Tender For Addn/Altn To Bldg No P-16 In Sect C At Patiala Mil Stn; 1 Demolition of brick work built in cement mortar complete. 2 M&L Brick work with sub class B bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed. 3 Demolition of cement concrete reinforced roofs,floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. 4 Cutting chases, pinning in, brickwall/concrete block/slabs making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,slab etc.;etc. and making good, cutting exceeding 20cm girth complete all as specified and directed. 5 Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in Cement mortar 1:4 completecomplete all as specified and directed. 6 Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft soil complete all as specified and directed. 7 Returning filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm thick in soft soil complete all as specified and directed. 8 Removal of excavated soil to a distance n. exc 50and depositing where directed at a level n.exc. 1.5 m above the starting pointcomplete all as specified 9 M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm gradedstone aggregate) in foundations, filling and mass concrete complete all as specified and dirtected. 10 M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work with fair finish complete all as specified and dirtected. 11 M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and dirtected. 12 M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and dirtected. 13 M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and dirtected. 14 M&LPCC 1:2:4 type B-1as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and dirtected. 15 M&L PCC 1:2:4 type B-1 as in Beams, cantilevers, bressummers, lintels etc complete all as specified and dirtected. 16 M&L PCC 1:2:4 type B-1 as in Columns, pillars, piers, posts and struts complete all as specified and dirtected. 17 M&L PCC 1:2:4 type B-1 Slabs supported on walls,beams and columns in floors, roofs, shelves and the like complete all as specified and dirtected. 18 S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clipscomplete all as specified and directed. 19 S&F Mild steel TMT bars 5 to 10mm dia., as in stirrups, spacers & binders complete all as specified and directed. 20 M&L for efflorescence treatment to walls complete in all respect with following procedure :-(a) Taking down existing plaster , washing/rubbing down loose particles from wall surfaces. Rinse the surface with clean water and pointing the joints in cement mortar 1:3 complete all as specified and directed. (b) The bricks so pointed shall be cleaned of all dust or deposit using brush and applying two coats of smartcare damp proof coating 2K of make Asian paints or equivalent in berger Paints/Nerolac paints.(c) Thereafter M&L for plastering 15mm thick over the treated surface shall be done with 1:4 cement sand mortar using WPC. Note : Thecomplete item shall be gotexecuted through the authorised applicator of manufacturer only all as directed by Engr-in-charge. Applicator shall be got approved from GE before execution of work. 21 Taking down cement plaster on brick walls built in cement mortar including raking out joints and concrete surfaces as in wall or ceiling etc.including hacking for key, scrubbing down with water etc complete all as specified and directed. 22 M&L 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed. 23 M&L 10 mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth withoutusing extra cement complete all as specified and directed. 24 M&L 15 mm thick cement plaster in CM 1:4 on brick work or concrete surface other than fair face or brick work and finished surface even and smooth without using extra cement complete all as specified and directed. 25 M&L preparation of new plastered surface of ceiling and applying three coat of white washcomplete all as specified and directed. 26 M&L preparation of old plastered surface of ceiling and applying one coat of white washcomplete all as specified and directed. 27 M&L for preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of OBD overa coat ofwall care putty to make surface smooth complete all as specified and directed. 28 M&L for complete removal of existing surfaces of walls including cornices, pillasters etc, and applying two coats of OBD over and incl a coat ofwall care puttyto make surface smooth complete all as specified and directed. 29 M&L for preparation of newly plastered surfaces and applying 02 coats of exterioremulsion paint to exterrnal walls /RCC surfaces/ soffits of chajjas /roof projections/ cantilevers / balcony etc surfaces over & including a coat ofprimer and over and incl wall care putty complete all as specified and directed. 30 M&L for complete removal of existing treatment on walls and applying 02 coats of exterioremulsion paint to exterrnal walls/RCC surfaces/soffits of chajjas /roof projections/ cantilevers/ balcony etc surfaces over & including a coat ofprimer and over and incl wall care putty complete all as specified and directed. 31 Demolition of cement concreteun -reinforced in ground floors and pavings n.exc 15cm thicknesscomplete all as specified. 32 Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed 33 M&L Hard core broken stone boulders of gauge not exceeding 63mm broken stone deposited spearding and levelled in layers not exceeding 15cm thick watered and well rammed to a true surfaces complete all as specified and directed. 34 M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm aggregate) in floors complete all as specified and directed 35 M&L for 25 mm thick cement concrete type B-2 1:2:4 (12.5mm graded aggregate) as in floor or similar works complete all as specified and directed. 36 M&L ,full bodyvitrified tile, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry incl 15mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match, in floors etc. complete all as specified and directed. 37 M&L full bodyVitrified tile , stain & scratch resistant, joint free, premium quality coloured tiles of size 600x600x9to10 mm thick ason vertical surfaces such as skirting/ dado etc length of each tile not less than 600 mm , set and jointed in neat cement slurry over and including 10 mm thick rendering in cement mortar(1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles completre all as specified. 38 S&F Glazed ceramic tiles (coloured tiles) in vertical surface 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4on other than fair face of brick work all as specified and directed. 39 Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior grade WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etcset & jointed in neat cement slurry & incl and over 15 mm thick screed in cement mortar (1:4) pointed in matching colored polymer cement based grout to match complete all as specified and directed. 40 S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles, over and including 15mm thick screed bed in CM 1:6, complete all as specified as directed by Engr-in- Charge 41 Machine cut kota stone slab as in flooring 18-20 mm thick,set and jointed in cement slurry over & including screedof 15 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified.Note :1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained.2. The colour of the slabs shall be uniform. 42 M&L for machine cut kota stone slab as in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified 43 M&L for 75mm thick in PCC 1:3:6 type C-1 as in plinth protection surface finished even and smooth without using extra cement comlete all as specified and directed 44 M&L for 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, pillars, cooking platforms and like in cement mortar 1:4 including ponting in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed. 45 Dismantling wall and ceilingboard of insulation boards/ slabs/ blankets any description and thickness in any posn incl cover fillets complete all as specified and directed. 46 S&F false ceiling of 12.5mm thick gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturers instructions in two/three levels and making recess for light fittings as per pattern/design approved by Accepting Officer and including supply and fixing of items all as specified as below :- (a) Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres.(b) Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid.(c) Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} (d) Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. (e) Single layer of 12.5mm tapered edgePlain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling.(f) Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing withPro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape and applying 02 coats of interior emulsion over a coat of wall care putty including a coat of primer all as specified. Note : Thecomplete item shall be gotexecuted through the authorised applicator of manufacturer only all as specified and directed. 47 S&F PVC hollow Wall panelling of section sizes 150x5 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer complete all as specified and directed. 48 S&F Poly coated GI frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleves and screws at 450mm centre to centre/intermediate chaqnnel 0.9mm thick having to equal flanges of 15mm each and web of 45 mm suspended from soffit and approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section(not exc 1.2 metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acorss the intermediate channel at 457mm centre to centre and hangers 6mm dia GI (upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3mm size 60mm long complete with and including 8mm thick PVC laminated gypsum tiles of size 595x595mm of approved designas approved by GE all as specified & directed 49 Taking down chowkhats or frames of any description exc 1.5 Sqm and n. exc. 4 sqm each (without taking off shutters from the frame) including cutting hole to size for receive fresh PCC of hold fast and making good the disturbed surface same complete all as specified and directed. 50 Taking down chowkhats or frames (without taking off shutters from the frame) not exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. 51 S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing 52 S&F factory made solid PVC moulded door shutter with wood free EPS,28 to 30mm thick (stiles),with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and botom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stils and rails with suitable PVC sheet beading and jointed together with solvent cement , includin supplying and fixing in the frme with 3 Nos stainless steel butt hinges complete all as specified and directed by Engr-in -Charge including S&F the following items:(a) Stainless steel (304 Grade) finished butt hinges 100mm-3 Nos per leaf.(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf 53 S& F factory made Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including supply & fixing lugs, 125 mm size hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. 54 M&LPCC 1:3:6 type C-0 in 12.5 mm graded stone aggregates as in hold fast filling inside frame & hold fasts etc complete all as specified and directed. 55 S&F factory made flush shutters 35mm thick 7ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items :(a) Mild Steel Butt Hinges 150mm - 3 nos. per leaf(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf. 56 S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40mm)all as specified and including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm -3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250mm- 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf. 57 M&L for two coat of synthetic enamel paintover one coat of pink primer to newwooden surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified and directed. 58 M&L for Powder coated (Minimum thickness of powder coating 50 micron) Anodised aluminium frames and shutters for doors, windows, ventilators, partition etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. 59 S&F 12mm thick toughned glass as in windows, partitionsand similar work including cutting to shape, drilling holes required including all necessary fittings (patches, connectors, brackets etc) all as specified and directed 60 S&F 5mm thick tinted glass for aluminium windows/doors including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete. 61 S&FPrelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with necessary arrangement to aluminium door shutter complete all as specified and directed 62 S&F in stainless steel wire cloth 0.36mm normal dia of wire and average with apparture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. 63 S&F powder coated aluminium butt hinges 100mm complete all as specified and directed. 64 S&F powder coated aluiminium tower bolt 100mm long complete. 65 S&F powder coated aluiminium tower bolt 200mm long complete. 66 S&F powder coated aluminium handles 100mm complete. 67 S&F powder coated aluminium handles american style 200mm complete. 68 M&L for door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. 69 S&F for aluminium mortice lock 2 levers verical type, size 100mm complete all as specified and directed. 70 S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters complete all as specified and directed. 71 M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in charge. 72 S&F for Framed work as in doors or gates of ornamental and intricate design of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and ornamental type(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeFe 410W (Gde- E- 250) quality-A Fe- all as specified & directed. 73 S&F for 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified 74 M&L for preparation of newly or previously untreated surfaces of steel or iron work over 10 cms width or girth and applying two coats of synthetic enamal paint over a coat of red oxideprimer complete all as specified and directed. 75 Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and as directed 76 Removing of Mud in roofs, any thickness, including plastering and leeping (whether full thicknesremoved or only a part thereof) 77 M&L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc. complete all as specified. 78 M&L for cement concrete 1:3:6 type C1 using 20 mm graded aggregate as in padding over roof, minimum thickness at khurra as 25 mm to maintain a slope of 1:100 complete all as specified and directed. 79 M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by Torch application complete all as specified 80 M&L factory madeCement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished and with grey cement and no pigmentslurry including 15mm thick screed bed of CM 1:6 complete all as specified and directed. 81 Supply only liquid water proofing compound complete. 82 M & L for PCC 1:2:4, type B-0 using 12.5mm graded stone agg as in roof curve, benching, mud stops, steps, coping and the like items slightly rounded or chamfered on the edges complete all as specified and directed. 83 Taking down eaves, gutters and rain water pipes (any sizes or pattern) incl all fitting incl cleaning for refixing or removing to store yard complete all as specified and directed. 84 S & F PVC(SWR) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washers, nuts etccomplete all as specified and directed. 85 Demolition by breaking up drain pipes salt glazed stone ware pipe, AC or reinforced concrete of internal dia 100/150/200/300 mm dia jointed in cement mortar and taking out of from trenches removing the debries from site complete all as specified and directed by Engineer-in-Charge 86 Providing and laying 110mm dia UPVC soil, waste and vent pipes (Sch-80) in any length with or without ears, joint with solvent, laid in trenches or in floors and making necessary connectionscomplete all as specified and directed. 87 S & F PVC (SWR) bends/tees of any radius for 110mm bore complete all as specified and directed. 88 M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. 89 M&L for PVC floor/multi trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete typeB-1 (1:2:4) complete all as specified and directed. 90 S&F in repair rotational moulded polythene, two layered, water storage tank 500 Ltrs capacity, white colour, closed top, cylindrical, hoisted and fixed in position including minor repairing to iron pipe if any for making connections complete all as specified and directed . 91 S&F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm complete all as specified and directed. 92 S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 93 S&F vitreous china premium/1st quality wash down water closet single piece EWC S/P trap white/ivory/off white including connection to drain (or out going pipe), antisyphonagee pipe,etc.,and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mmcomplete and taking down existing of any description/size complete in all respect all as specified. 94 S&F in repair Vitreous China wash down pedestal pattern EWC, white water closet pan with intergral trap includingseat cover ,making necessary connections to drain and to flushing pipe antisyphonage pipe etc, jointing to PVC/CI and flush pipe including making good to floor complete all as specified and directed. 95 S&F in repairs vitreous China Squatting pan Orrisapattern size 580x440mm white with integral foot rest,and jointing to PVC/CI bend and flush pipe complete including making good to floorcomplete all as specified & directed. 96 S&F in repairs PVC flushing cistern dual type 10 Litres capacity incl all accessosaries complete all as specified and directed. 97 S&F in repair Vitreous China Urinal, full stall type ,including connections to flushing pipe and outgoing pipes fixed in repairswhite , all as specified and directed. 98 S&F in repairs vitereous china wash hand basin, white, flat back of size 550 x 400 mm with pedestal including brackets, cutting for pinning in ends of brackets or erecting stand complete all as specified and directed. 99 S&F in repairs in 15mm bore Stop Valve (Angle Valve)chromium plated fancy typecomplete all as specified and directed. 100 S&F in repairPVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 101 S & F in repair 15 mm borePillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 102 S&F in repair Brass CP mixer for WHB for mixing hot & cold water screwed down for iron pipe and for 15 mm bore ofpipecomplete all as specified and directed by Engineer in Charge. 103 S&F15 mm bore bib tap, fancy typechromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. 104 S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed by Engineer in Charge. 105 S&F in repair single leverSink mixer withswinging spoutwith connecting legs and wall flanges, wall mounted fancy type chromium plated cast copper alloy screwed down high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in positioncomplete all as specified and directed by Engineer in Charge. 106 Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore. 107 Supplying and laying CPVC pipes 20mm inner dia SDR 11 & Plain CPVC SDR 11 fittings includingcutting chases in wall and floor andmaking good complete all as specified. 108 Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore. 109 S&F Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. 110 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible CP tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. 111 S&F stainless steel grating 100 mm dia size round shaped for floor trap fixed in position complete all as specified . 112 S&F stainlesssteel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. 113 S&F in repair 600x450mm bevelled edge mirror or selected quality galass, mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. 114 S&F tubular towel rail 600mm long brass chromium plated fancy type, fixed as in repair complete all as specified and directed. 115 S&F in Repair Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof/chajja covering, cladding to wall, fixed with self tapping screws Complete all as specified and directed 116 S&F 18 mm thick HDHMR board of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. 117 S&F 18 mm thick HDHMR board of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed. 118 S & F Continuous (piano) hinges, width of flap when open 40mm,mild steel, bright finish or electrogalvanised complete all as specified and directed 119 S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions all as specified. 120 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished150mm long matt finished complete fixed in position all as specified. 121 Takingdown carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etcremoving materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of creditand making good the disturbed portion of all floor, ceiling etc all as specified and directed. 122 M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge.Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii)-Cost of Eye/bottle thimblesused for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. 123 All as per Sl item No 122.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. 124 All as per Sl item No 122.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. 125 All as per item No.122.00 herein beforebut 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSHcopperearth wire for switch socket combination 3 pin 15 amps on independent board. 126 S & F in replacement of Modularswitch1 way, 6 Amps, 1 module, 230 volts complete all as specified. 127 S & F in replacement of Modularswitch1 way, 16 Amps, 1 module, 230 volts complete all as specified. 128 S & F in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. 129 S & F in replacement of Modularsocket 5 pin 6 &16 Amps, combination type2 module complete all as specified. 130 S & F in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. 131 S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm3 terminals all as specified & directed 132 Supply and fixLed Stellar Square/round recessedMounted slim and and Elegant Downlight /Panel for indoor application of Ceiling decorative light with high aesthetic appeal of capacity 20 watt, minimum 100 lumen/watt having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90.complete with all electrical connection up with PVC insulated twin coreflexible copper conductor cable of suitable sizecomplete all as specified and directed. 133 Supply and fix surface/recess mounted LED luminaire 36 watt cool white 4000-5000K suitable for gridd celling cutout dimensions: 2x2 Ft. incl connecting with twin core copper wire from ceiling rose to fitting, Fixture size: (LxWxH) in (595x595x65) mm incl lamp and driver all as specified & directed. 134 S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. 135 S & F in replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge. 136 M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit)Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc.10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring. 137 S & F MCCB, 4 Pole, 125 A, 25 KA for fixing in DB including proper thimble connection, thermal and magnetic release protectioncomplete all as specified and directed by Engineer-in-charge. 138 Supply and fix in replacement of epoxy power coated MCCBdistribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimblesused for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iii) connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size complete all as specified and directed by Engr-in-charge. 139 S & F in replacement of Sheet metal enclosureDB TPN 4 ways double door 415 volts with 200 Amps standard bus bar of suitable size and common neutral link flush mounting type, drilling holes for incoming and out going cables complete with IP-43 protection complete all as specified and directedby Engr-in-charge 140 S & F in replacement of MCB, TRIPLE pole & neutral (TPN) 10 KA 240 volts 40 to 63 Amp capacity fixing in DB’s complete all as specified and directed. (Note: MCB should be B or C curve as directed by engineer in charge) 141 Supply and fix in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs areto be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link allflush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed byEngr-in-charge. 142 S & F in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. 143 Supply and fix in replacement of MCB , SPN, 240 Volts ,40-63 amp for fixing in DBs ofincluding proper thimble connections complete all as specified and directed by Engineer-in-Charge. 144 M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runsof 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Runof 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of(i) Rigid non-metallic PVC conduit of 25 mm dia withtees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc.10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring. 145 M & L in replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497 complete all as specified and directed by Engineer in Charge. 146 S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in squareLED Batten 18/20W 6500Kof capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. 147 XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core supplied& laid in replacement complete all as specified& directedby Engineer-in-Charge. 148 XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core supplied& laid in replacement complete all as specified& directedby Engineer-in-Charge. 149 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. 150 Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm abovewith dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed. 151 Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete 1:2: 4 type B-0 all as specified and directed. 152 Supplying & laying factory made unreinforced Precast concrete cable coversclass LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables completeall as directed by Engr-in-Charge 153 Material and labour for replacement of GI tubing light grade 40 mm borefor passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. 154 Taking down and refixing of ceiling fan after supply and replacement of rubber reel, round cover plate of size 6 inch of ceiling fan complete with ms split clamp two Nos, nuts and bolts complete all as specifiedand directed by Engr-in-charge. 155 Supply and fix Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directedby Engineer-in-Charge. 156 Material and labour for making hole of suitable size for PVC exhaust fan 250 mm sweep in wall for grouting and making good the surface complete all as specified and directed by Engr-in-charge. 157 Taking down of Split AC 1.5 Ton from existing wall and submitting both indoor and outoor unit to AGE E/M store.Note: Cost of transportation has been catered in this item. 158 Supply and fix air cooled split unit air conditioner hot and cold electric driven single phase of capacity of 1.5 TR, BEE 5 star rated 159 Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 04 KVA 160 Supply and fix ofcopper pipe heavy duty of size 5/8 complete all as specified and directed. 161 Supply and fix ofcopper pipe heavy duty of size 3/8 complete all as specified and directed. 162 Supply and fixing pipe insulation for copper pipe of size 5/8 and 3/8 complete all as specified and directed. 163 Taking down and Refixing of window AC 1.5 ton with connected nuts and bolts to existing/ new location as specified by the EIC .Note: Cost of transportation from AGE E/M back to site of installationhas been catered in this item 164 Supply and fixingsingle pole and neutralenclosure with a two pin and earth plug and socket complete with MCB SPN 32 Amps, complete all as specified and as directed by Engineer-in-charge. 165 Taking downof Geyser 25 ltr and submitting to AGE E/M Store as drirectd by EIC. Note:Cost of transportation has been catered in this item. 166 Supply and installing ofwater heater storage type of capacity 25 liters BEE 5 star rated with electrical heating back up of 2 KW including all necessary required acessiories like pvc / cp connections, necessary nut bolts, washers, screws etc and make up water tank complete all as specefied and directed. 167 S & laying GI tubing medium grade 15 mm bore with all necessary fittings like elbow, reducer, T-joint, nipple and passing throughbrick walls, ceilling orlaying in floors, tapping from existing lines and necessary cutting, caushing of walls etc complete all as specefied and directed. 168 S & F gun metal gate valve, suitable for 15mm bore GI pipe with iron wheel head, screwedboth end for GI pipe with all necessary fittings complte all as specefied and directed. 169 S & F gun metal non returnvalve, suitable for 15mm bore GI pipe with screwedboth end for GI pipe with all necessary fittings complte all as specefied and directed. 170 Supply and fix single arm GRP pole of 5 mtr cyclindrical/square with bracket having high impact strength, high bending strength, non conductive, electric insulator, shock proof and non effective from chemical, salt and smog with suitable size of GI nut bolts and taper including PCC work, complete all as specified and as directed. 171 Supply and fix including commissioning and testing of 20 watt Solar integral AIO (All-in-One) street light with high pressure die-cast (LM6 Alloy) Aluminium housing, reliable & robust construction with IP65 & IK08 protection, suitable for OD 50/60mm bracket, having Min 4500 system lumens, suitable for 24hrs (2 Nights) Autonomy. The luminaire should work on Hybrid mode with priority for solar, in case solar charging is not available then it should automatically switch to AC grid supply for reliable operation. Dimming Profile: From Dusk – First 04 hours full brightness level • Next fixed at 30% Brightness level• Lithium Pherrophosphate Battery capacity min 30Ah@12.8V or 256Wh & Battery Temp range -10 to +50℃. Panel capacity min 60Wp, CRI >=70, System Efficacy >150lm/W, & system wattage should not be more than 30W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. The fixture should have designed for street light application & should have flexible angle of mounting from 0-15 Degree for divers geographical condition. Life class of LED System 50000hrs@L70. LED Note :-Certified, charger efficiency >90% and standards IEC62109-1, IEC61547, CISPR15,IEC62093, IEC61347-2-13, EN50530, IEC62384 or equivalent BIS Standards. The PV module should be made up of crystalline silicon solar cells Mono-Crystalline and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598, Operating temp -10 Degree C to 50 Degree C, certifying above given parameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory. Complete all as specified and directed.
