Tender For Special Repair To Bldg No P-07 (Fsc) At Mendhar Under Ge 881 Ews.; 1 B/R PORTION: M&L for roughening of of old concrete floor by picking, sweeping, cleaning by using steel wire brush and washing down with water, fanning dust etc and taking down tarfelt/cement plaster and removing demolished material to a distance exc 50 m, complete incl dismantling existing lightening conductor and refixing in same location incl repair/replacement if not working after completion of roof treatment, complete all as specified and directed. 2 M&L for brushing with neat cement slurry @ 3 Kg per sqm area mixed with integral water proofing compound as per manufacturers instruction, complete all as specified and directed.Note: WPC shall be ,measured and paid separately 3 M&L for 75 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in roof padding, complete all as specified and directed. 4 M&L for 10mm thick screed bed or bedding layers in cement mortar (1:3) with mixing ofwater proofing compound @ 200ml/50 kg of cement in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane andfinished the surfaces even and smooth without using extra cement, complete all as specified and as directed. (NOTE : Polymeric membrane & WPC shall be measured and paid separately under relevant item of this Schedule A). 5 M&L for applying a tack coat of industrial bitumen of grade 85/25 @ 1.2 kg/sqm including cleaning the surface,complete all as specified and directed. 6 M&L for preparation of surface by applying bituminous primer (conforming to IS-3384-1965) @ 0.4 kg/sqm and applying heavy treatment (for severe conditions), APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application and incl applying a coat of aluminium paint over APP membrane over a coat of primer, complete all as specified and directed. 7 Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. 8 M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brickwork or concrete surface ,finished even & smooth without using extra cement complete all as specified and directed. 9 M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or stone surfaces including finishing even and smooth with out using extra cement complete all as specified and as directed. 10 M&L for rough cast plaster, complete all as specified and directed. 11 M&L for MS wire chicken mesh of size 25 mm x 25 mm for jointing/fixing to concrete joists etc in walls, ceilings, stanchions, beams etc incl all laps, cutting and waste, complete all as specified and as directed. 12 M&L for 5mm thick rendering in cement mortar 1:3 on ceiling surfaces including finishing even and smooth with out using extra cement complete all as specified and as directed. 13 M&L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work not exc 15 cm in width or girth, including cutting to edges, all mitres and stopped ends, etc. , complete all as specified and as directed. 14 M&L for preparation of newly plastered surfaces and applying two coats of Apex paint (using single or camouflage colours as directed), complete all as specified and directed. 15 M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper over a coat of 1mm thick wall putty complete all as specified and directed. 16 M&L for preparation of newlyplastered surface of ceiling and applying two coats of white wash on ceiling, complete all as specified and directed. 17 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. 18 M&L for glazed ceramic colouredtilesof size450 mm x 350 mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Note: Shade/Colour of tile shall be approved by the GE. 19 Demolition of Concrete unreinforced of any description and in any position not otherwise specifically provided for, complete all as specified and directed. 20 M & L 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring/hardstanding, etc. complete all as specified. 21 M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10 mm thick in cm 1:4for laying floor finishes, complete all as specified and directed. 22 M&L for vitrified ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tilenot exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick screed bed in CM 1:6, complete all as specified and directed. 23 Taking down chowkhat or frame exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking of shutter from the frames ), complete all as specified and as directed. 24 Taking down chowkhat or frame not exc 1.5 Sqm each with shutters (without taking of shutter from the frames ), complete all as specified and as directed. 25 M&L for PCC 1:2:4, type B0, using 12.5mm as in, filling of chowkhat/frames etc complete all as specified and as directed. 26 M&L for Pressed steel frames for doors for size 105 x 60mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed. 27 M&L for Pressed steel frames for doors for size 125 x 60mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed. 28 S & F 35mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats, complete as specified and directed. 29 S & F 35 mm thick 2nd class hard woodplain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat, complete as specified and directed. 30 M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pinkprimer, complete all as specified and directed. 31 M&L for preparation of new steel & Iron surfaces, width or girth exceeding 10cm & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer, complete all as specified & directed. 32 S & F GIwire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed withtinned tacks or stainless steel wire stapleall as specified and directed. 33 M&L for preparation of old steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality, complete all as spd & directed. 34 Resecuring or easing and adjusting without taking down Chowkhats or frames exc 1.5 sq. mbut n exc 4 sq. m each, complete all as specified and directed. 35 Taking down shutter of any description exc 1 Sqm but not exc 2 Sqm each, complete all as specified and as directed. 36 S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, completeall as specified and directed. 37 S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with without glazing bars, dovetailed or welded, completeall as specified and directed. 38 Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one , complete all as specified and as directed. 39 M & L sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed. 40 S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube suppling and fixing in opening as per specification & drawing. 41 S&F Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement, fixed in the frame complete all as per manufacturers instructions. 42 S&F in repairs Butt hinges 100 mm long, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. 43 S & F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified & directed. 44 S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified & directed. 45 S& F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified & directed. 46 S & F 300 mm, mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete, complete all as specified & directed. 47 M&L for 50 mm thick cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed 48 M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 49 Taking up or down 20 mm bore steel tubing & connection including cleaning for or removal from site 15mm, complete all as specified and directed. 50 S&F GI tubing medium grade 20mm diawith all fittings, cutting, threading and fixing to walls,ceilingor in floors, complete all as specified and directed. 51 Taking up or down 15mm bore steel tubing & connection including cleaning for or removal from site 15mm, complete all as specified and directed. 52 S&F GI tubing medium grade 15mm diawith all fittings, cutting, threading and fixing to walls,ceilingor in floors, complete all as specified and directed. 53 S&F in repair 15mm dia Gun-metal, globe gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 54 S&F in repair 20mm dia Gun-metal, globe gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 55 S&F rotational moulded polyethylene water storage tanks ISI MARKED (Cylindrical vertical with threaded closed top) hoisted and fixed in position all as spd in SSR Pt-I, capacity in 500 Ltrs including dismantling existing water tank and removing to store, complete all as specified and directed. 56 S&F Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) complete all as specified and directed. 57 S&F in repairs 20 mm bore, Ball brass valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed. 58 S&F in repair 15mm bore dia bib taps, fancy type with chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. 59 S&F in repair 15 mm bore dia stop valve/angle cock with chromium plated cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down both ends for iron pipes or for unions and fixed with butter fly handle, complete all as specified and directed. 60 S&F in repair 15mm dia Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 61 S&F in repair 15 mm bore dia stop valve/angle cock with chromium plated cast copper alloy,fancy type with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed down both ends for iron pipes or for unions and fixed with butter fly handle, complete all as specified and directed. 62 S&F in repair telephonic hand shower (Health faucet) (ABS Body) MS chromium plated suitable forlongmm dia pipe with 1.25 mtr long flexible tube in chrome finish and ABS wall hook, complete all as specified and directed. 63 S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm widewith chromium plated bracket guard and railing 60cm long,complete all as specified and directed by Engr-in-Charge. 64 S&F in repair vitreous China wash down water closet pan (pedestal pattern),white (excluding fixing bolts, flushing cistern and flushing pipe) but incl plastic water closet seat cover, closed pattern with flat bottom with CP jet spray with aluminised hinging device, complete all as specified & directed. 65 S&F in repair High or low level PVC valveless, syphonic action type, flushing cistern of capacity 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. 66 S & F in repair, Wash basins, Vitreous China table top of size 530 mm x 420 mm x 140 mm, including cutting to marble/granite if required and CP coupling of suitable size alongwith waste pipe, complete all as specified and directed. Make: Jaquar cat part JDS-WHT-25907N or its equivalent in ROCA/KOHLER 67 M&L for 18-20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified and directed. 68 S&F PVC connection 45cm longfitted with PTMT nut and washer on both ends, fixed to 15mm diairon pipe,complete all as specified and directed. 69 S&F in repair PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe including clamps, complete all as specified and directed. 70 S&F in repair PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe including clamps, complete all as specified and directed. 71 Demolition or breaking up drain pipe (salt glazed ware, AC, PVC or reinforcement concrete) set in cement mortar/concrete complete all as specified. 72 S&F RCC pipes class NP2, 150mm dia laid in trenches and jointed with laid and jointed with collars, complete all as specified and directed 73 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth in any type of soil, complete all as specified and directed by Engineer-in-charge. 74 Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.Note : Punned down thickness shall be measured 75 Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed by Engineer-in-charge. 76 M&L for PCC bed to drain pipes including packing under and haunching against the sides of pipes for 150 mm bore after they are laid and tested in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. 77 Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. 78 M&L for walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. 79 All as per item No. 78 above, but except stone complete all as specified and directed 80 Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 40 mm as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. 81 M&L for raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:3, complete all as specified and directed. 82 M & L for cement concrete 1:2:4, B1 using 20 mm stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, copings, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. 83 M&L for Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in surface channels and drains, complete all as specified and directed. 84 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and directed. 85 E&M PORTION:-Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed. 86 M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cableand one single core 1.5 Sqmm(nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :- 87 One light/fan point controlled by one way switch 6 Amp complete all as specified and directed. 88 One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed. 89 One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed. 90 All as per srl item No 86 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed. 91 S&F Sub main wiring with single core cable 2x 6 Sqmm FRLSinsulated unsheathed stranded copper conductor cable 1100 Volts grade including suitable size PVC casing cappingmedium grade ISI marked alongwith 1x 6 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, incl dismantling old wiring and making good the surface by plastering and 2 coats of existing paint/colour complete all as specified and directed.Note:-Three wire of 6 sqmm and one run of PVC conduit/casing caping shall be measured as one unit. 92 S&F Sub main wiring with single core cable 2x 4 Sqmm FRLSinsulated unsheathed stranded copper conductor cable 1100 Volts grade including suitable size PVC casing cappingmedium grade ISI marked alongwith 1x 4 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, incl dismantling old wiring and making good the surface by plastering and 2 coats of existing paint/colour complete all as specified and directed.Note:-Three wire of 4 sqmm and one run of PVC conduit/casing caping shall be measured as one unit. 93 S&F switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. 94 S&F socket outlet2 in 1, 3 pin, 5 Amp flush type universal, complete all as specified and directed. 95 S&F switch piano flush type 15 Amp single pole one way, (ISI marked), complete all as specified and directed. 96 S&F socket outlet2 in 1, 3 pin, 15 Amp flush type universal, complete all as specified and directed. 97 S&F ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed. 98 S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. 99 S&F in repair LED inverter lamp,CDL, 9/10 watt, B22 base, complete all as specified and directed. 100 Supply and fixing in repair inverterLED batten 1x 20W, with square profile and polycarbonate channel, lithium iron battery with charging time of 8 to 10 hours and backup tile upto 04 hourswith driver, holder incl LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 101 Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed. 102 S&F in repair sheet metal enclosure for DBs, vertical TPN double door (IP43), 4 ways built in bus bars suitable for 415 volts, AC, 50 Hz and suitable for FP MCCB as incommer and out going SP/TP MCBscomplete all as specified and directed.Note:- MCBs shall be measured and paid separately. 103 S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. 104 S&F in repairMCBSPN 63 amps 240 volts 10 KA B curve, finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulating sliding shutter large two position dolly, ISI marked, complete all as specified and directed. 105 S&F in repairMCBSPN 40 amps 240 volts 10 KA B curve, finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulating sliding shutter large two position dolly, ISI marked, complete all as specified and directed. 106 S&F in repair MCBsingle pole 6 to 32 amps 240 volts 10 KA C series complete all as specified and directed. 107 S&F heavy duty metallic exhaust fan 300 mm sweep 1400 RPM, single phase 230 Volts including all connecting accessories, complete and taking out old existing exhaust fan, complete all as specified and directed. 108 Taking out old unsv ceiling fan from site of capacity 1200/1400 mm sweep and replacement withceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)incl all connecting accessories complete all as specified and directed by Engineer-in-charge. 109 S&F in repair single pole and neutral enclosure with a two pin and metal earth plug and socket complete with & incl one single pole MCB of 20 Amps complete all as specified and directed. 110 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. 111 Supply and fixing energy efficientLED light fitting 45 W, input voltage 110V to 280VAC, 50 Hz with ingress protection IP66, LM 80, standard luminaries with efficiency 100 lumen/watt with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70,PF>0.95, with short circuit & reverse circuit protection against10kV high surges, minimum 25000 burning hours (life), operating temperature 1 to 50oC, rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 45W=10%W, rated lumens, 120 degree view angle, constant current type driver having THD<10%, including all fixing arrangement like clamps, nuts, bolts, washers, 45W LED rod lamp (having PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. including bracket complete all as specified and as directed. 112 S&F in repair MCCB, 4 pole, 100 amps, 415 volts breaking capacity 16 KA, ICS = 75 % incl extended terminals, complete all as specified and directed. 113 Supply and laying, jointing and testing, 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 50 Sqmm 3.5 core, laid in trenches/on floor/pole or under road/culvert incl taking out old unsv cable, complete all as specified and directed.Note: Excavation shall be measured and paid separately 114 M&L for sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed.Note:- 1.Dry fine sand of best available quality shall be used.2.Punned thickness shall be made and paid. 115 Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed. 116 M&L for making bore to road/cement path/hardstanding/road for providing GI pipe 40 mm, both end socketed for passing armoured cable, incl making good the surface light grade galvanised with all fitting and fixed to wall/ceiling or laid in floor complete all as specified and directed. 117 S&F in repair tubes 40 mm, light grade galvanised with all fitting and fixed to wall/ceiling or laid in floor complete all as specified and directed. 118 S & F bus bar chamber of size 600 x 600 x 450mm suitable for 3 phase 433V outdoor type fabricated out of 3.15mm thick MS sheet with 300A rated aluminium busbar 4 Nos, PVC sleeves (coloured red, yellow, blue and black) with suitable locking arrangements and four legged angle iron stand made of angle iron of size 40x40x6mm duly grouted in and including foundation in PCC 1:2:4 type C1 using 20mm graded stone aggregates alongwith all necessary cable connections, lugs and cable glands including applying two coats of synthetic enamel paint (of approved tint) over a coat of red oxide Zinc chrome primer complete all as apecified and as directed. 119 S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to 25 x 6 mm galvanised MS strip by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed. 120 S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.
