed in repaircomplete all as specified and directed. 23 PVC connections 15mm size with PTMT nuts of length 450mm, fixed in repairs, complete all as specified and as directed. 24 PVC connections 15mm size with PTMT nuts of length 600mm, fixed in repairs, complete all as specified and as directed. 25 Vitreous china wash down water closet pan (Pedestal pattern), white including P or Strap with white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500mm long PVC pipe,fixed in repair complete all as specified and as directed. 26 Vitreous chinaware squatting pan, Orissa Pattern size 580mm x 440mm with integral foot rests, white, with ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repair complete all as specified and as directed. 27 PVC valve less, syphonic action type flushing cistern,10 ltrs capacitylow level, white, with inlet ball valve, float and handle including PVC connection 15 mm size with PTMT nuts of length 600 mm long fixed in repair complete all as specified and as directed. 28 Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union, waste coupling, plug & chain, 40mm dia PVC flexble waste pipe etc. and overall size 915x460mm with bowl size 410x330x160mm,fixed in repair complete all as specified and as directed. 29 Stainless steel plate rack of size 750x900x250mm made out of 1mm thick stainless steel having partitions as per sample,fixed in repair complete all as specified and as directed. 30 Repair 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws & cup washers fixed in repairs,complete all as specified and as directed. 31 PVC bathroom cabinet made out of ABS materialwth mirror of size 45 x 60cm complete all as specified and as directed. 32 Dismantling of water tanks any descriptions exceeding 500 ltr but not exceeding 1000 ltr cap in any description complete all as specified and as directed. 33 Rotational moulded polyethylenewater storage tanks tripple layer (cylindricalvertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity and the weight of tank not less than 10 kg in each tank complete all as specified and as directed. 34 Rotational moulded polyethylenewater storage tanks. (cylindricalvertical with closed top ) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity ,and the weight of tank not less than 12 kg in each tank all as specified in SSR Part-I.complete all as specified and as directed. 35 Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 142gms) fixed in repaircomplete all as specified and as directed. 36 Decorative towel ring chromium plated 150 mm dia fixed with (CP) brass screws of approved quality as complete all as specified and as directed. 37 Brass Chromium Plated toiletpaper holder fixed with (CP) brass screws of approved quality fixed in repaircomplete all as specified and as directed. 38 Steel 32 mm dia decorative powder coated fancy type curtain rods with fixing brackets fixed in repairscomplete all as specified and as directed. 39 Mild Steel Brackets of pair powder coated for holding drapery rods fixed with screws to wallscomplete all as specified and as directed. 40 S&F in repair health faucet (ABS Body) Mild Steel Chromium Plated suitable for 15mm dia pipe with 1.25 metre suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and as directed. 41 PVC seat cover for EWC with fitted to screw complete all as specified and as directed. 42 CP soap dish complete all as specified and as directed. 43 PVC (SWR)floor trap75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and as directed. 44 75 mm dia PVC SWR pipe, single socketed in any lengthfixed in floor/wall including clamp and connected nahani trap complete all as specified and as directed. 45 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to wallscomplete all as specified and as directed. 46 110 mm bore PVC (SWR) bend, any radius complete all as specified and as directed. 47 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal complete all as specified and as directed. 48 Stack clamps made out of FI 50 X 5 mm and 16 mm dia round iron stays,including bolt and nuts and securing ends of stays to wall for 75 to 110 mm dia pipe complete all as specified and as directed. 49 Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed. 50 Rendering 5 mm thick in cement mortar 1: 3 on concrete surfaces as in ceilingsfinished even and smooth without using extra cement, complete all as specified and as directed. 51 Rendering 15 mm thick in cement mortar 1: 6 on fair faces ofbrick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified and as directed. 52 Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfacesfinished even and smooth with out using extra cement, complete all as specified and as directed. 53 Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. 54 18 to 20mm thick PVC celuka board with one side lamination of any colour as in kitchen cupboard shutters/shelves etc, fixed in repairs , incl magnetic counter scurew, beading, one handle on each shutter complete all as specified and as directed. 55 18/19 mm thick prelaminated particleboard interior grade, prelaminated one side with decoration choice lamination & other side balancingwhite lamination, fixed with screws to timber framework fixed in repaircomplete all as specified and as directed. 56 Continuous (piano) hinges, mild steel bright finish or electro galvanised width of flaps(when open) 30 in mmcomplete all as specified and as directed. 57 Taking downshutter of any description exceeding 1 Sqm and not exceeding 2 sqmeachand refixing the same openingcomplete all as specified and as directed. 58 Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 sqm each.complete all as specified and as directed. 59 Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed. 60 Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doorrs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. 61 30 mm thick flush shutter, solid core construction with block board core and plywood face panels commercial type and both faces is covered with decorative faces vaneer with lipping /frame to matchcomplete all as specified and as directed. 62 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified and as directed. 63 30 mm thick single piece factory made wire gauge shutter and incl of wire cloth(stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG ,size 19x19 mm complete in all respect with lock rail & beautified all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and as directed. 64 Factory made single extruded WPC (Wood Polymer Composite) solid UV printed decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. 65 Factory made doubleextruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 X 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified and as directed. 66 Box type steel windows comprising of tubular frame and shutters made out of 1.25mm thick MS steel tube, factory made, with double side shutters wire gauged shutter and glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf including other fittings, hinges, handles tarred hold fasts PCC blocks etc all as shown on Drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 complete all as specified and as directed.Notes : 1. The inside shutters shall be suitable for fixing wire mesh and outside shutters for fixing glass panes.2. The Wire mesh & glass panes shall bemeasured and paid separately.3. Steel window with frame, double shutters, grills, guard bars and connected items included as shown on drgs 67 Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and as directed. 68 Solid PVC door/cup board frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and as directed. 69 Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails.M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and as directed. 70 Butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified and as directed. 71 Aluminium alloy sliding door bolt powder coated,300 mm,anodized with hasp, staple (bolt type) and fixing clips of sheets,bolts and sliding bolts of extruded sections.complete all as specified and as directed. 72 Aluminiumpowder coatedbarrel tower bolt ofpowder coated of extruded section and fixed complete of size 200mm long complete all as specified and as directed. 73 Aluminum barrel tower boltof powder coated of extruded section and fixed complete of Size 150 mm long complete all as specified and as directed. 74 Aluminium handle powder coated cast type anodized of size 150mm complete all as specified and as directed. 75 Aluminum Handle powder coated cast type anodized of size 100mm complete all as specified and as directed. 76 Hasp and staple, size 75 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hingeplate andfixed with screwscomplete all as specified and as directed. 77 Mild steel stone enamelled Helical door spring 300mm size fixed to pressed steel frame/chowkhats including necessary fittingcomplete all as specified and as directed. 78 Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staplescomplete all as specified and as directed. 79 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. 80 Non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floorlaid over and including15 mm thick screed bed incement mortar 1:6, set and jointed in neat cement slurry and pointed inwhite or coloured cement to match complete all as specified and as directed.. 81 Non skid ceramic coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and as directed. 82 Non skid ceramic coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:3, complete all as specified and as directed. 83 Vitrified coloured tiles, jointless, light shade of size 596mm x 596mm x 9 to 10mm thick as in floors etc. bedded & jointed in neat cement slurry over and including 15mm thick screed bed in cement mortar1:4 and pointed in coloured cement to match the colour of tile complete all as specified and as directed. 84 Vitrified colouredtiles of any shade and any pattern of size 596mm x 596mm x 9 to 10mm thick on vertical surfaces such as skirting / dado etc. bedded & jointed in neat cement slurry over and including 10mm thick backing coatin CM 1:3 and pointed in coloured cement to match the colour of tile, complete all as specified and as directed. 85 16-18mm thick granite machine cut, including grinding and polishing, laid over 15mm thick cement screed in 1:4 and jointed with grey cement slury, including making 6mm vide and 18mm deep V groove, groove to be filled with silcon grouting, complete all as specified and as directed. 86 Anodised aluminium powder coatedframe for doors. Windows, ventilator with one or more rebates including joining cleats for fixing etc. complete all as specified and as directed. 87 Powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos in each dor, hinges, anodised aluminium snap beading screw etc complete all as specified and as directed. 88 Powder coated anodised aluminium window and ventilator shutters,sliding or fix type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed. 89 5mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket,complete all as specified and as directed. 90 Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and as directed. 91 Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:3, complete all as specified and as directed. 92 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed. 93 100mm Waste coupling for Sinkcomplete all as specified and as directed. 94 Preparation of newly plastered surface of wall & applying 3mm thick Acrylic wall care putty on wall surfaces and complete all as specified and as directed. 95 Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade , complete all as specified and as directed. 96 Preparation of newly plastered surface of ceilingand applying two coat of oil bound distemper, white or tinted shade , complete all as specified and as directed. 97 Floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. 98 Door cill in bottom for panelled or gauzed door with nails complete all as specified and as directed. 99 Preparing of new or previously untreated surfaces of wood of any description not otherwise describedover 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 100 Preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primercomplete all as specified and as directed. 101 Framed work rolled section as in framing compound girder staging for water tank,cooler frame ,chowkhatframe and the like built up from two or more beam or channel section or angles with plates stiffeners similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed. 102 Corner glass shelf (with bracket ) piece of 3 complete all as specified and as directed. 103 Non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floorlaid over and including15 mm thick screed bed incement mortar 1:6, set and jointed in neat cement slurry and pointed inwhite or coloured cement to match including taking down shutter and refixing in same place complete all as specified and as directed. . 104 Aluminum (die cast) body door closer hydraulically designation No 3 Universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 Kg, fixed in repairs, complete all as specified and as directed. 105 Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, complete all as specified and as directed. 106 25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets ( Model:- SS 25 BR, Vista) near to ends with stainless steel finials ( Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends. Note :-The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings) 107 Steel fasteners of size 75mm long drilled and fixed to walls complete all as specified and as directed. 108 Mortice lock 4 lever vertical type size 100 mm long complete all as specified and fixed in repair complete all as specified and as directed. 109 Complete removal ofexisting treatmentof walls surfaces including brooming down or steel wire brushing scraping down smoke soot , mould, moss andefflorescent salts and tradingoil and greasy spots,and applying two coats of weather proof exterior emulsion paintof anti fungal natureon walls complete all as specified and as directed.Note : The work will be carried out upto tripple storey builing the rate of scafolding is included for this item also. 110 Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal dia of pipe 200mm, complete all as specified and as directed. 111 Plain cement concrete type D-2,1: 4 : 8(using 40mm graded crushed stone aggregate) in bed to 150mm bore SGSW drain pipe including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and as directed. 112 150mm dia DWCPE(SN8) HDPE pipes laid in treanches on PCC bed jointed as per manufacturers instructioncomplete all as specified and as directed. 113 Reinforced concrete pipe class NP-2150 MM laid and jointed complete with collorscomplete all as specified and as directed. 114 Takingout carefully copper/aluminium point wiring,Light,fan,socket or powercomplete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floorscomplete all as specified and as directed. 115 Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site complete all as specified and as directed. 116 Taking down ceilling fan/exhaust fans and deposite to MES store yard from site complete all as specified and as directed. 117 Taking down Geyser any capand deposite to MES store yard from site complete all as specified and as directed. 118 Taking down existing unserviceable submain wiring any size and making good the disturbed surface complete all as specified and as directed. 119 Point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and includingrigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and includingpressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfacecomplete all as specified and as directed. 120 All as per item No 119 above but for one fan point controlled by one piano switchcomplete all as specified and as directed. 121 All as per item No 119 above but One light point controlled by two way switch complete all as specified and as directed. 122 All as per item no-119 above but for one bell point controled by one bell pushcomplete all as specified and as directed. 123 All as per ser item No 119hereinbefore but for one 3 pin socket outlet 5 Amp Same boardcomplete all as specified and as directed. 124 All as per ser item No 119 hereinbefore but for one 3 pin socket outlet 5 Amp independent complete all as specified and as directed. 125 All as per Item no 119 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed. 126 Point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and includingrigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and includingpressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfacecomplete all as specified and as directed. 127 All as per item no-126 above but for one fan point controled by one piano switch complete all as specified and as directed. 128 All as per item No-126 above but for one bell point controled by one bell push complete all as specified and as directed. 129 All as per item No 126 above but One light point controlled by two way switchcomplete all as specified and as directed. 130 All as per ser item No 126 hereinbefore but for one 3 pin socket outlet 5 Amp Same.boardcomplete all as specified and as directed. 131 All as per ser item No 126 hereinbefore but for one 3 pin socket outlet 5 Amp independentcomplete all as specified and as directed. 132 All as per Item No 126 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed. 133 All as per item No- 126 above butin PVC casing & caping for One light point or one fanpoint controlled by one switchcomplete all as specified and as directed. 134 All as per item No-126 above but for one bell point controled by one bell push all as specified and as directed. 135 All as peritem No 126 hereinbefore but for one 3 pin socket outlet 5 Amp Samecomplete all as specified and as directed. 136 All as peritem No 126 hereinbefore but for one 3 pin socket outlet 5 Amp independentcomplete all as specified and as directed. 137 All as per Item no 126 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed. 138 Modular type switch, one way 6 Amps , 1 module complete all as specified and as directed.. 139 Modular type switch, Two way 6 Amps , 1 module complete all as specified and as directed. 140 Modular type switch, one way 16 Amps, 1 module complete all as specified and as directed. 141 Modular type socket 5 pin, 6 Amps 2 module complete all as specified and as directed. 142 Modular type socket 5 pin, 6 A/16 Amps2 module complete all as specified and as directed. 143 Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. 144 Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings ,complete all as specified and as directed. 145 LED Bulb cool white 10 Watt Elegant design direct fit for easy installation complete all as specified and as directed. 146 Bell push Modular type piano 5 Amp complete all as specified and as directed. 147 Bell multi music 230 volt ,AC single pole complete all as specified and as directed. 148 Switch piano flush type single pole, two way 5 Amp , complete all as specified and as directed. 149 Switch piano flush type single pole, one way 5 Amp , complete all as specified and as directed. 150 Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed. 151 Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed. 152 Electronic fan regulator modular stepped type,two modulewith five step 240 volts,100Watt suitable for 1200/1400 mm sweep AC ceiling fan complete all as specified and as directed. 153 Electronic fan regulator stepped type, with five step 240 volts,100Watt suitable for 1200/1400 mm sweep AC ceiling fan complete all as specified and as directed. 154 Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extrudedLED batten complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed. 155 Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed. 156 Factory made epoxy powder coated Distribution board VTPN 6 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoing complete all as specified and as directed. 157 Factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and as directed. 158 All as per item No- 157 here in above but 8 way complete all as specified and as directed. 159 MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified and as directed. 160 MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all as specified and as directed. 161 MCCB 415 Volt16 KA 4 Pole 125 Amps complete all as specified and as directed. 162 Single core PVC insulated unsheathed multistanded copper conductor cable 1 Sqmm , 1100 Volts ISI marked drawn through existing conduitecomplete all as specified and as directed. 163 Sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed. 164 Earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire4 mm dia by means of bolts, nuts,check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and alsoremoval of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall complete all as specified and as directed. 165 LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. 166 LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and as directed. 167 Exaust fan / fresh air fan including oiling/greasing of fan with provision of flexiable cable twin core all as reqd at site. all as specified and directed by Engr-in-Charge.M&L for cutting of suitable size of holes for 300/250 mm sweep exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing walls complete all as specified and as directed. 168 Single pole and neutral encloser with a two pin and earth plug and socket coplete with one single pole mcb 20 ampscomplete all as specified and as directed. 169 Taking down electric energy meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface complete all as specified and as directed. 170 Ceiling fans complete with blades,and accessories obtained vide srl Item No-116 above withand oiling/greasing of fan with provision of flexiable cable twin core all as reqd at site. complete all as specified and as directed. 171 Fixing only electric water heater, geyser storage type obtained vide srl Item No- 117 complete with provision of fixing Nut bolts as required at sitecomplete all as specified and as directed.
