|
| 1 | Dismantling and Clearing away from this site for exisiting damaged condition of workfor including cost for all labour charges etc., Complete as per standard Specification.i) RCC Work |
| 2 | ii) Brick Work for Step |
| 3 | Steel shuttering with MS Sheets and MS angels including fixing in position with country wood scantlings for drain side wallsincluding cost and conveyance of all materials and all labour charges to site and other incidental charges etc., complete.as per standard specification 86 A & 86 K i) RCC Plain Surface |
| 4 | Square Colum |
| 5 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456-2000 Using 20mm and down grade hard broken granite Stone jelly for all RCC items of works with mimimum cement contenet of 325 kg /cum and maximum water cement ratio of 0.55 incluting admixtur(plasticier /super plasticiser ) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workabillity without imparing strength and durabillity with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum),5156 kg of 10- 12mm machine crushed stone jelly and with about (4.79 cum) 7670kg of sand but excluting cost of reinforcedment grill and fabricating charges centering and shuttering but incluting laying vibrating with machine vibrating ,finishing ,curring ,etc,,and providing fixtures like fan clamps in the RCC Floor /roof slabs wherever necessary without claiming extra cost etc., compete complying with standard specificaton and as directed by the departmental officer -The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards. (No separate paymentswill be made by the depatment for the excess usage of materials ) |
| 6 | Supply and fabrication of steel using TMT rodsfor all Reinforced cement concreteworks including cost and conveyance of all materials and all labour charges for cuting, bending and placing the rod in position and tying up the rods with binding wire and other incidental charges etc., complete.as per standard specification SS 86 7 & 3, 86A V, VI & VII |
| 7 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\" X 4 3/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 8 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 9 | Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc.complete. |
| 10 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 11 | Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) |
| 12 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 13 | Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 14 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 15 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 16 | Providing and laying of 83mm thick high strength type conforming is 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification. |
