}

Tender For Special Repair To Non Residential Building Under Dduzh Shimla. (Sh- Construction Of Frame Structure For New Tanks And Installation Of 5 Nos Pvc Tanks Per 10000 Litter Capacity)., Shimla-Himachal Pradesh

Public Works Department has published Tender For Special Repair To Non Residential Building Under Dduzh Shimla. (Sh- Construction Of Frame Structure For New Tanks And Installation Of 5 Nos Pvc Tanks Per 10000 Litter Capacity).. Submission Date for this Tender is 25-07-2025. Building Work Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

50180411
Tender For Special Repair To Non Residential Building Under Dduzh Shimla. (Sh- Construction Of Frame Structure For New Tanks And Installation Of 5 Nos Pvc Tanks Per 10000 Litter Capacity).
Tender
Indian
Himachal Pradesh
Shimla
25-07-2025

Tender Documents

Tender Details

Special Repair To Non Residential Building Under Dduzh Shimla. (Sh- Construction Of Frame Structure For New Tanks And Installation Of 5 Nos Pvc Tanks Per 10000 Litter Capacity). Special Repair To Non Residential Building Under Dduzh Shimla. (Sh- Construction Of Frame Structure For New Tanks And Installation Of 5 Nos Pvc Tanks Per 10000 Litter Capacity). , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Hepth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge All Kinds Of Soil Including Carriage Of Materials Within All Leads And Lifts. , Demolishing Stone Wall Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge Nominal Concrete 1:6:12 Or Richer Mix (I/C Equivalent Design Mix) Including Carriage Of Materials In All Leads And Lift As Per Direction Of Engineer In Charge. , Disposal Of Material By Mechanical Means On Approved Dumping Site Of M.C. Shimla Or On Arranged By The Contractor. I.E.Through All Mode Of Transportation Including Head Load Animal Load Or Mechanical Means Alongwithtransportation Of The Unuseful Material For Disposingincluding Payment Of Prescribed Charges Of Dumping To The Owener Of Dumping Site Through All Modes Of Transporation Including Head Load Animal Load Or Mechanical Means Alongwith Its Levelling, Fine Dressingand To Complete The Work By Mechanized Means And Labour(If Any Required) All Useful Materials Such As Stones, Aggregate And Slates Shall Be Sorted Out And Stacked Along Roads Side Any Loss Of The Public/Private Property During The Courses Of Execution Shall Be The Absolute Responsibility Of The Contractorwhich Shall Have To Be Dully Compensated By Him In All Respectas Per Direction Of Engineer-In-Charge . , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :-1:6:12 (1 Cement : 6 Coarse Sand) : 12 Graded Stone Aggregate 40 Mm Nominal Size) Including Carriage Of Materials Within All Leads And Lifts. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :-1:2:4 (1 Cement : 2 Coarse Sand) : 4 Graded Stone Aggregate 20 Mm Nominal Size) Including Carriage Of Materials Within All Leads And Lifts. , Vertical And Horizontal Fins Individually Or Forming Box Louvers Band, Facias And Eaves Boards , Providing Tor Steel Reinforcement For Reinforced Cement Concrete Work Including Bending, Binding,Cutting And Placing In Position Complete Including Cost Of Binding Wires Completed And Other Incidentals Due For Its Completion For All Floors, Within All Leads And Lifts Of Materials And Other Incidentals. Above Plinth Level Upto All Floorlevel Including Carriage Of Materials Within All Leads And Lifts. , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Providing And Fixing M.S. Welded Mesh 25Mmx25mmx2mm Thick As Per Approveddesigncomplete By Welding With Electrical Plant Complete Including Applyingpriming Coat Of Red Lead Paint As Per Hp.Pwd. Specification 1990 Volume-I And Including Carriage Of Materials Upto All Leads And Liftsby Mechanical Means And Manual Labour And As Directed By The Engineer In Charge. , Providing And Fixing 0.50Mm Thick Prepainted Steel Sheet Tata Durashine Or Equivelant In Roofing With Hot Dipped Metallic Zinc Coated Sheet With Top Coat Of Regular Modified Polyster (Rnp) Organic Coating Of 20 Microns Over 5 Microns Primer Coating To Back Coat Of Polyster Of 5Microns Over 5Microns Primer Coating I/C Fixing With Prepainted Iron J Or L Hooks, Bolts And Nuts 6Mm Dia Meter With Prepainted Limpet And Rubber Washers Complete With All Accesoriees As Required As Per The Direction Of Engineer-In-Charge Including Carriage Of Materials Upto All Leads And Lifts. , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank.(10000 Liter Capacity) , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc. 50 Mm Dia Nominal Bore , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) : 50 Mm Dia Nominal Bore , Providing And Fixing Brass Wheel Of Approved Quality (Screwed End) :50 Mm Dia Nominal Bore , Providing And Fixing Tee Of Approved Quality (Screwed End) :50 Mm Dia Nominal Bore , Providing And Fixing Extension Nipple Of 50Mm Diaof Approved Quality (Screwed End) :50 Mm Long , 75 Mm Long , 150 Mm Long , 275 Mm Long , Reducer 50Mm To25mm , Reducer Elbow 50Mm To25mm , Plug 50Mm , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.25 Mm Dia Nominal Bore , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) : 25 Mm Dia Nominal Bore , Providing And Fixing Wheel Of Approved Quality (Screwed End) :25 Mm Dia Nominal Bore , Providing And Fixing Tee Of Approved Quality (Screwed End) :25 Mm Dia Nominal Bore , Providing And Fixing Nipple Of 25 Mm Diaof Approved Quality (Screwed End) :100 Mm Long , Providing And Fixing Elbow Of 25 Mm Diaof Approved Quality (Screwed End) : , Providing And Fixing Float Valve Of 25 Mm Dia Of Approved Quality (Screwed End) : , Providing And Fixing Tank Nipple Of 50 Mm Diaof Approved Quality (Screwed End) : , Providing And Fixing Tank Nipple Of 25 Mm Diaof Approved Quality (Screwed End) : , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc. 15 Mm Dia Nominal Bore

Key Value

Document Fees
INR 500 /-
EMD
INR 43740.0 /-
Tender Value
INR 21.86 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail