}

Tender For Repair/Renovation To Various Residential Buildings Under Division No Iii Shimla. (Sh -Construction Of Steel Pedestal For Providing Water Tank For Q-2 Block Set No 105-112 At Nabha Estate Shimla.), nabha-Himachal Pradesh

Public Works Department has published Tender For Repair/Renovation To Various Residential Buildings Under Division No Iii Shimla. (Sh -Construction Of Steel Pedestal For Providing Water Tank For Q-2 Block Set No 105-112 At Nabha Estate Shimla.). Submission Date for this Tender is 25-07-2025. Building Work Tenders in nabha Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

50198060
Tender For Repair/Renovation To Various Residential Buildings Under Division No Iii Shimla. (Sh -Construction Of Steel Pedestal For Providing Water Tank For Q-2 Block Set No 105-112 At Nabha Estate Shimla.)
Tender
Indian
Himachal Pradesh
Nabha
25-07-2025

Tender Documents

Tender Details

Repair/Renovation To Various Residential Buildings Under Division No Iii Shimla. (Sh -Construction Of Steel Pedestal For Providing Water Tank For Q-2 Block Set No 105-112 At Nabha Estate Shimla.) Repair/Renovation To Various Residential Buildings Under Division No Iii Shimla. (Sh -Construction Of Steel Pedestal For Providing Water Tank For Q-2 Block Set No 105-112 At Nabha Estate Shimla.) , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 15 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within All Leads & Lifts. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering Complete Including Carriage Of Materials Within All Leads And Lifts As Per Direction Of Engineer - In - Charge - All Work Up To Plinth Level:- 1:5:10 (1 Cement : 5 Fine Sand :10 Graded Stone Aggregate 40Mm Nominal Size) , Providing And Laying Cement Concrete 1:2:4 (1 Cement:2 Sand:4 Graded Stone Aggregate 20Mm Nominal Size) And Curing Complete Excluding Cost Of Form Work In Foundation And Plinth Including Carriage Of Materials Within All Leads And Lifts. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works Complete Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing M.S. Welded Mesh 25Mm X 25Mm X 3Mm Thick As Per Approved Design Complete By Welding With Electrical Plant Complete Including Applying Priming Coat Of Red Lead Paint As Per Hp.Pwd. Specification 1990 Volume-1 And Including Carriage Of Materials Upto All Leads And Lifts By Mechanical Means And Manual Labour And As Directed By The Engineer In Charge , Providing And Fixing Tata Durashine Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.60Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineerin-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5 X 55Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Itr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Itr/10 Sqm Of Approved Brand And Manufacture Including Carriage Of Materials In All Leads And Lifts , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank (1000Litre Capacity) , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.External Work - Exposed On Wall 15Mm Dia Nominal Bore Complete Including Carriage Of Materials In All Leads And Lifts. , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.External Work - Exposed On Wall 20Mm Dia Nominal Bore Complete Including Carriage Of Materials In All Leads And Lifts. , Providing And Fixing 15Mm Size G.I./M.I Union Of Following Sizes (Where Not Included In The Items Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing 20Mm Size G.I./M.I Union Of Following Sizes (Where Not Included In The Items Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) Including Carriage Of Materials Within All Leads And Lifts:- (I) 15Mm Nominal Bore. , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) Including Carriage Of Materials Within All Leads And Lifts:- (I) 20Mm Nominal Bore. , Providing And Fixing Ball Cock With Float Ball Complete Of Size 15Mm Complete Including Carrriage Of Materials In All Leads And Lifts , Providing And Fixing M.S Sliding Door , Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 250X16mm. , Providing And Fixing M.S Tower Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 200X10mm. , Providing And Fixing M.S Handles, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete :125Mm. , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50M Initial Lead, For All Leads Including All Lifts Involved Complete Including Carriage Of Materials Within All Leads And Lifts.

Key Value

Document Fees
INR 500 /-
EMD
INR 22040.0 /-
Tender Value
INR 11.01 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail